Royal Sovereign RDS-21C10 User manual

Owner’s Manual
Royal Sovereign International, Inc. Please read and retain these instructions.
To register your product, please go to www.royalsovereign.com
RDS-21C10
10 Sheet Cross Cut Shredder

Window
Auto
Off Power Rev
Paper Entry
Over Heat
Product Diagram：

Cautions：
1. Never allow children to operate or play with the paper shredder as serious injury may occur.
2. Keep all loose articles of clothing, ties, jewelry, hair or other small items away from
the feed opening to prevent injury.
3. Do not place hands or fingers into the shredder opening as serious injury could result.
4. Keep the shredder OFF or unplugged when not in use for an extended period of time.
5. Remove all paper clips and staples from paper before shredding. The shredder will
cut staples, however continuous shredding of these metal objects can lodge in between
cutting blades and hinder the performance of the shredder.
6. Do not exceed recommended sheet capacity
7. Always limit continuous shredding to the specified time. Continuous shredding should
not exceed 2 minutes, followed by 40 minutes cooling time to allow for proper cooling
of the motor.
8. Ensure the unit is plugged into an easily accessible power outlet.
9. Always turn off or unplug the shredder prior to moving, cleaning or emptying the
wastebasket.
10. For best operation, empty wastebasket frequently
11. Do not use aerosol dusters or cleaners
12. Do not place near or over heat source or water
13. Avoid shredding envelopes, labels or anything with glue or adhesives - this will lead to
paper jams.
14. Do not attempt to repair the shredder yourself

Shredder Operation：
1.Remove the unit contents. Place the shredder head on the basket.
2.Plug the power cord into any standard electrical outlet.
3.Place the switch in the AUTO position
The shredder has 3 settings.
a. AUTO - The shredder will automatically begin shredding when paper is inserted into
the feed opening. The Power LED will be ON
b .REV is used to assist in the removal of a possible paper jam. The unit will reverses
the shredding process helping to clear the jam and clear the paper cutter.
c .OFF is used when emptying the shredder wastebasket or when the shredder is not
in use for a prolonged period of time.
Note: The Over Heat LED will turn on and shredding will stop as a safety precaution to
prevent overheating of the shredder motor. You can continue shredding once
the Over Heat LED light turns off.
Shredding Small Items：
This unit shreds 10 sheets at a time. When shredding small items such as envelopes
or credit card receipts, please insert them through the middle of the feed opening.

Trouble Shooting：
This unit is equipped with a motor overload protection device. If the motor is overheated,
power will be cut off automatically. The normal short duty cycle for continuous shredding
at maximum capacity is 2 minutes on followed by 40 minutes of cooling time.
Power may stop due to:
1.Operating the shredder at the maximum capacity continuously for a prolonged
period of time, e.g. More than 2 minutes without stopping. This operations may
result in the activation of the automatic motor overload protection, which turns off
power to the unit. Should this occur:
A.Unplug the power cord from the AC outlet and wait at least 40 minutes for
the overload protection to reset. Tear or cut off any excess paper from
the top of the shredder.
B.Plug the power cord back into the electrical outlet and place the Switch in
REV. Pull the remaining paper out of the cutters. Place the Switch back
to the Auto position if necessary.
C.Return the setting to AUTO. The shredder is now ready to resume shreding.
2.Exceeding the shredding capacity - Inserting more than 10 sheets at one time,
or if the paper is not fed squarely into the feed opening. If this happens, you should:
A.Change the switch to “REV” position. Pull out the jammed paper.
B.Change the switch to “AUTO” position, the shredder is now ready for shredding.

Specification：
Shredding Type：
Shredding Size：
Shredding Capacity：
Feed Opening：
Input：
Dimension：
Cross Cut
P-4 Security 4*35mm (.157" x 1.37")
Max 10 Sheets
220 mm (8.6")
120 V AC 60Hz
360（L）* 220 (W) * 390 (H) (14.2" x 8.7" x 15.3")

WARRANTY：
LIMITED ONE YEAR WARRANTY
Royal Sovereign warrants this product to be free from defects in material and workmanship.
Our obligation under this warranty is limited to the repair or replacement, free of charge,
when delivered to an authorized Royal Sovereign service center, of any defective part(s)
thereof, other than parts damaged in transit. This warranty is in effect to the original
purchaser, for a period of one year from the date of purchase and is not transferable.
This warranty shall apply only if the product is used in accordance with the factory provide
instructions which accompany it.
Exclusions
This warranty excludes and does not cover defects, malfunctions or failures of this product,
caused by repairs by unauthorized persons or service centers, mishandling , improper
installation, modification or unreasonable use including incorrect voltage, acts of God,
or failure to provide reasonable and necessary maintenance. This warranty is in lieu of any
and all expressed warranties. In no event shall Royal Sovereign be liable for consequential
or incidental damages. This limitation would not apply if you live in a location that does not
permit the exclusion of limitation of incidental or consequential damages.

ROYAL SOVEREIGN INTERNATIONAL, INC.
2 Volvo Dr., Rockleigh, NJ 07647 USA
TEL: [phone]
FAX : [phone]
Email: [email protected]
Because our products are subject to continuous improvement, Royal Sovereign reserves the right to
modify product design and specification without notice and without incurring any obligation E&OE
REV 02/19
RS INTERNATIONAL CANADA INC.
191 Superior Blvd.,Mississauga,ON L5T 2L6 CANADA
TEL : [phone] TF : [phone]
FAX : [phone]

Guide d’utilisation
Royal Sovereign International, Inc. Veuillez lire et conserver ces instructions.
Pour enregistrer votre produit, visitez le www.royalsovereign.com
Déchiqueteuse 10 feuilles
à coupe croisée
RDS-21C10

Diagramme du produit :
Fenêtre
Automatique
Hors fonction
Mise en/hors fonction
Inverser
Entrée du papier
Surchauffe