RS PRO 178-5732 User manual

Pull the lever unlatch and to open the door.
Panel cut-out size: 72 +0.5
0*76+0.5 0
Communication interface
Power socket
LF button:
Hold down the FEED button, paper feeding begins;
Release the FEED button, paper feeding stops.
Status Indicator：Indicator on, printer has been
switched on; indicator flashing, printer error; Indicator
off, printer has been switched off.
Equipment Panel
Printer
Clip fastening
Step 1: Insert printer into the equipment
panel cut-out
Step 2: Open paper case cover, rotate the clip
then tighten screws bolt of clip fastening.
Tighten the screws.
The torque must be less than 0.2Nm.

Warning:
When closing the paper case cover do not force it shut. The correct operation as is
follows: First, close the paper case cover gently until it’s touching the printer
housing, then press the paper case cover to make it to lock with printer head.
Paper roll
Open the door, insert paper-roll ensuring the
paper exits the printer correctly then close the
door.