Runco Reflection mbx-1 User manual

PFP™

REFLECTION™ SERIES DLP™ PROJECTORS AND PFP™ CONTROLLERS

3-CHIP DMD™ SYSTEM WITH DARK METAL PROCESS

ANAMORPHIC LENS OPTIONS

UP TO 5000 ANSI LUMENS/1100:1 CONTRAST RATIO

PFP™ CONTROLLER WITH VIVIX™ PROCESSING INCLUDED

PIXEL FOR PIXEL™

RUNCO INTERNATIONAL

DIGITAL LIGHT PROCESSING™

REFLECTION™ MBX-1

Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.

The World’s Finest Home Theater Products™

*ANSI Lumen specification:

This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in RUNCO literature to allow for direct comparison with other manufactur-

er’s projectors. These measurements can be taken at 9,000 to 13,000ºKelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.

**CSMS Home Theater Calibration ANSI Lumen Specification:

These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF specifications including setting the color temperature to 6500ºKelvin, the

standard for reproducing video.

**CSMS Home Theater Calibration foot-Lambert (fL) Specification:

This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image

brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters using

DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.

All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test

DVD, and a Da-Lite 1.0 gain, 120-inch wide screen. The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours of usage.

REFLECTION™ SERIES DLP™ PROJECTORS AND PFP™ CONTROLLERS

MBX-1 PROJECTOR SPECIFICATIONS:

Projector Type: Digital Light Processing™ (DLP™),

3-chip, .9" DMD™ — Dark Metal Process

Native Resolution: 1280 x 1024

Aspect Ratios: Determined by supplied processor

Video Standards: NTSC, PAL

DTV Compatibility: 480p, 720p, 1080i, 1080p

Scan Frequency: Horizontal: 15 – 107 KHz

Vertical: 24 – 120 Hz

Picture Size: Recommended Width: 120 – 360 in.

Maximum Width: 500 in.

Lens Options (2)/ Lens Option A: Zoom Short

Throw Distance: Throw 2.0 – 3.45:1

(Factor x Screen Width): Lens Option B: Zoom Long

Throw 3.45 – 5.50:1

(Throw distances specified with 16:

9 aspect ratio and 1.42 Anamorphic

Cinema Lens Attachment)

Contact Runco Technical Sales Support for

custom lens options and specifications

Anamorphic Options (2): 1.42 Anamorphic Cinema Attachment

1.90 Anamorphic Cinema Attachment

Horizontal and Horizontal offset varies per lens, up to 30%

Vertical Shift: Vertical offset varies per lens, up to 38%;

Built in Lens Shutter; Motorized horizontal/

vertical lens shift

Light Output: 4300 – 5000 ANSI lumens* (Depending

on lamp wattage output adjustment

setting. Full light output at 200 – 240V)

CSMS** Specifications:

Home Theater Calibration:

3890 ANSI Lumens

35 Foot-Lamberts (fL)

Contrast Ratio: 1100:1

CSMS** Contrast Ratio: 122:1

Lamp: 1.0 KW Maximum Bubble Type

Short Arc Xenon Lamp; 600-1000W

Infinitely Variable Adjustment; Built-in:

Overheat Protection, Lamp Over-usage

Protection

Lamp Life: 1500 hours @ 6500º Kelvin

Inputs: Projector: (2) 5-BNC RGB/Component,

(1) DVI w/HDCP, (2) RS-232 In/Out

Controller: (1) Composite,

(1) S-Video, (1) Component, and

(1) Pass-through

Memories: 100 individual memory locations,

PCMCIA Data Back-up

12V Output: See Controller for Specifications

Power Requirements: 100 – 240V AC, 50/60 Hz, 1.1kW at 120V,

1.5kW at 240W

Operating Environment: 40° – 95° F (5° – 35° C), 20% – 80%

humidity (non-condensing)

Dimensions Width: 26 5/8 in. (676.3 mm)

(w/out feet): Depth: 33 1/8 in. (841.4 mm)

Height: 13 1/4 in. (336.5 mm)

Weight: 203 lbs. (92.3 kg) (w/both lenses)

Regulatory Approvals: UL, FCC Class A, CE, C-Tick

The Amazing new Runco

MBX-1 takes digital projection

to a level of refinement and per-

formance beyond reach, until now.

This flagship product represents

a technological watershed, incor-

porating engineering advances

significantly beyond the heretofore

state-of-the-art.

The MBX-1 utilizes a unique and

revolutionary video processing sys-

tem capable of actually duplicating

the characteristics of film for the

first time in a fixed-pixel digital

projector. This is accomplished

through specialized circuits that

implement a 3-step process—

pre-processing, decoding and

optimizing film-originated signals;

enhancing the dynamic range for

maximum black level, contrast

and detail reproduction with-

out increasing noise levels; and

post-processing that eliminates

undesirable RGB characteristics

associated with digital projection.

Since film is not an RGB medium,

this process is key to producing a

film-like image.

With lens choice and anamorphic

options, the MBX-1 can be tailored

for use in virtually any home or

electronic cinema environment

and its tremendous light output

is suitable for screens as large as

500" wide. The companion MBX-1

Controller outputs signals that are

matched pixel-for-pixel with the

native projector resolution, elimi-

nating any video artifacts while

faithfully processing input signals.

FEATURES:

• Variable Light Ouput up to 5000 ANSI Lumens

• 3-Chip DLP™ System with New, Dark Metal Process

Technology

• 1280 x 1024 Resolution

• Image Sizes up to 500" Wide

• Unique Processing System Designed to Accurately

Reproduce the Look of Film

• Motorized Horizontal and Vertical Lens Shift

• Multiple Lens and Anamorphic Attachment Options

Runco International®

2900 Faber Street, Union City CA 94587

Tel: 510-324-7777 • Fax: 510-324-9300

www.runco.com

5/03

Aspect Ratios: Anamophic, Letterbox,

4:3 (on either 16:9 or 4:3 screens)

Input Standards: NTSC/PAL

Outputs: Native Resolution: 1024p;

HD Pass-through: Up to 1080p

Inputs: (1) Composite, (1) S-Video,

(1) Component, (1) Pass-through

Control Options: Infrared (with discrete on/off, aspect

ratio and source selection), RS-232, and

Front Panel

Screen Trigger/ (2) 12V DC, 1/8A

Masking Outputs:

Bandwidth: Video inputs: 5.5 Mhz,

Pass-through: 100 Mhz

Power Requirements: 100 – 240V AC (auto sensing) 50/60 Hz,

15W

Operating Environments: 41° – 95° F, (5° – 35° C), 0% – 90%

Humidity (non-condensing)

Dimensions: Width: 17 1/2 in. (444.50 mm),

(w/out feet) Depth: 16 in. (406.40 mm),

Height: 3 1/2 in. (88.90 mm),

Weight: 16 lbs. (7.3 kg)

Included Accessories: Rack mounting brackets

Regulatory Approvals: Complies with FCC Class B, CE, C-Tick

Warranty: (1) One year parts and labor from

the date of delivery to the end user

Call factory for more specific information on export specifications. Specifications are subject to change without notice. Optional ceiling bracket available.

CONTROLLER SPECIFICATIONS (Included with the MBX-1):

Other Runco Projector manuals