
Install the net by attaching the
velcro material on the net edge
to the velcro on the inside of
the chipping target. Use one
hand to hold the net in place
and the other hand to press the
velcro in place.
Remove and save the oval shaped
foam piece from the center of the
target.This piece can be added
back later to increase the difculty
of the game.
Insert the ag stick into the hole
on the at side of the oating
chipping target opposite the side
with the pre-attached loop.
To play, push the oating chip-
ping target out into the pool or
use a pool cleaning net to push to
the center of the pool and hit the
foam balls off the included turf.
NOTE:The target was not
designed to be thrown into the
pool. Such action could invalidate
the warranty.
Clip one end of the string to the
pre-installed loop and attach
the other end to the ladder,
deck chair, or other xed object.
This will allow you to easily
retrieve the shipping target
between rounds. Note: Clip the
string to something close to the
pool so you don’t create a
tripping hazard.
Once you are done, pull the
string to retrieve the oating
chipping target and/or use a
pool cleaning net to scoop up
any balls that missed the
target. Repeat!
TEE-KI ISLAND GOLF CHIPPING FLOAT
assembly INSTRUCTIONS