S.D.P. EZ Track 4100 Reference guide

EZ Track 4100
Training & Procedure Manual

Load Capacity
• One of the most important
considerations when operating
this machine is the Load
Capacity of the EZ Track’s
boom. The maximum weight
capacity of the EZ Track 4100.
•
The load capacity of the boom
•
The load capacity of the boom
depends upon the distance
from center line of boom turret!
• CAUTION! UNIT MUST BE
LEVEL.

EZ Track 4100 Safety
While the EZ Track 4100 is smaller than a
line truck, its function is the same and all
safety precautions that would apply to a line
truck also apply to the EZ Track 4100. The
truck also apply to the EZ Track 4100. The
EZ Track 4100 is a powerful machine that
should be operated with respect & caution.
Misuse or carelessness can result in serious
injury, property damage or death.

Hard hats and
protective gear must be
worn by all personnel
when using the EZ
Track 4100.
Track 4100.

4101
• The capacity of the EZ Track
4100 is rated at 4100 pounds
which means that the most the
boom will ever safely lift is
4100 pounds. Refer to the
load capacity chart or on the
machine itself for more specific
indications of the mini-derrick’s
capacity.
capacity.
• Properly use all outriggers
whenever the boom is in use.
The EZ Track 4100 boom must
never be operated without the
outriggers being properly set.
DANGER!
ALL OUTRIGGERS MUST
BE FULLY EXTENDED
BEFORE OPERATING
THE CRANE!

Safety Guidelines
• Before operating any heavy machine, it is important to learn its
safety rules. All of your existing in-house safety precautions must
be followed as well as the precautions listed in this manual.
• The EZ Track 4100 is not electrically insulated until final stage
manual boom is extended and pinned into place. Be sure to
manual boom is extended and pinned into place. Be sure to
follow your company’s safety procedures to protect against
electrocution.
• The EZ Track 4100 is not designed to carry passengers. Never let
anyone ride on the machine.
• Operators must be properly trained before operating any part of
the EZ Track 4100. Properly set the outriggers whenever the
boom is in use.

Safety Guidelines
• Operate the EZ Track 4100 in a well-ventilated area
only. The engine emits exhaust gases, which can cause
sickness and death.
• The EZ Track 4100’s controls react to input rapidly.
Know the location and function of all controls before
starting the machine.
starting the machine.
• The EZ Track 4100 can be shut down in an emergency
by releasing all drive controls and turning the ignition
switch to the “off” position.
• Take care that the EZ Track 4100 is properly secured on
its trailer before transporting it.

Pre-trip Inspection
• Before each day’s operation,
the EZ Track 4100 must be
inspected by the operator.
• Do a visual inspection to check
for lose, worn, missing or
broken parts such as bolts,
broken parts such as bolts,
nuts, wires & retaining pins.
a. Check hydraulic hoses for
cuts, wear, loose
connections.
b. Check engine and hydraulic
system.

Pre-trip Inspection
Check all tires on the
EZ Track 4100 trailer for
EZ Track 4100 trailer for
wear & proper inflation.

Pre-trip Inspection
Test all turn signal,
parking and brake
lights by turning them
on. Be sure to test the
braking action on the
braking action on the
trailer before traveling
to the work site.

Pre-trip Inspection
• Check to make sure
that EZ Track 4100 is
properly secured to
the trailer.
• Look inside the trailer
toolbox & make sure
it contains all tools &
equipment necessary
for operating the EZ
Track 4100.

Pre-trip Inspection
Turn on the remote
control & check the
function of all controls.
Always check if the
battery is charged.

Pre-trip Inspection
Inspect the lift line and
hook for signs of wear
or damage. Replace
any worn or damages
parts before using the
parts before using the
EZ Track 4100.
(Pictures may not be a true representation of your machine.)

EZ Track 4100 Controls
Familiarize yourself with all of the
controls and layout of the controls on
the machine.
As the operator you need to know!

Remote Control Basic
Operation
A. Turn E-stop counter-
clockwise to turn on remote
and press to shut off remote.
B. Auger switch: A position to
dig, B position to reverse
(clean).
NOTE: Auger will stop digging
during overload, reverse
auger to stop overload.
Audible alarm will sound.
B A

Driving the EZ Track 4100
The EZ Track 4100 does not require its full engine power when
moving. Set the engine speed relatively low when driving the
unit, reserving the higher engine speeds for powering hydraulic
accessories.

Unloading the EZ Track 4100
• Caution: While unloading the
EZ Track 4100, always have
the trailer attached to a truck
and the boom in its lowest
position.
• Note: If the EZ Track 4100
engine is not started, start it
and let it warm up for 5
minutes.

NOTE: The EZ Track 4100 is secured for transport at the front
and back of the trailer.
(Pictures may not be a true representation of your machine.)

Moving the EZ Track 4100
One of the advantages of the EZ Track
4100 is that it is tough enough to
operate in areas which are considered
too rugged to use a line truck.

Lifting and carrying a pole can be performed easily with the
hydraulic outriggers.
EZ Track 4100
Transporting a Pole
Attach the provided lifting chains
to the pole and to the d-rings on
the EZ Track 4100 outrigger
arms as shown.