Saeco Intelia Deluxe HD8906 User manual

Register your product and get support at
www.saeco.com/welcome
HD8906

English 5
Čeština 30
Deutsch 55
Español 81
Français 108
Magyar 135
Italiano 160
Nederlands 186
Polski 211
Português 236
Slovensky 261

ESP RES SO C APP UCCI NO
ESP RES SO LU NGO MIL K FR OTH
CA RAF E QUI CK CL EAN MEN U
A
R
O
M
A
S
T
R
E
N
G
T
H
S
P
E
C
I
A
L
D
R
I
N
K
S
1
2
29
30
4
13
14
15
16
28 27
17 18
21
22
20
19
23 24
26
25
3
8
9
6
5
10
11
7
12
1

English
Contents
Introduction 5
Important 6
Warning 6
Caution 6
Electromagnetic fields (EMF) 7
Machine overview (Fig. 1) 7
The display 8
First installation 8
Manual rinsing cycle 11
AquaClean filter 11
AquaClean filter installation 11
Replacing the AquaClean filter 12
Using the machine 13
Brewing coffee with beans 13
Adjusting the coffee quantity 13
Adjusting the grind setting 13
Cappuccino, baby cappuccino and milk froth 13
Brewing special drinks 14
Cleaning and maintenance 14
Weekly cleaning of the brew group 14
Lubrication 16
Milk carafe quick clean 17
Daily cleaning of the milk carafe 17
Weekly cleaning of the milk carafe 18
Monthly full milk carafe cleaning with milk circuit cleaner 19
Descaling 20
Descaling procedure 21
Interruption of the descaling cycle 22
Warning icons and error codes 22
Meaning of error codes 24
Ordering accessories Saeco 24
Guarantee and support 25
Recycling 25
Troubleshooting 25
Introduction
Congratulations on buying this Intelia/Intelia Deluxe full automatic espresso
machine! The machine is suitable for preparing espresso coffee using whole
coffee beans. You can use the milk carafe to prepare perfect cappuccino in
a quick and easy way.To fully benefit from the support that Saeco offers,
please register your product at www.saeco.com/welcome. This user manual
applies to all Intelia/Intelia Deluxe models with milk carafe.
5
English

Important
Warning
-Connect the machine to a wall socket with a voltage matching the
technical specifications of the machine.
-Connect the machine to an earthed wall socket.
-Do not let the power cord hang over the edge of a table or counter, or
touch hot surfaces.
-Never immerse the machine, mains plug or power cord in water (danger
of electrical shock).
-Do not pour liquids on the power cord connector.
-Never direct the hot water jet towards body parts: danger of burns.
-Do not touch hot surfaces. Use handles and knobs.
-Switch off the machine with the main switch located on the back and
remove the mains plug from the socket:
-If a malfunction occurs.
-If the machine will not be used for a long time.
-Before cleaning the machine.
-Pull on the plug, not on the power cord.
-Do not touch the mains plug with wet hands.
-Do not use the machine if the mains plug, the power cord or the machine
itself is damaged.
-Do not make any modifications to the machine or its power cord.
-Only have repairs carried out by a service center authorized by Philips to
avoid a hazard.
-The machine should not be used by children younger than 8 years old.
-This machine can be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the machine in a safe way and if they
understand the hazards involved.
-Cleaning and user maintenance shall not be made by children unless
they are older than 8 and supervised.
-Keep the machine and its cord out of the reach of children aged less than
8 years.
-Children should be supervised to ensure that they do not play with the
machine.
-Never insert fingers or other objects in the coffee grinder.
Caution
-This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments.
-Always put the machine on a flat and stable surface. Keep it in upright
position, also during transport.
-Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
6English

-Only put roasted coffee beans in the bean hopper. If ground coffee,
instant coffee, raw coffee beans or any other substance is put in the
coffee bean hopper, it may cause damage to the machine.
-Let the machine cool down before inserting or removing any parts. The
heating surfaces may retain residual heat after use.
-Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
-Never use souring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the machine. Simply use a soft cloth
dampened with water.
-Descale your machine regularly. The machine indicates when descaling is
needed. Not doing this will make your appliance stop working properly.
In this case repair is not covered under your guarantee.
-Do not keep the machine at temperatures below 0°C.Water left in the
heating system may freeze and cause damage.
-Do not leave water in the water tank when the machine is not used over
a long period of time. The water can be contaminated. Use fresh water
every time you use the machine.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Machine overview (Fig. 1)
1 Lid of the bean hopper
2 Coffee bean hopper
3 Socket for cord
4 Water tank
5 Pre-ground coffee compartment
6 Grinder adjustment knob
7 Control panel
8 Coffee grounds container
9 Coffee dispensing spout
10 Drip tray
11 Drip tray cover
12 Drip tray full indicator
13 ESPRESSO button
14 ESPRESSO LUNGO button
15 AROMA STRENGTH button
16 CARAFE QUICK CLEAN button
17 Standby button
18 MENU button
19 SPECIAL DRINKS button
20 MILK FROTH button
21 CAPPUCCINO button
22 Cord
23 Cleaning brush (for specific types only)
24 Grease (for specific types only)
25 Pre-ground coffee measuring spoon
26 Water hardness tester
27 Coffee residues drawer
7
English

28 Brew group
29 Milk carafe
30 Hot water dispensing spout
The display
Use these buttons to navigate through the menus:
ESPRESSO
-ESPRESSO button = ESC button: press this button to return to the main
menu. The ESC button takes you back one level. You may have to press
the ESC button several times to get back to the main menu.
A
R
O
M
A
S
T
R
E
N
G
T
H
-AROMA STRENGTH button = OK button: press this button to select,
confirm or stop a function.
CAPPUCCINO
-CAPPUCCINO button = UP button: press this button to scroll up through
the display menu.
S
P
E
C
I
A
L
D
R
I
N
K
S
-SPECIAL DRINKS button = DOWN button: press this button to scroll down
through the display menu.
First installation
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.
Like with most full-automatic machines, you first need to brew some coffees
to enable the machine to complete its self-adjustment and get the best
tasting coffee.
1Remove all packaging material from the machine.
2Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3Slide the drip tray with drip tray cover into the machine.
4Remove the water tank.
5Fill the water tank with fresh water to the MAX level indication.
8English

6Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
7Insert mains plug into a wall socket (1) and insert the small plug into the
socket located on the back of the machine (2).
8Place a container under the hot water and coffee dispensing spouts.
Check if the hot water dispensing spout is installed correctly.
9Press the standby button to switch on the machine.
10 Press the OK button to start the automatic circuit priming cycle.
11 The machine heats up and the display shows the temperature icon.
-The machine starts rinsing water through the coffee dispensing spout.
The display shows the rinsing icon and a progress bar.
AQUA
CL EA N
AQUACLEAN
FILTER?
12 The display shows the following icon to indicate you have to install the
AquaClean filter.
If you want to install the AquaClean filter afterwards, press the ESC
button and continue with the manual rinsing cycle. For installation, see
chapter ‘AquaClean filter’.
AQUA
CL EA N INSTALL
FILTER
13 Press the OK button. The display shows the following icon.
14 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
9
English

15 Immerse the AquaClean filter upside down in a jug with cold water and
wait until no more air bubbles come out.
16 Remove the water tank from the machine, empty it and insert the filter
vertically onto the filter connection.
17 Fill the water tank with fresh water to the MAX level indication.
18 Press the OK button.
A Q U A
CL EA N
0/8
ON
OFF
19 Select ON on the display and confirm the activation by pressing the OK
button
When activation is finished, the display shows a tick to confirm activation.
AQUA
CL EA N
100%
20The display shows the filter ready icon to indicate the AquaClean filter
has been installed correctly.
21 To rinse the filter, press the SPECIAL DRINKS button and select the HOT
WATER option and press the OK button twice. Water flows out from the
hot water dispensing spout. Discard this water.
It can take a while until water comes out of the hot water dispensing
spout. The filter needs to be fully filled and rinsed with water.
The machine is ready for use.
After installing the AquaClean filter, you do not have to perform the manual
rinsing cycle.
10 English