RugDoctor Pro MGH-1 User manual

USER MANUAL
Model Number
MGH-1, MSW-1, MSH-1
Quick “How To” Videos
Visit rugdoctor.com for helpful
instructional videos
rugdoctor.com | 1-800-784-3628
12253 © 2018 Rug Doctor, LLC
Motorized Grout
Cleaning Tool
FOR HOUSEHOLD USE ONLY

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
2
We are excited to share one of our innovative products with you. Your Rug Doctor Pro®
Motorized Grout Cleaning Tool has been designed to add versatility to your Rug Doctor
Pro® Deep Cleaner, allowing you to clean all floor types in your home! The product needs
to be assembled before you can put it to work.
Happy Cleaning!
THANK YOU FOR BUYING A RUG DOCTOR PRO®
MOTORIZED GROUT CLEANING TOOL
WHAT’S IN THE BOX
Handle/Hose Wand Grout Tool Head

Part #12253
rugdoctor.com | 1-800-784-3628 3
4 Important Safety Instructions
6 Preparing to Clean
7 Cleaning Your Grout
8 Cleaning and Storing
9 Change Your Brush Roll
10 Troubleshooting
11 Warranty Information
Manual Content

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
4
SAVE THESE INSTRUCTIONS FOR FUTURE USE
IMPORTANT SAFETY INSTRUCTIONS
USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS TOOL AND
MACHINE. WHEN USING TOOL AND MACHINE, BASIC PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
›Use the machine only as described in this manual. Use only Rug Doctor’s recommended attachments
and cleaning solutions.
›For indoor use only.
›Do not leave machine unattended when plugged in or while powered on. Turn off all controls before
unplugging. Unplug the machine when not in use and before cleaning or servicing. Do not unplug by
pulling on the cord. Unplug by pulling on the plug.
›Use only Rug Doctor® cleaning products intended for use with this machine.
›Do not immerse. Only use machine on surfaces moistened by the cleaning process.
›Use caution when using hot tap water. Do not boil or microwave water to be used in this machine.
›Do not allow the machine to run dry. When the Clean Water Tank runs out, stop using and follow
directions to refill.
›Do not allow this machine to be used as a toy. Close attention and adult supervision is necessary when
used by or near children. This machine is not intended to be used by children age 12 and under. Do not
allow children to place their body parts in or near openings or moving parts.
›Do not use with damaged cord or plug. If this machine is not working as it should, has been damaged
by dropping or has been left outdoors; stop using and take it to a service center.
›Do not pull by cord, carry by cord, use cord as a handle, close a door on cord, nor pull cord around
sharp edges or corners.
›Do not run machine over cord. Keep cord away from heated surfaces.
›Do not clean over floor electrical outlets.
›Do not handle plug or use this machine with wet or sweaty hands.
›Do not put any objects into opening. Do not use machine if any opening is blocked. Keep openings free
of dust, lint, hair and anything that could reduce air flow. Use extra care when cleaning on stairs.
›Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
›Turn off all controls before unplugging.
›Do not use to pick up flammable or combustible materials such as gasoline; or paints. Do not use in
areas where these may be present.
›Do not use to pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
›Do not place in or pick up anything with this machine that is a caustic or toxic material, such as bleach,
ammonia, toilet bowl cleaners or drain cleaners.
›The use of an extension cord is not recommended. Failure to follow this instruction may expose the user
to the possibility of electric shock, personal loss or injury and/or death.
›Do not operate without tanks or in any manner inconsistent with the above warnings or the operating
instructions included in this manual.
WARNING
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY
TO PERSONS OR PROPERTY DAMAGE:

Part #12253
rugdoctor.com | 1-800-784-3628 5
›Always turn off this machine before connecting or disconnecting hoses, wands or motorized nozzle.
›The attachments hose contains electric wires. Do not use or repair a damaged hose. Do not use when
the hose is cut or punctured. Avoid picking up sharp objects.
›Examine the attachment hose periodically for visible deterioration, such as abrasions, cracks, splits and
the like.
›The attachment hose is to be used only for indoor household cleaning applications.
›Do not use this machine as a vacuum.
›Always ensure float is properly installed before any wet pick-up operation.
›Product contains chemicals known to the state of California to cause cancer, birth defects, and other
reproductive harm.
›Connect to a properly grounded outlet only. See “Grounding Instructions”
WARNING
Improper connection of equipment-grounding conductor can result in the
risk of electric shock. Check with a qualified electrician if you are in doubt as
to whether the outlet is properly grounded. Do not modify the plug provided
with the machine. If the plug will not fit the outlet, have a proper outlet installed
by a qualified electrician. This machine is for use on a nominal 120 volt circuit
and has a plug that looks like the plug in Figure A. Make sure the machine is
connected to an outlet having the same configuration as the plug. No adapter
should be used with this machine.
GROUNDING INSTRUCTIONS
This machine must be grounded. If the machine should malfunction or
break down, grounding provides a path of least resistance for electric
current, to reduce the risk of electric shock. This machine is equipped
with a cord having an equipment grounding conductor and grounding
plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with the local codes and
ordinances.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Grounded
Outlet
Figure A
Grounding Pin
USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS TOOL AND
MACHINE. WHEN USING TOOL AND MACHINE, BASIC PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
6
1
1
1
2
2
2
3
3
3
Raise the
Main Handle
Open the
Vacuum
Hose Port
Connect and
Assemble the Wand
Raise the Handle
of the Pro Deep
Cleaning into the
upright position
until the handle
locks securely.
Pull the black
rubber flap
upward to open
the Vacuum Hose Port.
Align components and
connect 2 bars together
to make one wand.
Add Cleaning
Solution
Add Rug Doctor
Cleaning Solution
and warm water to
the Clean Water
Tank as per the
cleaning solution
instructions.
Connect the
Solution Hose
Connect the Wand
to the Handle/Hose
Insert the
Solution
Hose into
the Solution
Hose Port
(marked “B”).
Align components and attach
the Wand to the open end of
the Handle/Hose.
Check the
Power Button
Make sure the Power Button
is in the “off” position.
Connect the
Vacuum Hose
Connect the
Grout Tool
Insert the
Vacuum Hose
Cuff into the
Vacuum Hose
Port (marked
“A”).
Align components and attach
the Grout Cleaning Tool head
to the lower end of the wand.
PREPARING TO CLEAN
How to use:
IMPORTANT CLEANING TIP: Vacuum/clean area with a dry vacuum or microfiber mop thoroughly before
deep cleaning. Always test in inconspicuous area with small amount of cleaner before using.
CONNECT THE HOSES
ASSEMBLE THE WAND

Part #12253
rugdoctor.com | 1-800-784-3628 7
Plug in the Machine
Position the
Grout Tool
Insert plug into a properly
grounded outlet.
Position the Grout Tool in
front of the area that you
want to deep clean.
Use the grout guides
marked on the back of the
Grout Tool Head to ensure
that the tool is lined up
with the grout line.
Turn On the Machine
Turn Off the Machine
Cleaning Your Grout
Press the Power Button located on
the Main Handle to “Tool” mode.
The Tool Brush will spin as whenever
the machine is in “Tool” mode.
Press the Power Button
located on the Main Handle
to “Off” position.
Keep Power On
for 15 Seconds
Keep the machine in
“Tool” mode 15 seconds
after cleaning, to allow for
all of the dirty solution to
be collected into the Dirty
Water Tank.
CLEANING YOUR GROUT
How to use:
1
3
5
2
4
6
CAUTION
Before plugging machine
in check the Power
Button to make sure it is
in the “off” position.
Press the Trigger on the Handle/
Hose to apply solution while making
2 slow wet passes (1 forward and 1
back) over each area.
Release the Trigger
Make 2 slow dry passes (1 forward
and 1 back) to suck up the dirty
solution (do not hold down the
Trigger for this step)
Repeat as necessary.
TRIGGER
15
seconds

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
8
CLEANING AND STORING
YOUR GROUT TOOL
How to use:
1
3
2
4
Turn Machine Off
Make sure the Power Button is in the “off”
position. Unplug Machine power cord from
the power outlet.
Disconnect Solution Hose Port
Squeeze tabs on sides of
Solution Hose connector
and pull to remove from
Solution Hose Port.
Disconnect Vacuum Hose Port
Store Tool
Disconnect the
Upholstery Hose
from the Hose Port.
Refer to “Cleaning and Storing Machines” in PDC-1 manual for Machine storage Instructions
Drain excess solution from Handle/
Hose into a drain by pressing Trigger.
Clean and store Handle/Hose,
Wand, and Upholstery Tool
Head until next use. Allow Tool
to dry thoroughly before storing.
PLEASE NOTE: You can disconnect the Grout Cleaning Tool Head and break down the Wand for easy storing.

Part #12253
rugdoctor.com | 1-800-784-3628 9
CHANGE YOUR BRUSH ROLL
How to:
Ensure that Power Button is in off position and Power Cord
is unplugged before cleaning or replacing Brush Roll.
1
4
2
5
3
6
Disconnect Grout Cleaning
Tool Head from the Wand.
Turn Tool Head
upside down.
(Brush Roll
Facing ceiling).
Remove
one screw
and Brush
Roll Cover.
Remove old
Brush Roll and
replace with
new Brush Roll.
Replace Brush
Roll Cover and
screw to lock
Brush Roll back
into place.
Reconnect Hard Surface
Cleaning Tool Head to
the wand.
SCREW
Rug Doctor Pro® Tile and Grout Floor Cleaning Solution is a dual action
formula that breaks down the toughest stains and odors AND brightens
and restores grout. It is safe to use on sealed hard floors such as stone,
tile, laminate, and vinyl. Always use Rug Doctor Cleaning Solution in your
machine. Other formulas may harm your Machine and void warranty.
Available for purchase
on rugdoctor.com
ADDITIONAL
TOOLS
HARD FLOOR
TOOL
UPHOLSTERY
TOOL
Cleaning
SOLUTION
WARNING To reduce the risk of fire and electric shock due to internal component damage,
use only Rug Doctor cleaning products intended for use with the appliance.

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
10
TROUBLESHOOTING
The following Troubleshooting Guide is provided to help you
resolve issues that may arise with common usage of the machine.
PROBLEM POSSIBLE REASON HOW TO FIX
NO POWER
›Power Cord not plugged in.
›Power Button not turned on.
›Solution Hose Tool Connection is not
installed properly.
›Plug Power Cord into wall outlet.
›Press Power Button to “TOOL” position.
›Disconnect plastic Solution Hose Tool
Connection at end of small tubing and wire
by pinching on top and bottom. Reconnect
Solution Hose Tool Connection, making sure it
clicks into place. Check additional connections
to ensure they are installed properly.
NO / LOW SPRAY
›Not pressing Trigger on Handle/Hose.
›Clean Water Tank is empty or low.
›Clean Water Tank is not locked or
installed correctly.
›Valve of Clean Water Tank is clogged.
›Solution Hose Tool Connection is not
installed properly.
›Press and hold Cleaning Solution Trigger.
›Fill Clean Water Tank with water and solution.
›Lift up Clean Water Tank, and place back into
position. Tank should click into place when
positioned properly.
›Remove valve from bottom of Clean Water
Tank. Clean with warm soapy water.
›Disconnect plastic Solution Hose connector
at end of small tubing and wire by pinching
on sides. Reconnect Solution Hose connector,
making sure it clicks into place. Check
additional connections to ensure they are
connected properly.
NO / LOW
SUCTION
›Dirty Water Tank Is full.
›Dirty Water Tank is not locked or
installed correctly.
›Vacuum Hose Tool Connection is not
installed properly.
›Kink or obstruction in Vacuum Hose.
›Empty Dirty Water Tank and replace empty
tank when finished.
›Lift up Dirty Water Tank and place back into
position. Tank should click into place when
positioned properly.
›Disconnect Vacuum Hose. Reconnect Vacuum
Hose, making sure it is fully inserted into the
Vacuum Hose Port.
›Unkink or remove obstruction in Vacuum Hose.
ROTATING
BRUSH DOESN’T
ROTATE
›If something is lodged in the Brush
Roll, brush will stop rotating. Refer to
“How To Change your Brush Roll” if
further cleaning is needed.
›Power needs “reset”.
›Turn machine off and unplug Power Cord
from outlet. Check that there is nothing
stopping the brush roll from rotating. Clean
and check that the Brush Roll spins freely.
When the Brush Roll is freed, plug in the
Machine and turn the Machine on.
›There may be times when you will need
to “reset” the power if not working. To do
so, turn the power button on the Pro Deep
Machine to “CARPET” for 30 seconds. Then
turn it back to the “OFF” position. Wait 30
seconds, then turn power button back to
“TOOL”.
If you are not able to resolve or have other questions, call the customer service hotline at 1-800-784-3628.

Part #12253
rugdoctor.com | 1-800-784-3628 11
Warranty Information
Two (2) Year Limited Consumer Warranty
Rug Doctor gives the original purchaser, who retains proof of purchase, from Rug Doctor or an authorized Rug
Doctor dealer , this limited warranty (“Warranty”) for your Rug Doctor Pro Motorized Grout Tool acquired for
normal household use (commercial or rental use is excluded). You are responsible to notify Rug Doctor within
thirty (30) days of original purchase if any parts or components are missing, or if you experience any issue, with
your Rug Doctor Pro Motorized Grout Tool.
What Does This Warranty Cover / How Long Does The Warranty Last
Rug Doctor will, for the original purchaser, with proof of purchase, repair or replace (with new or remanufactured
components or products), including labor, any part that is defective in material or workmanship within two (2)
years of purchase. This warranty applies to Tools used for normal household purposes only.
What The Warranty DOES NOT Cover
The following exclusions apply to the tool and part(s) failures due to: 1) normal wear and tear; 2) tool alterations
and 3) abuse or misuse of the tool, including use not in accordance with this “User Manual”. This warranty does
not provide for a refund of the purchase price. For best operating efficiency and cleaning, use of only Rug Doctor
products is recommended. Use of the tool for rental voids the warranty and is not permitted under Federal Law
(see “Unauthorized Use” statement below). Commercial use is excluded under this warranty except as set forth
in the “ONE YEAR LIMITED COMMERCIAL WARRANTY” below. Rug Doctor is not liable for any consequential
or incidental damages of any nature involving the purchase/use of your carpet cleaning machine. In no event
shall Rug Doctor’s liability exceed the purchase price of the machine. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Expenses
If a Tool is returned to a repair center for repair within thirty (30) days of original purchase, Rug Doctor will pay
the freight charges both to a repair center and back to you. After that, you will be required to ship the Tool to a
Rug Doctor repair center should additional repairs be required after the initial thirty (30) day warranty period.
You will be responsible to pay any freight charges for shipment to the repair center for repairs occurring after
the initial thirty (30) days. Rug Doctor will pay the freight charges back to you.
How State Laws Apply
This warranty give you specific legal rights. You may also have other rights which vary from state to state.
How Do I Get Service Under This Warranty?
TO OBTAIN WARRANTY ASSISTANCE, please call 1-800 RUG DOCTOR (1-800-784-3268) (8 am to 5 pm
Mon – Fri CST) or e-mail [e-mail]. Rug Doctor will need the following information
to assist you: your name, address and telephone number, product model and serial number, proof of purchase
showing date and place of purchase. Please explain the nature of the problem. Rug Doctor will review all
the facts involved and advise you as to recommended procedure. We recommend you keep the original
carton and packing materials.
If you are not able to resolve or have other questions, call the customer service hotline at 1-800-784-3628.

RUG DOCTOR PRO® MOTORIZED GROUT CLEANING TOOL | User Manual
12
Unauthorized Use
Use of this carpet cleaning Tool with Rug Doctor trademarks for rental purposes is UNAUTHORIZED and is in
violation of U.S.C Section 1114(I) and 15 U.S.C. Section 1125 (a).
One (1) Year Limited Commercial Warranty
All of the warranty terms as expressed above shall apply in all respects, for the original United States
purchaser of a Rug Doctor Pro® Motorized Grout Tool, who purchases the machine commercially (not in
household use), except that the limited warranty period for the defects in the material or workmanship as
well as housing parts for commercial use machines shall be one (1) year. You can register your Rug Doctor
Pro® Deep Motorized Grout Tool at www.rugdoctor.com
RUG DOCTOR CONSUMER SERVICE CONTACT INFORMATION:
WEBSITE: www.rugdoctor.com/customer-support
EMAIL: [e-mail]
PHONE: [phone]
Note: You must keep your original sales receipt. It provides proof of date of
purchase in the event of a warranty claim.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
For any questions or concerns, please contact Rug Doctor
customer service representative at 1-800-784-3628

MANUAL DEL
USUARIO
Número de modelo
MGH-1, MSW-1, MSH-1
Videos rápidos “Cómo hacerlo”
Visite rugdoctor.com para obtener
útiles videos instructivos
rugdoctor.com | 1-800-784-3628
SOLO PARA USO DOMÉSTICO
EN INTERIORES
Herramienta
motorizada para
limpieza de
tapizados

HERRAMIENTA MOTORIZADA PARA LIMPIEZA DE TAPIZADOS DE RUG DOCTOR PRO® | Manual del usuario
2
Estamos contentos de compartir uno de nuestros innovadores productos con usted. Su
herramienta motorizada de limpieza de tapizados de Rug Doctor Pro® fue diseñada para
añadir versatilidad a su Deep Cleaner de Rug Doctor Pro® ¡permitiéndole limpiar todos los
tipos de pisos en su hogar! Debe armar el producto antes de ponerlo en funcionamiento.
¡Le deseamos una limpieza feliz!
GRACIAS POR COMPRAR LA HERRAMIENTA MOTORIZADA
PARA LIMPIEZA DE TAPIZADOS DE RUG DOCTOR PRO®
¿QUÉ INCLUYE LA CAJA?
Manija/manguera Varilla Herramienta de cabezal
para tapizados

Numero de pieza: 12253
rugdoctor.com | 1-800-784-3628 3
4 Instrucciones de seguridad importantes
6 Preparación para limpieza
7 Limpieza de su tapizado
8 Limpieza y almacenamiento
9 Cambiar el rodillo del cepillo
10 Solución de problemas
11 Información sobre la garantía
Contenido del manual

HERRAMIENTA MOTORIZADA PARA LIMPIEZA DE TAPIZADOS DE RUG DOCTOR PRO® | Manual del usuario
4
GUARDE ESTAS INSTRUCCIONES PARA SU USO EN EL FUTURO
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
EL USUARIO DEBE LEER Y ENTENDER TODAS LAS INSTRUCCIONES ANTES DE USAR ESTA
HERRAMIENTA Y MÁQUINA. AL USAR LA HERRAMIENTA Y LA MÁQUINA, SIEMPRE DEBEN
TOMARSE PRECAUCIONES BÁSICAS, ENTRE LAS QUE SE INCLUYEN LAS SIGUIENTES:
›Utilícela únicamente según las instrucciones de este manual. Utilice únicamente las soluciones de
limpieza y los accesorios recomendados por Rug Doctor.
›Para usar en interiores únicamente.
›No deje la máquina sin supervisión mientras esté enchufada o mientras esté encendida. Apague
todos los controles antes de desenchufarla. Desenchufe la máquina cuando no esté en uso y antes de
limpiarla o darle mantenimiento. No la desenchufe tirando del cable. Desenchufe tirando del enchufe.
›Utilice solamente los productos de limpieza Rug Doctor® destinados para su uso con esta máquina.
›No sumerja. Úsela únicamente en superficies húmedas debido al proceso de limpieza.
›Tenga cuidado cuando utilice agua caliente del grifo. No hierva ni caliente en el microondas el agua que
se utilizará en la máquina.
›No permita que la máquina funcione en seco. Cuando el tanque para agua limpia se agote, deje de usar
la máquina y siga las instrucciones para rellenarlo.
›No permita que sea utilizada como juguete. Es necesaria la supervisión de un adulto con suma atención
cuando el aparato es utilizado por niños o cerca de estos. Esta máquina no está destinada para ser
utilizada por niños menores de 12 años. No permita que los niños coloquen partes de su cuerpo en las
aberturas y piezas móviles o cerca de ellas.
›No utilice la máquina con cables ni enchufes dañados. Si esta máquina no está funcionando como
debería, se ha dañado por caerse o se dejó al aire libre; deje de usarla y llévela a un centro de servicio.
›No la remolque ni la transporte utilizando el cable, no use el cable a modo de manija, no cierre puertas
encima del cable ni tire del cable cuando esté cerca de bordes o esquinas filosos.
›No desplace la máquina sobre el cable. Mantenga el cable lejos de superficies calientes.
›No limpie sobre tomacorrientes eléctricos en el piso.
›No manipule el enchufe ni use esta máquina con las manos húmedas o sudorosas.
›No coloque ningún objeto en las aberturas. No utilice la máquina si alguna abertura está bloqueada.
Mantenga las aberturas libres de polvo, pelusas, cabellos y todo lo que pueda reducir el flujo de aire.
Tenga aún más cuidado al limpiar en las escaleras.
›Mantenga el pelo, la ropa suelta, los dedos y todas las partes del cuerpo lejos de las aberturas y las
partes móviles.
›Apague todos los controles antes de desenchufarla.
›No utilice la máquina para aspirar materiales inflamables o combustibles, tales como gasolina o pintura.
No la utilice en áreas donde puedan estar presentes.
›No use el aparato para aspirar objetos que se estén quemando o que estén despidiendo humo, como
cigarrillos, fósforos o cenizas calientes. No coloque la máquina sobre materiales cáusticos o tóxicos,
como blanqueadores, amoníaco, limpiador de inodoros y limpiadores de drenajes, ni la utilice para
aspirar estos materiales.
ADVERTENCIA
PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA,
LESIONES A PERSONAS O DAÑOS A LA PROPIEDAD:

Numero de pieza: 12253
rugdoctor.com | 1-800-784-3628 5
›No se recomienda el uso de un cable de extensión. No seguir las instrucciones precedentes puede
exponer al usuario a la posibilidad de descargas eléctricas, pérdidas o lesiones personales y/o la
muerte.
›Apague siempre esta máquina antes de conectar o desconectar la manguera, las varillas o la boquilla
motorizada.
›La manguera de los accesorios contiene cables eléctricos. No utilice ni repare una manguera dañada.
No la utilice cuando la manguera está cortada o perforada. Evite recoger objetos afilados.
›Examine la manguera de los accesorios periódicamente buscando deterioro visible, como abrasiones,
grietas, separaciones y similares.
›La manguera de los accesorios se debe utilizar solo para aplicaciones de limpieza en el interior del
hogar.
›No utilice la máquina como aspiradora.
›Asegúrese siempre de que el flotador esté instalado correctamente antes de cualquier operación de
recogida en húmedo.
›El producto contiene químicos que son conocidos en el Estado de California como causantes de
cáncer, defectos de nacimiento y otros daños reproductivos.
›Conéctela solamente a un tomacorriente conectado a tierra en forma apropiada. Consulte las
“Instrucciones para la conexión a tierra”.
ADVERTENCIA
La conexión incorrecta del conductor del equipo de conexión a tierra puede
provocar riesgo de descarga eléctrica. Consulte a un electricista calificado si
tiene dudas respecto a si el tomacorriente está conectado a tierra en forma
apropiada. No modifique el enchufe proporcionado con la máquina. Si el
enchufe no entra en el tomacorriente, haga que un electricista calificado le
instale un tomacorriente adecuado. Esta máquina está preparada para su uso
en un circuito con una capacidad nominal de 120 voltios y tiene un enchufe
que se parece al enchufe que se ilustra en la Figura A. Asegúrese de que la
máquina esté conectada a un tomacorriente que tenga la misma configuración
que el enchufe. No se debe utilizar ningún adaptador con esta máquina.
INSTRUCCIONES PARA LA CONEXIÓN A TIERRA
Esta máquina debe conectarse a un tomacorriente conectado a tierra. Si
la máquina presentara desperfectos o se rompiera, la conexión a tierra
proporciona un paso de menor resistencia para la corriente eléctrica a fin
de reducir el riesgo de descarga eléctrica. Esta máquina está equipada
con un cable que tiene un conductor del equipo de conexión a tierra y
un enchufe de conexión a tierra. El enchufe debe estar conectado a un
tomacorriente adecuado que esté instalado y conectado a tierra en forma
apropiada de acuerdo con todos los códigos y ordenanzas locales.
GUARDE ESTAS INSTRUCCIONES PARA SU USO EN EL FUTURO
Tomacorriente
con conexión
a tierra
Figure A
Clavija de
conexión a tierra
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
EL USUARIO DEBE LEER Y ENTENDER TODAS LAS INSTRUCCIONES ANTES DE USAR ESTA
HERRAMIENTA Y MÁQUINA. AL USAR LA HERRAMIENTA Y LA MÁQUINA, SIEMPRE DEBEN
TOMARSE PRECAUCIONES BÁSICAS, ENTRE LAS QUE SE INCLUYEN LAS SIGUIENTES:

HERRAMIENTA MOTORIZADA PARA LIMPIEZA DE TAPIZADOS DE RUG DOCTOR PRO® | Manual del usuario
6
1
1
1
2
2
2
3
3
3
Levante
la manija
principal
Abra el
puerto de la
manguera
de vacío
Conecte y
ensamble la varilla
Levante la manija
de limpieza Pro
Deep en posición
vertical hasta que
la manija se bloquee
de forma segura.
Tire la solapa de
goma negra hacia
arriba para abrir el puerto de la
manguera de vacío.
Alinee los componentes y
conecte las 2 barras para
formar una sola varilla.
Añada solución de
limpieza
Añada solución de
limpieza de Rug
Doctor y agua tibia al
tanque de agua
limpia acorde a
las instrucciones
de la solución de
limpieza.
Conecte la manguera
de solución
Conecte la varilla a
la manija/manguera
Inserte la
manguera de
solución en el
puerto de la
manguera de
solución (marcado
como “B”).
Alinee los componentes
y adjunte la varilla en el
extremo abierto de la manija/
manguera.
Verifique el botón
de encendido
Asegúrese de que el botón de
encendido esté en la posición
de “off” (apagado).
Conecte la
manguera de vacío
Conecte la herramienta
para tapizados
Inserte la manguera
de vacío en el
puerto de la
manguera de vacío
(marcado como “A”).
Alinee los componentes
y conecte el cabezal de la
herramienta de limpieza para
pisos duros
en el extremo
inferior de la
varilla.
PREPARACIÓN PARA LIMPIEZA
Cómo utilizar:
CONSEJO IMPORTANTE DE LIMPIEZA: Aspire/limpie el área con una aspiradora seca o un trapo
de microfibra antes de limpiar en profundidad. Siempre pruebe en un área poco visible con una pequeña cantidad de
limpiador antes de usar.
CONECTAR LAS MANGUERAS
ENSAMBLAR LA VARILLA

Numero de pieza: 12253
rugdoctor.com | 1-800-784-3628 7
Enchufe la máquina
Coloque la herramienta en
posición para tapizados
IInserte el enchufe en un
tomacorriente debidamente
conectado a tierra.
Coloque el accesorio para
tapizados delante del área que
desee limpiar a conciencia.
Use las guías para tapizados
marcadas en la parte posterior
de herramienta cabezal para
tapizados para asegurarse que
la herramienta está alineada
con la línea del tapizado.
Encienda la máquina
Apague la máquina
Limpieza de su tapizado
Presione el botón de encendido ubicado en
la manija principal y seleccione el modo de
“Herramienta”.
El cepillo girará siempre que la máquina esté
en modo “Herramienta”.
Presione el botón de encendido
ubicado en la manija principal y
colóquelo en la posición de “off”
(apagado).
Mantenga encendido
durante 15 segundos
Deje encendida la
máquina en “Tool”
(herramienta) durante
15 segundos después de
la limpieza para permitir
que toda la solución sucia
se recoja en el tanque de
agua sucia.
LIMPIEZA DE SU TAPIZADO
Cómo utilizar:
1
3
5
2
4
6
PRECAUCIÓN
Antes de enchufar
la máquina, revise el
botón de encendido
para asegurarse de que
está en la posición “off”
(apagado).
Presione el botón de la manija/
manguera para aplicar la solución
mientras hace 2 pasadas húmedas
lentas (1 hacia adelante y 1 hacia atrás)
sobre cada área.
Suelte el botón
Haga 2 pasadas lentas en seco (1
hacia adelante y 1 hacia atrás) para
aspirar la solución sucia (no mantenga
presionado el botón en este paso)
Repita la cantidad de veces necesaria
DISPARADOR
15
segundos

HERRAMIENTA MOTORIZADA PARA LIMPIEZA DE TAPIZADOS DE RUG DOCTOR PRO® | Manual del usuario
8
CÓMO LIMPIAR Y ALMACENAR SU
HERRAMIENTA PARA TAPIZADOS
Cómo utilizar:
1
3
2
4
Apague la máquina
Asegúrese de que el botón de encendido esté en
la posición de “off” (apagado). Desenchufe el cable
de la máquina del tomacorriente.
Desconecte el puerto de la
manguera de solución
Apriete las lengüetas de
los lados del conector de la
manguera de solución y tire
para quitarlo del puerto de
la manguera de solución.
Desconecte el puerto de la
manguera de vacío
Almacene la herramienta
Desconecte la manguera
de tapizado del puerto
de la manguera.
Consulte “Limpieza y almacenaje de máquinas” en el manual PDC-1 para ver las instrucciones de almacenaje de máquinas.
Seque la solución excedente de la manija/
manguera en un drenaje presionando el
botón. Limpie y almacene la manija/
manguera, varilla y el cabezal de la
herramienta para tapicería hasta el
próximo uso. Deje que la herramienta
se seque bien antes de guardarla.
TENGA EN CUENTA QUE: Puede desconectar el cabezal de la herramienta para limpieza de tapizados y
separar la varilla para guardarla más fácil.