Safavieh Furniture Winchester NST1400 User manual

Item Id : NST1400
Product Dimensions : 26.77” W x 15.74” D x 23.62” H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or
softening of the lacquer. Plastic and rubber bases on items can
discolor wood. Wipe up spill immediately and avoid common hazards
such as hot dishes,harsh solvents and abrasives. Cleaning should be
done with a soft lint free cotton cloth dampened with water or furniture
polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide
additional protection from sratches and spills. How often you apply the
wax depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin
assembly this item.
* This item should be assembled on a soft surface to prevent scratching
the finish during assembly.
* This item may require periodic tightening.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
ABox Frame 1x
BLeg Frame 2x
HW 1 Jcbc Bolt M6x0.5x80mm 8x
HW 2 Barrel Nut 8x
HW 3 Plastic Washer 8x
HW 4 Allen Key 1x
HW 5 Silver Metal Knob 2x
HW 6 Truss Screw 2x Weight Capacity : 92 lbs

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 1 Step 2
1 2
Place the box upside down and screw both of the leg
frame to the cabinet box.
Turn the assembled cabinet upright and attach the knob
to the cabinet drawer.
HW 4
HW 1
HW 3
A
B
B
HW 2
x8
x8 **Take out the drawer first before
assemble the leg.
**Place back the drawer
after the leg is assembled.
HW 5
HW 6
x2