Ryobi OBL-1801 User manual

CORDLESS BLOWER
OPERATOR'S MANUAL
OBL-1801
BATTERIES AND CHARGERS SOLD SEPARATELY

Important!
It is essential that you read the instructions in this manual before
mounting and operating this machine.
Subject to technical modifications

1
3
2
FIG. 1
FIG. 2
1
2
3
1
4
5FIG. 3

TOP VIEW
FIG. 4
2
FIG. 5

Page 1
ENGLISH
WARNING:
When using battery operated tools basic safety
precautions should always be followed to reduce
the risk of fire, leaking batteries and personal injury,
including the following.
Read all these instructions before operating this product
and save these instructions.
Read the operation manual and follow all
warnings and safety instructions.
Wear eye protection and ear protection.
Do not use this machine in wet weather
conditions!
Wear protective clothing and boots
Wear non-slip, heavy duty gloves.
Keep all bystanders at least 15m away.
Failure to keep long hair away from the air
inlet could result in personal injury.
Do not operate without tubes in place.
Failure to keep loose clothing from being
drawn into air intake could result in personal
injury.
READ ALL INSTRUCTIONS BEFORE OPERATING
nDo not allow children or untrained individuals to use
this unit.
nWear heavy long trousers, non-slip safety footwear
and gloves.
nNever operate unit while bare foot or wearing open
shoes.
nDo not wear loose clothing, or jewelry that might get
entangled in this unit.
nKeep all bystanders, children, and pets at least 15m
(50 feet) away. Remember that the operator or user is
responsible for accidents occurring to bystanders, their
property, as well as themselves.
nCheck for damaged parts. Before further use of the
appliance, any part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function.
nCheck for breakage of parts and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by
an authorized service center. Following this rule will
reduce the risk of shock, fire,or serious injury.
nDo not force the product. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
nDo not overreach. Keep proper footing and balance at
all times. Proper footing and balance enables better
control of the product in unexpected situation.
nSecure long hair so it can not become entangled in
moving parts or air intake.
nDo not operate this unit when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
nDo not operate in poor lighting.
nNever let anyone use your unit who has not received
adequate instructions in the unit’s proper use.
nKeep the handles dry and clean.
nConsider work area environment. Do not expose power
tools to rain. Do not use power tools in damp or wet
locations. Keep work area lit. Do not use power tools
where there is risk to cause fire or explosion.
nStore battery or idle tools. When not in use, tools and
batteries should be stored separately in dry, high or
locked up place out of reach of children. Ensure that
battery terminals cannot be shorted by other metal
parts such as screws, nails, etc.
nDisconnect the tool from its battery pack when not in
use, disconnecting the blower tube before service.
nAvoid unintentional starting. Do not carry the tool with
a finger on the switch.
nStay alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
nHave your tool repaired by a qualified person. This tool
is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in
considerable danger to the user.
WARNING:
Use only the manufacturer’s replacement parts.
Failure to do so may cause poor performance,
possible injury and may void your warranty.
RULES FOR SAFE OPERATION

Page 2
ENGLISH
RULES FOR SAFE OPERATION
BATTERY TOOL USE AND CARE
nEnsure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
nRecharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
nUse power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk
of injury and fire.
nWhen battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
nUnder abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
SAVE THESE INSTRUCTIONS. REFER TO THEM
FREQUENTLY AND USE THEM TO INSTRUCT OTHERS
WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE THIS
UNIT, LOAN THEM THESE INSTRUCTIONS ALSO.
PRODUCT SPECIFICATIONS
Weight.......................................................................1.5kg
Motor ................................................................... 18 V DC
Air Velocity ......................................................... 190 km/h
Battery pack (not included):..........................BPP-1817M
...../ BPP-1815M / ABP1801
Charger (not included):....................................... BC-1800
................/ BC-1815S / ACR1800
FEATURES
DESCRIPTION
1. Blower housing outlet
2. Power switch
3. Blower tube
4. Latches.
5. Battery pack (Not included)
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding
of the information on the blower and in this operator’s
manual as well as a knowledge of the project you are at-
tempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
ASSEMBLY
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the blower when assembling parts.
ASSEMBLING THE BLOWER TUBE
See Figure 2.
nWith the logo area facing up, slide the blower tube over
the outlet on the blower housing.
nPress down on the tab on the blower housing outlet.
nPush tab on outlet on the blower housing down until
it locks into place through the opening in the blower
tube.

Page 3
ENGLISH
OPERATION
WARNING:
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
sufficient to inflict serious injury.
APPLICATIONS
You may use this tool for the purposes listed below:
n
Clearing hard surfaces such as driveways and walk-
ways
nKeeping decks and driveways free from leaves and
pine needles
TO INSTALL BATTERY PACK
See Figure 3.
nPlace the power switch in the OFF ( O ) position.
nPlace the battery pack in the blower. Align raised rib on
battery pack with groove in the blower’s battery port.
nMake sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
blower before beginning operation.
CAUTION:
When placing battery pack in the blower, be sure
raised rib on battery pack aligns with the back of
the blower and latches into place properly. Improper
installation of the battery pack can cause damage to
internal components.
TO REMOVE BATTERY PACK
See Figure 3.
nPlace the power switch in the OFF ( O ) position.
nLocate latches on side of battery pack and depress
both sides to release battery pack.
nRemove battery pack from the blower.
STARTING/STOPPING THE BLOWER
See Figures 4.
nTo start the blower, place the power switch in the ON
( l ) position.
nTo stop the blower, place the power switch in the OFF
( O ) position.
WARNING:
Battery tools are always in operating condition. There-
fore, switch should always be in the OFF position when
not in use or carrying at your side.
OPERATION
OPERATING THE BLOWER
See Figure 5.
nTo keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the
center of a pile.
nTo reduce sound levels, limit the number of pieces of
equipment used at any one time.
nUse rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when
water is available.
nConserve water by using power blowers instead of
hoses for many lawn and garden applications, including
areas such as gutters, screens, patios, grills, porches,
and gardens.
nWatch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
nAfter using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
MAINTENANCE
WARNING
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
WARNING
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.

Page 4
ENGLISH
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
STORING THE BLOWER
nClean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
DISPOSAL
Waste electrical products should not be disposed of
together with household waste. Please recycle where
facilities exist. Check with your local authority or retailer
for recycling advice.

Page 5