Rustic State ZIMAY107 User manual

Hardware Included
As a courtesy, we have included basic drywall anchors and screws for your convenience. We recommend mounting this product on wall studs
for a more secure installation. When mounting on wall studs, you will NOT need to use the included anchors, as they will not be necessary; the
included screws will be sufficient. When mounting on hollow spaces on walls, make sure to use the included anchors and screws together.
RUSTIC STATE
SMITH LEDGE
Tools Needed
Box Content
Assembly Instructions
As a general rule, it’s always ideal to install the wall mountable products on wall studs without fasteners. If it isn’t possible, as a courtesy
we have included basic drywall anchors and screws for your convenience. However, different wall materials may require different anchors
and screws. If necessary, please obtain proper hardware suitable for your walls from your local hardware store.
STEP 1
WARNING: Please do not mount this item above cribs, beds or changing tables.
Ledge [×1]
Zinc anchor [×2] Silver combo screws [×2]Mini level [×1] Allen key [×1]
Easy
keyhole bracket
Marking
screw
x2
Hold the wooden shelf and turn screws off for both side from
hanging bracket hook by using allen key.
(Screws should stick out enough to make marks on the wall
as shown).
1

STEP 2
STEP 4
STEP 3
Hang the shelf on the wall. Make sure the shelf is 90 degree against wall.
Install the anchors on the marked
points. Insert screws into anchors,
leave some 0.25inch out.
WALL
0.25“
Place shelf at desired location on the wall by using mini
level and press the shelf towards wall. The two marking
screws on brackets will make accurate mark on the wall.
(For future use, turn the marking screws back after the
marking is complete).
2
WALL
Broken line
down
Mini level