Safavieh Furniture Blanchard BCH8500A User manual

PIECE DESCRIPTION QUANTITY PIECE DESCRIPTION QUANTITY
A CHAIR BACK 1X HW1 ALLEN KEY M4 1X
B LEGS 4X HW2 JCBC BOLT M6 X 60MM 8X
HW3 SPRING WASHER M6 X 1/4 8X
HW4 FLAT WASHER 1/4 X 16 8X
PICTUREPICTURE
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
CAREANDMAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the furniture
wears.
PartListandHardwareList
ITEM ID: BCH8500A/B/C
PRODUCT DIMENSION: 52.55" W X 19.4" L X 31.2" H
Weight Capacity: 450LBS
WARNING: DO NOT STAND ON CHAIR

Complete.STEP 1: Attach Legs (B) to Chair Back (A) using Flat Washer (HW4), Spring Washer (HW3) and JCBC Bolt (HW2). Tighten JCBC Bolt (HW2)
with Allen Key (HW1). Repeat step 1 to assemble the other three legs (B).
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
HW1
HW4
HW3
HW2
B
B
BB
A