Russell Hobbs RHCHS1001-C User manual

Model Number: RHCHS1001-C
Turbo Lite
Corded Handheld Stick Vacuum
For Customer Services & Spare Parts please call0345 2097461
Opening times: Monday -Friday 8am –8pm & Saturday 9am –1pm
Or visit us at www.productcare.co.uk
PLEASE RETAIN
FOR FUTURE REFERENCE

Contents
Page
Safety
instructions
…………………………….………..
3
Energy
Performance Label
………………………………....…..
6
Feature diagram
………………………………....…..
7
Unpacking your
vacuum cleaner
……………………………….……..
8
Assembling your vacuum cleaner
………………………………………
9
How to empty the dust
container
………………………………………
11
How to clean the filter
………………………………………
12
How to change the fuse
………………………………………
13
Troubleshooting
………………………………………
14
Connection to the mains supply
………………………………………
15
Notes
………………………………………
16
Guarantee & Customer Services
………………………………………
18
Spare Parts
………………………………………
19
2
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am –8pm & Saturday 9am –1pm
Or visit us at www.productcare.co.uk
Thank you for purchasing your Turbo Lite Corded Handheld Stick Vacuum.
To get the best from your new cleaner, take a few moments to read these
instructions and keep them in a safe place for future reference.
Should you require any further assistance, our friendly Product Care team will
be happy to help.

Safety instructions
WARNING:
•It is hazardous for anyone other than a competent person
to carry out any service or repair operation that involves
the removal of a cover which gives protection against
exposure to electrical parts.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•This product is intended for household use only.
Do not use outdoors.
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children should not play with the
appliance. Cleaning and user maintenance should not be
made by children unless they are older than 8 and
supervised. Keep the appliance and its cord out of reach of
children less than 8 years.
•Do not operate this appliance for anything other than its
intended use.
•Do not immerse in water or other liquids for cleaning.
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
3

Safety instructions
•DO NOT direct at people, animals, electrical outlets, or
equipment containing electrical components.
•Unplug from outlet when not in use. Do not leave the
cleaner unattended while plugged in.
•DO NOT use with damaged cord or plug.
•DO NOT use vacuum cleaner if it has been dropped,
damaged, left outdoors or dropped into water.
•Keep the vacuum cleaner away from water; do not allow it
to get wet. If unit is wet, do not plug unit into wall socket
or turn unit on.
•DO NOT pull or carry by cord, use cord as a handle, close
door on cord, pull cord around sharp corners or edges, or
expose cord to heated surfaces.
•DO NOT unplug by pulling on cord.
•To protect against electrical shock do not immerse cord,
plug, or appliance in water or other liquid.
•Unplug from the mains outlet when not in use, before
putting on and taking off parts, and before cleaning.
•The use of accessory attachments not recommended by
the appliance manufacturer may cause fire, electric shock
or injury. Only use the accessories supplied by the
manufacturer.
•DO NOT let the cord hang over the edge of the worktop, or
touch hot surfaces.
4

Safety instructions
•This cleaner is intended for internal household use only, do
not use outside or for anything other than its’ intended
purpose.
•DO NOT use this vacuum to pick up water or any other
liquids, combustible substances or hot/burning objects.
•Only use the unit when fully assembled.
•NEVER place your fingers or other objects into any part of
the cleaner. Be aware that loose clothing or hair may
become trapped in the cleaner if improperly used.
•Before use, ensure that all of the air vents of the cleaner
are clear and there is no restriction of air flow.
•Caution: Exhaust air discharged from the sides of the
cleaner may extinguish a gas fire, pilot light, or disturb
ashes in an open fire. Always avoid directing the cleaner
toward naked flames.
•Important: This cleaner has a thermal safety device which
automatically cuts off the power supply in case of over
heating. If the safety device has switched the cleaner off,
unplug from the mains and allow the cleaner to cool
down. Once the cleaner has cooled it can be plugged back
in to the mains and used as normal. This takes
approximately 15 minutes to reset.
•NEVER wrap the power cord around the appliance. This
can cause the cord to become damaged leading to
electrical failure.
5

Energy Performance Label
6

Feature diagram
7
1. Floor head
2. Extension tube
3. Extension tube release
button
4. Dust container release
button
5. Power switch
6. Dust tank
7. Nozzle
8. 2 in 1 crevice and brush tool
9. Connecting joint tool
1
2
3
5
6
7
8
4
9

Unpacking your vacuum cleaner
8
Powering the cleaner
Plug the power cord into a wall socket.
Push the power switch on the top of the machine, shown
in the circle below, to switch the cleaner on and off.
Before using your vacuum cleaner
Remove all packaging and lay out the separate components.
Check the unit after unpacking for any visual damage such as:
•Misaligned or damaged parts
•Damage to the main body and separate components
•Damage to the plug or cable.
If you can see any damage do not use the vacuum cleaner
and contact customer services

1. To attached the extension tube, insert the connecting joint tool
into the nozzle of the main vacuum cleaner. Then push the end of the
extension tube into the connecting joint until securely in place.
Assembling your vacuum cleaner
2. Slot the cleaning head on to the end of the extension tube.
9
3. Adjust the telescopic tube to the desired
height by pushing the tube extension
button upwards and pulling the inner tube
downwards.

Attaching the tools
2 in 1 crevice and brush Tool
The 2 in 1 crevice and brush tool can be used for cleaning hard
to reach areas, dusting and cleaning delicate surfaces.
To use the 2 in 1 crevice and brush tool, first attach the
connecting joint tool into the nozzle of the vacuum. Once
secure, push the 2 in 1 crevice tool into the connecting joint.
Slide the brush to the end of the tool until securely in place.
To use the brush tool, slide the brush to the end of the tool until it
clicks into place. To use the crevice tool, slide the brush back to
expose the crevice tool.
10
Assembling your vacuum cleaner