Rustic State PASSI ZIMAY128 User manual

1
Hardware Included
As a courtesy, we have included basic drywall anchors and screws for your convenience. We recommend mounting this product on wall studs
for a more secure installation. When mounting on wall studs, you will NOT need to use the included anchors, as they will not be necessary; the
included screws will be sufficient. When mounting on hollow spaces on walls, make sure to use the included anchors and screws together.
RUSTIC STATE
PASSI 3 Tier Shelf
Tools Needed
Box Content
Assembly Instructions
As a general rule, it’s always ideal to install the wall mountable products on wall studs without fasteners. If it isn’t possible, as a courtesy
we have included basic drywall anchors and screws for your convenience. However, different wall materials may require different anchors
and screws. If necessary, please obtain proper hardware suitable for your walls from your local hardware store.
STEP 1
WARNING: Please do not mount this item above cribs, beds or changing tables.
Place the support wooden rod on the side of the base wooden frames to match the
screw holes. Insert the steel assemble screws and screw them using the allen key.
(Each base wooden frame has 9 screw holes, you can move and adjust any number
of combinations based on your requirement.)
Support wooden rod [×1]
Base wooden frame [×3]
Steel assemble screw [×6]Steel wall screw [×2] Allen key [×1] Mini level [×1] Zinc wall anchor [×2]
Option 1 Option 2
Option 3
×6

2
STEP 2
STEP 4
STEP 3
Place the shelf at desired place on the wall and straighten
it by using mini level and mark the screw holes.
Install the anchors on the marked points.
WallWall
Wall
x2
x2
Insert the screws into anchors.
x2
Broken line
down
Mini level