
To stow your ARMD Batting Tee,
first lower the fiberglass and tinted
silver aluminum pipe extensions
all the way down.
While gripping the tee’s base and
red aluminum pipe, push down
and twist the pipe counter-clock-
wise until you feel it loosen
internally, and the arrow is
pointing at the ‘unlock’ icon.
While gripping the black
polycarbonate base in one hand
and the red aluminum pipe in the
other, align the arrow on the red
aluminum pipe with the ‘unlock’
icon molded into the base, insert
the pipe into the base. Push down
and twist the pipe clockwise until
you feel it lock tight into the base
and the arrow is pointing at the
‘lock’ icon.
1
2 3
Pull the pipe free from the
base. Flip the base over so
that the silver metal collar is
flat on the ground.
4
x3
NOTE: To keep your ARMD Batting Tee in
top shape, keep it out of inclement weather
and lubricate the leg joints from time to
time with a drop of machine oil.
When folding the legs back up, hold
onto the red aluminum pipe with one
hand while folding the leg with
another. Be careful to keep your
fingers away from the pinch-points on
the base when folding the legs back.
Pull up on the three self-locking legs
to unlock them and fold them up along
the pipe.
WARNING! It is very important that
the pipe is locked securely into the
base before you attempt to move it, as
the base is very heavy and can cause
injury or damage if it becomes
unattached and falls from the upper
portion when you are holding it!
V1
RUKKET ARMD BATTING TEE
stowing INSTRUCTIOns