Russell Hobbs RHSC055 Installation guide

INSTRUCTIONS AND WARRANTY
MODEL NO. RHSC055
RUSSELL HOBBS 500W STICK BLENDER SET

2
Thank you for purchasing the Russell Hobbs 500W Stick Blender Set. Each unit has
been manufactured to ensure safety, reliability and ease of use. Before use, please read
the instructions carefully and keep it for future reference. Should you pass the unit on,
please ensure that you also pass the Instruction Manual on.
FEATURES OF THE RUSSELL HOBBS 500W STICK BLENDER SET
•Powerful 500W motor
•2 Speed function
•Stainless steel blending stick with inner stainless steel shaft
•This complete set includes the stainless steel, stick blending leg, balloon whisk,
1.5L chopping bowl, stainless steel chopping blade, reversible slicing and
shredding disc, and mixing/ measuring beaker
•Easily detachable for no fuss cleaning
•Rubberised comfort-grip accents
•Ergonomically designed with built-in safety device
•Blend, whip, chop and slice your favourite recipes!
•Ideally suited for making delectable sauces and soups, making home-made
purées, cocktails, preparing fresh salad ingredients, salsa’s, processing of
cheese and so much more!
•Includes recipes
•For domestic use only
•1 year warranty
NOTE: USE EXTREME CARE WHEN HANDLING THE BLADE; DO NOT TOUCH THE
BLADE WITH YOUR FINGERS. THE BLADE/S ARE SHARP AND CAN CAUSE
INJURY.

3
IMPORTANT SAFEGUARDS
When using your Russell Hobbs Stick Blender, basic safety precautions should always
be followed including the following:
CAUTION: This appliance is not for professional use. It has a powerful motor which
results in a highly efficient kitchen tool. There should be no need to run the motor for
longer than the advisory cycle times below.
PLEASE FOLLOW THESE CYCLE TIMES TO HELP PROLONG THE LIFE OF YOUR
APPLIANCE:
If blending ‘solid’ or ‘sticky’ ingredients, please use your blender for no longer
than 30 seconds at a time. After blending for 30 seconds, switch your blender off
for 10-15 minutes to avoid damaging the motor.
If blending ‘liquid’ ingredients, please use your blender for no longer than 1-
minute at a time. After blending for a minute, switch your blender off for 10-15
minutes to avoid damaging the motor.
Please use the chopper attachment for no longer than 20 seconds at a time.
After chopping for 20 seconds, switch your blender off for 10-15 minutes to avoid
damaging the motor.
1. Please read the instructions carefully before using any appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains
voltage in your home.
3. Incorrect operation and improper use can damage the appliance and cause injury
to the user.
4. The appliance is intended for household use only. Commercial use invalids the
warranty and the supplier cannot be held responsible for injury or damage
caused when using the appliance for any other purpose than that intended.
5. Always disconnect the appliance from the power supply if it is left unattended and
before assembling, disassembling or cleaning.
6. Avoid any contact with moving parts. Never touch the rotating tools while still in
motion - always wait for them to come to a complete stop.
7. Close supervision is required when any appliance is used near or by children or
invalids.

4
8. Check the power cord and plug regularly for any damage. If the cord or the plug
is damaged, it must be replaced by the manufacturer or a qualified person in
order to avoid an electrical hazard.
9. Do not use the appliance if it has been dropped or damaged in any way. In case
of damage, take the unit in for examination and/or repair by an authorised service
agent.
10. To reduce the risk of electric shock, do not immerse or expose the motor
assembly, plug or the power cord to water or any other liquid. Do not use it with
wet hands.
11. Never immerse the unit in water or any other liquid for cleaning purposes.
12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to
disconnect the appliance from the mains. Always unplug the unit when not in
use, before cleaning or when adding or removing parts.
13. Insert only original parts. The use of accessory attachments that are not
recommended or supplied by the manufacturer may result in injuries, fire or
electric shock.
14. A short cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord
is not in a position where it can be pulled on inadvertently.
16. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas
or electric burner or in a heated oven.
17. Do not use the appliance on a gas or electric cooking top or over or near an open
flame.
18. Keep the appliance and cord away from direct radiant heat from the sun, from
damp, from sharp edges and other dangers.
19. Use of an extension cord with this appliance is not recommended. However, if it
is necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the appliance to avoid overheating of the extension cord,
appliance or plug point. Do not place the extension cord in a position where it can
be pulled on by children or animals or tripped over.
20. This appliance is not suitable for outdoor use. Do not use this appliance for
anything other than its intended use.
21. DO NOT carry the appliance by the power cord.

5
22. Do not leave this appliance unattended during use. Always unplug the unit when
not in use or before cleaning.
23. Always operate the appliance on a smooth, even, stable surface. Do not place
the unit on a hot surface.
24. Do not operate this appliance by means of an external timer or remote control
system.
25. Never use this appliance to mix, blend or stir anything other than foods.
26. Do not use during cooking processes or with boiling liquids.
27. The blade/s are very shape. Take care when handling the sharp cutting blade/s,
emptying the bowl and during cleaning.
28. Ensure that the switch is in the “0” / “Off” position after each use.
29. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
30. In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this machine.
31. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
32. Children should be supervised to ensure that they do not play with the appliance.

6
PARTS DIAGRAM –500W STICK BLENDER (MODEL: RHSC055)
(1) Speed Control
(2) Main Housing
(3) Pusher
(4) Chopping Bowl
(5) Measuring Beaker
(6) Stainless steel blending leg attachment
(7) Slicing and shredding disc
(8) Balloon whisk

7
BEFORE FIRST USE
Before using your appliance for the first time take the appliance out of the box and take
off any protective wrappings. REMEMBER: DO NOT LEAVE PROTECTIVE
PACKAGING LYING AROUND, AS IT COULD BE DANGEROUS AROUND INFANTS.
Wash the blending leg, and accessories in warm soapy water, rinse well and dry. Wipe
the main motor unit with a slightly dampened cloth.
OPERATING INSTRUCTIONS
Your stick blender is designed to help you prepare everything from soups to chocolate
mousse quickly and with minimal effort.
1. Ensure the stick blender is unplugged or switched off at the wall socket.
2. Insert blender leg or balloon whisk to the motor unit and turn in a clockwise position
until the two parts are locked together
3. Put the ingredients into a mixing bowl, beaker or a different durable bowl, which is
sufficiently tall and wide to avoid splashing.
4. Plug the unit into the mains power supply.
5. Dip the blending leg or balloon whisk as deep as possible into the mixture.
NOTE: Do not immerse the stick blender/ balloon whisk in food or liquid
above the “MAX” indicator line of the measuring beaker. When choosing not
to use the beaker, ensure that the blender/ balloon whisk is not immersed
beyond the point where the blending leg or balloon whisk join with the motor
body.
.

8
NEVER USE YOUR APPLIANCE IN A BOWL OR SAUCEPAN WHILE
COOKING.
FOR BEST RESULTS:
Use a wide container.
Only whip up to 400ml chilled cream (min. 30% fat content, 4-8ºc).
Only whip up to 4 egg whites.
Move the whisk in a clockwise direction through the food preparation.
SUGGESTIONS FOR USE
Move the blending leg and blade gently around the mixture to ensure uniform
results.
If you want to clean the sides and base of the beaker/container with a hand-held
utensil, first switch the machine OFF (by switching it off at the wall socket).
To avoid unnecessary splashing, immerse the blending leg and blade into the
mixture before switching the appliance ON.
The speed can be adjusted at any time. Use the LOW speed setting for the
thicker consistency. Use the HIGH speed setting for finer consistency.
GETTING TO KNOW YOUR CHOPPER ATTACHMENT
The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots,
walnuts, almonds, prunes etc. It is not recommended to use the chopper to chop flour.
NOTE: Do not chop extremely hard food such as nutmeg, coffee beans and
grains.
BEFORE CHOPPING
Pre- cut meat（200g at 2cm x 2cm x 2cm, cheese, onions（100g）, garlic,
carrots (200g), and chillies.
Remove stalks from herbs, de-shell nuts.
Remove bones, tendons and gristle from meat.

9
OPERATING THE CHOPPER ATTACHMENT
1. Carefully remove the plastic cover from the blade. Caution: the Blade is very
sharp! Always hold it on the upper plastic part.
2. Place the blade on the centre pin of the chopper bowl.
3. Place the food in the chopper bowl.
4. Put the chopper gear box on to the chopper bowl.
5. Insert the motor part into the gear box until it locks.
6. Use the low or high speed to suit preference.
7. During processing, hold the motor part with one hand and the chopper bowl with
the other hand.
8. After use, remove the motor part first and then detach the chopper gear box.
9. Remove the blade from the bowl carefully. Remove the processed food from the
chopper bowl.
CLEANING AND MAINTENANCE
NOTE: Use extreme care when handling the blade at the bottom of the blending leg. Do
not touch the blade with your fingers. The blade is very sharp and can cause injury.
Make sure the unit is switched off and unplugged from the main power supply.
Disconnect the blending tool (blending leg/ balloon whisk / chopper) from the
motor.
It is much easier to clean the accessories directly after their use.
Clean the motor unit, whisk gear box and chopper gear box (I) with a damp cloth
only and dry thoroughly.
Clean the blending leg attachment in warm soapy water, rinse and dry
thoroughly.
Clean the measuring beaker, whisk, chopper blade, slicing disc and chopper
bowl in the dishwasher. Alternatively wash in warm, soapy water, rinse and dry
well.
To remove stubborn spots wipe the surface with a piece of cloth slightly
dampened in soapy water. Follow with a clean damp cloth.
When processing foods with colour (e.g. carrots), parts of the appliance may
become discoloured. Wipe these parts with vegetable oil before washing them.

10
Do not use any abrasive cleaning material to clean any part of the stick blender,
as it will harm the exterior.
CAUTION: The stick blender motor should never be submerged in water or held under
running tap water. To clean, simply wipe with a damp cloth and dry thoroughly.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
RECIPES
STRAWBERRY SHAKE
Ingredients
½ Cup vanilla ice cream
½ Cup milk
½ Cup fresh strawberries (Other type of fruit can be used such as: peaches,
pineapple, and banana)
1 ½ Tablespoons powdered sugar
Directions
Attach the blending leg to the motor body. Place the ingredients into the mixing
bowl. Blend on the HIGH speed for 25-30 seconds. Makes one shake.