S4A U-P001 User manual

Proximity RFID Card Reader Manual
U-P001
Please read the manual carefully before using the Device
1.Features
> Metal shell, anti-vandal
> Very low power consumption,standby current less than 30mA
> WG 26 output
> Fast Search speed : time between reading card and opening the door is less than 0.1S
2.Specifications
Operating Voltage
9-12V DC
Card type
EM/Mifare
Reading Distance
3-6 cm
Quiescent Current
≤30mA
Operating Temperature
-45℃～60℃
Operating Humidity
10%- 90% RH
Waterproof
Conforms to IP68
Dimension
110*48*20 MM
3.Installation
> Drill the holes on the wall according to the hole size of the back cover or install the cable box
on the wall. And Fix the back cover firmly on the wall with the supplied screws. (Picture below)
> Thread the cable through the cable hole, connect the wire needed, wrap unused wire with
insulating tape in case of short circuit
> Fix the front cover to the back cover with screw driver

4.Wiring
Wire No.
Function
Color
Description
1
LED
Blue
Connect controller LED
2
Beeper
Yellow
Connect controller beeper
3
D0
Green
WG output line D0
4
D1
White
WG output line D1
5
+12V
Red
Power supply +12V
6
GND
Black
Power supply -12V
5.Wiring Diagram
6.Packing List
Name
Model
Quantity
Remarks
RFID Reader
U-P001
1
User manual
U-P001
1
Rubber plug
2
Φ6mm×30 mm, used for fixing
Self tapping screws
2
Φ4mm×28 mm, used for fixing