Drywall Installation Concrete Installation
1. 1.
2. 2.
3. 3.
4. 4.
5. 5.
6. 6.
display is curved or recessed.
require washers.
do not require washers.
bolts
bolts
display is curved or recessed.
require washers.
do not require washers.
bolts
bolts
Carefully mount your display with the
mount arms onto the plate.
Insert the safety screws to the bottom of
the mount arms and tighten to prevent
the display from being lifted.
Carefully mount your display
with the mount arms onto the mount.
Insert the safety screws to the
bottom of the mount arms and
tighten to prevent the display
from being lifted.
Use a stud finder to locate a stud where you
wish to install your mount. Use the wall plate
as a template to mark three holes.
the mount arms to the back of your
Spacers and (E)/(G)/(H) should be used if the
back of your display is curved or recessed.
to fix display.
the mount arms to the back of your
Spacers and (E)/(G)/(H) should be used if the
back of your display is curved or recessed.
to fix display.
Choose (D)/(F) provided from the hardware kit
Choose (D)/(F) provided from the hardware kit
Drill a pilot hole at each marked location.
Fix the wall plate onto the wall using (A), (B) and (C)
provided from the hardware kit.
Fix the wall plate onto the wall using (A),
(B) and (C)provided from the hardware kit.
Drill a hole at each marked
location. Insert a concrete anchor
into each hole.
Use the wall plate as a template
to mark three holes.
