Saeco VIENNA PLUS User manual

OPERATING INSTRUCTIONS
MODE D’EMPLOI
INSTRUCCIONES DE USO
INSTRUCÇOES E MODO DE EMPREGO
TYPE SUP 018M
EnglishEspañolPortuguês
Services Unlimited, Inc./Parts Guru
Lansdale, PA 19446
Phone: [phone] Fax: [phone]
email: [email protected]

VIENNA
CAFE GRANDE
CAFE CREMA
VIENNA DIGITAL
Saeco
Service Unlimited, Inc./ Parts Guru
Lansdale, PA 19446
Phone: [phone] Fax: [phone]
emai: [email protected]
Edition 2003
Instructions are good for Spidem Trevi, Gaggia
Syncrony Logic and Solis M5000 models

Services Unlimited, Inc./ Parts Guru
email: [email protected]
Axor select Best Descaler, Coffee cleaner Liquid
and 30 Gm. Food grade lube is available from
Internet store www.shop.partsguru.com

Services Unlimited, Inc./ Parts Guru
email: [email protected]

1. INTRODUCTION VIENNA
5. Overview of product range
TYPE Pre-
brewing
Pre-
grinding
Rapid Steam Display
VIENNA x
CAFE GRANDE x
CAFE CREMA x x
VIENNA DIGITAL x x x
CAFE NOVA x x x x
Services Unlimited, Inc./ Parts Guru
email: [email protected]
Instructions are good also for Spidem Trevi
models, Gaggia Syncrony Logic and Solis
Master M5000

VIENNA DISASSEMBLY
1. Disassembly of the housing
a) Remove the water tank and the coffee bean container cover.
b) Remove the two fixing screws (1) of the coffee bean container.
Fig. 1
c) Remove the housing screw (1) under the water tank (Torx/T10).
d) Remove the housing screw (2) under the coffee bean container.
Fig. 2
1
1
2
Services Unlimited, Inc./ Parts Guru
email: [email protected]

DISASSEMBLY VIENNA
e) Remove the two bottom housing screws (1). Pull the housing left of the electronic
system slightly forwards and lift.
Fig. 3
f) Move the upper housing slightly to the left so that the notch (1) of the steam dial
is visible on the right side of the machine. Release the steam dial using a sharp
object and remove.
Fig. 4
g) Remove housing and pull water hose off.
1
1
Services Unlimited, Inc./ Parts Guru
email: [email protected]

VIENNA DISASSEMBLY
2. Disassembly of the base plate
a) Release the base plate from the underside of the machine using a screw driver (see
Fig. 5) and remove it from the housing.
Fig. 5
Services Unlimited, Inc./ Parts Guru
email: [email protected]

DISASSEMBLY VIENNA
7. Disassembling the grinder
a) Remove the two fixing screws (1). Remove the fixing screw on the upper grind
adjustment ring (2).
Fig. 18
b) Release the three fastening tabs (1) on the underside and remove the upper grind
adjustment ring (2).
Fig. 19
1
2
1
2
Services Unlimited, Inc./ Parts Guru
email: [email protected]

VIENNA DISASSEMBLY
c) Turn the grinding adjustment ring (1) clockwise until the three lugs of the
grinding disc fitting (2) are clearly visible and remove the upper grinding disc
from the grinder.
Fig. 20
d) Remove the fixing screw (1) of the grinding cone (note: left thread) and carefully
remove the grinding cone (friction clutch).
Fig. 21
1
2
1
Services Unlimited, Inc./ Parts Guru
email: [email protected]