Safavieh Furniture Basil FOX8200A User manual

CARE AND MAINTENANCE
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
*
Thi
s
it
em s
h
ou
ld
b
e assem
bl
e
d
on a so
ft
sur
f
ace
t
o preven
t
scra
t
c
hi
ng
th
e
fi
n
i
s
h
during assembly
* This item may require periodic tightening
Part List and Hardware List
Product Dimensions:
PIECE QUANTITY
A1X
DESCRIPTION PICTURE
Panel-1
B1X
C1X
Panel-2
Metal support rail
D2X
E2X
leg-1
H1 3X
H2 12X
H3
A
llen bolt L
Allen bolt S
Spring washer
H3
H4 15X
H5 1X
Spring
washer
Flat washer
Allen key
leg-2
Model# FOX8200A
55.11"Wx23.62"Dx21.65''H
12X
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
can discolor wood.
such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft
cotton cloth dampened with water or furniture polish. On highly used surfaces we recommend
wax which should
from scratches and spills. How often you apply the wax depends on how much wear the furniture
and rubber bases on it Plastic
Wipe up spills immediately and avoid common hazards
lint free
applying a quality paste be used on a regular basis to provide additional protection
receives.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
A
ttach leg-1 (D) to panel-2(B) using Allen bolt S(H2)
A
H2
H4
H3
H5
H1
H4 H2
H3
H4
ttach leg-1(D) leg-2 (E) to panel-1(A) using Allen bolt S
Spring washer (H3) and flat washaer (H4),Tighten
with allen key (H5)
(H2),Spring washer (H3) and flat washaer (H4),Tighten
with allen key (H5).
Attach Metal support rail (C) to panel-1(A) using Allen
bolt L (H1) flat washer (H4),Tighten with allen key (H5).
Step 1 Step 2
Stand table upright.Assembly is complete.
If any part is missing or damaged, do not attempt to assemble the product.