
Join both top, side barsto thetop
crossbar.The fatter, circular receiving nut
goesinto theround holeand the
outside-threaded bolt with the squared
neck under the head goesinto thesquare
hole.Onceyou’vethreaded the bolt into
thenut correctly,seat thesquarebolt
neck into the square cut-out in order to
tighten the nut with thehexkey.
NOTE:Thecircular holes always faceto
theinsideof theframe.Thesquareholes
are alwayson the outside.
NOTE:You mayf nd it easier to join the
carriage boltstogether insidethebars by
hand-tightening thembeforeseating the
squareneckof thebolt into thebar’s
square cut-out and tightening with the
hexkey.
Attach themiddlebarswith angle-adjust-
ment platesto thetop assembly.The
adjustment platesshould be near the top
of therebounder and thesupport bar
that movesalong the plateshould beon
theinsideof therebounder.
1.
Questions?Giveusacall!(1-855)-478-5538
Top Assembly
2.
Page2
p r o d u c t s a f e t y w a r n i n g
-Keep handsand f ngers clear of all moving parts.
-When adjusting theangleof therebounder,keep positivecontrol of thetop crossbar so asnot to drop it
on your head or body.
-Place the rebounder on a level,well-drained surface. Make sure to set the rebounder up in alocation
where, when a ball misses the rebounder or ismissed by the player on itsreturn, the ball will not strike or
cause damageto people, pets, houses, or structures.
-Children should not operatetherebounder adjustment;an adult should makeadjustments.
-To prevent injury, children should not usetherebounder until properlyinstructed.
-When adjusting theangleof your rebounder, do not let go of thetop crossbar until the plunger bolts
are fullyextended into theadjustment holes.
-It isimportant to becomefamiliar with the wayaball reactsto therebounder;stand at least 30feet from
therebounder when f rst using it so you can become familiar with thespeed and power of returned balls.
-Alwayscheck for loose or missing bolts and for damageto the bungees or netting beforeuse. Loose boltsshould be tightened.
-If thereisaproblemwith thenetting or anyother part of therebounder,pleasecontact usat 1-855-4RUKKET
-Failure to heed these warningsmay result in bodilyinjury or damageto property.
p r o d u c t m a i n t e n a n c e
-Theplunger boltsshould be periodicallyoiled to maintain proper function (oil not included).
-To prolong the life of the bungees,we suggest you store your rebounder indoors, as water and UVrayswill damagethe elastic material and make
it lessef ective.
V1