Safavieh Furniture Naios CNS9706 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents
list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber
bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,
harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water
or furniture polish. On highly used surfaces we recommend applying a quality paste wax which should be
used on a regular basis to provide additional protection from scratches and spills. How often you apply the
wax depends on how much wear the furniture receives.
PIECE DESCRIPTION PICTURE QUANTITY
ATable top 1x
BLeg 4x
HW1 Flat washer M6 8x
HW2 Allen Bolt M6x40mm 8x
HW3 Allen Key M5 1x
WARNING
Weight Capacity-70 LBS
Warning:Do not stand on Table
Warning:Do not over torque bolts
Model# CNS9706
Product Dimensions:47.25''Wx18.9''Dx29.9''H
Page 1 of 2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Step 1
Step 2
Upside down the table top on ground, attached legs to it
Screw all bolts by Allen Key
Page 2 of 2