RSA Lighting Combolight 12V PAR36 User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
9.45”
26.39”
30.52”
16.01”
13.01”
45º x 45º
Adjust
Double
Gimbal
6.69”
6.69”
20.06”
Integral Low Voltage
Transformers
A ... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.
E ... Lamps
Three (3) 12V PAR36 lamps mounted in
adjustable double gimbals. Lamp holders
are individually removable and may be
regressed 1” for additional cut-off. Lamp
can accept snoot or baffle accessories. 45º
x 45º locking lamp adjustment. Beveled-
edge lamp ring is secured with threadless,
bayonet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
G... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.49” x 20.86”
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Three (3) Light
12V PAR36
New Construction
Housing
Trimless
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes THREE (3) 12V PAR36 lamps.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
rev 050108
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
Configuration
C3 =COMBOLIGHT
Recessed Three (3) Light
Housing
N =New Construction
C =Chicago Plenum
C3 N N
Lamp Type / Wattage Label
050P36 =50 Watt max. PAR36 12V
Power Supply
E =Electronic Low Voltage
Transformer
M =Magnetic Low Voltage
Transformer
Power Supply
Voltage
1 =120V
2 =277V
Lamp Mechanism
G =Double Gimbal
R =Retractable Double Gimbal
Trim Insert Finish
N =Trimless
Trim Insert
N =Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W =White
B =Black
S =Industrial Silver