RSA Lighting COMBOLIGHT Recessed Multi-Lamp Fixture User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
7.45”
5.69”
22.76”
29.08”
24.26”
33.21”
15.01”
7.19”
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
5.69”
A ... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con-
ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con-
figured for remote power.
E ... Lamps
Four (4) PAR30 Metal Halide lamps mount-
ed in adjustable double gimbals. Lamp
holders are individually removable and may
be regressed 1” for additional cut-off. Lamp
can accept up to three optical accessories
(i.e. lens + hex louver + snoot). 45º x 45º
locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless,
bayonet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.
G... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 6.49” x 23.56”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light
PAR30 Metal Halide
New Construction
Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes FOUR (4) PAR30 Metal Halide
lamps.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
rev 042408
Configuration
C4 =COMBOLIGHT
Recessed Four (4) Light
Housing
N =New Construction
C =Chicago Plenum
C4 E T
Lamp Type / Wattage Label
039M30 =39 Watt PAR30 Metal Halide
070M30 =70 Watt PAR30 Metal Halide
Power Supply
E =Electronic Metal Halide
Ballast
Power Supply
Voltage
1 =120V
2 =277V
Lamp Mechanism
G =Double Gimbal
R =Retractable Double Gimbal
Trim Finish
W =White
B =Black
S =Industrial Silver
Trim Flange
T =0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W =White
B =Black
S =Industrial Silver
For use with 39W or 70W PAR30MH lamps.