Safavieh Furniture Esma MED9601 User manual

MED9601
58.6 W" 15.2 D" 18.6 H"
× ×
HW1x6
Ø 6 x 35 mm
HW6x24
HW2x6
Ø 15 mm
HW3x22 HW4x6 HW5x1
HW7x4 HW8x4 HW9x4 HW10x10
Ø 8 x 30 mm L 4
M 7 x 50 mm
M 4 x 16 mm
M 6.4 x 53 mm
M 6.5 x 12.5 mm
9 x 14 x 10 mm
HW11x10 HW12x4 HW13x4 HW15x10
HW16x3
HW21x4
M 3.5 x 15.5 mm
Ø 5 x 15 mm
Ø 8 mm
HW17x6 HW18x14 HW19x1 HW20x1
Ø 15 mm
HW14x4
A
B
C
D
E
F
F
G
G
HI
J
J
K
L
WARNING :
WEIGHT CAPACITY:
DO NOT STAND ON TV STAND
62 LBS.
25 x 25 mm
HW22x2 HW23x4 HW24x4
M 3.5 x 32 mm 5003

Part List & HW for Multi-Box Items
Piece
A HW1
HW2
HW3
HW4
HW5
HW6
HW7
HW8
HW9
Cambolt
CamLock
HW10
HW11
HW12
HW13
HW14
HW15
HW16
HW17
HW18
HW19
1 1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1
1
1
2
2
4
1
1
2
1
1
Top Board
Bottom Board
Side Board Left
Side Board Right
Support Leg 1
Support Leg 2
Leg
Center Board Left
Adjustable Shelf
Frame Door
Back Board
Center Board Right
B
C
D
E
F
G
H
I
J
K
L
Description Qty Carton Call Piece
6 1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
1 of 1
6
22
6
1
24
4
4
4
10
10
4
4
4
10
3
6
14
1
4
1
HW20
HW21
Description Qty Carton Call
Dowel
Screw M 7 x 50 mm
Screw M 4 x 16 mm
Spring Washer
Pin Sliding Top
Screw M 6.4 x 53 mm
Anti Deflection Bar
Screw Cap
Bumper
Screw M 6 x 12.5 mm
Pin Sliding Bottom
Allen Key
Shelf Pin
Nut
Wedge
Screw M 3.5 x 15.5 mm
Corner Brace
Wrench
Floor Protector
1 of 1
2
HW22 Tip Protector
1 of 1
4
HW23 Screw M 3.5 x 32 mm
1 of 1
4
HW24 Fisher

60
1
2
34
A
1
C
D
H
L
3
3
3
3
A
C
D
H
L
2
17
B
45
K
B
19 18
Insert Cambolt (HW1) into Top Board (A)
Insert Dowel (HW3) into Center Board ( H & L ),
Side Board Left ( C ) and Side Board Right (D)
Insert Backboard (K) as figure. Put Bottom Board (B)
and secure with Screw M7x50 (HW4),
tighten screws using Allen Key (HW5)
Attach Side Board Left (C) , Side Board Right (D),
Center Boards ( H& L ) into Top Board (A) .
Insert Camlock (HW2) then tighten using screwdriver.
Put Screw Cover (HW17) over the camlock.
Place Anti Deflection Metal Bar (HW19) ,
secure with screw M6.5x12,5 (HW18) using screwdriver.

56
78
F
6
7
E
F
F
6
E
E
6
3
E
± 2 mm
± 2 mm
± 2 mm
Do not �ghten screw yet
Do not �ghten screw yet
Do not �ghten screw yet
Now let’s combine the bottom skirt. Start with installing Corner Brace (HW7)
into Bottom Skirt 2 (F) using Screw M4x16 (HW6). Do not overtight screw yet,
leave around 2mm gap.
Combine components from step 7 with remaining Bottom skirt 1 (E),
using Screw M4x16 (HW6). Do not overtight screw yet, leave around 2mm gap.
Combine the Bottom Skirt 2 from step 6 with Bottom skirt 1 (E),
using Screw M4x16 (HW6). Do not overtight screw yet, leave around 2mm gap.
Insert Dowel (HW3) into assembled bottom skirt.

910
11 12
I
12 JJ
13
14
16
13
14
5
15
21
G
G
G
G
E
9
820
1Fixing The Legs
2
Tighten all screws
on corner bracket
Bring the assembled bottom skirt and insert into Bottom Board of the cabinet.
Secure with Screw M6.4 x 53 using Allen Key (HW5)
After bringing the product upright, insert Shelf Pin (HW12) into the between
Centerboards on the desired level. Then place the Adjustable Shelf (I) onto the Shelf Pin.
Peel the back paper of Bumper ( HW16) then place on
both frame door,position as shown in the figure.
Insert Top Pin Sliding (HW13) and Bottom Pin Sliding (HW14)
on both end of frame door as specified position in the figure.
Remove plastic cap from Legs. Insert the bolt of the Leg (G)
into hole of corner brace as shown in figure. Insert Spring Washer (HW8)
first into the hanger bolt of leg, then followed by Nut (HW9),
tighten all the nuts using provided Wrench (HW20).
Ensure that all legs has been tightened, then continue with tightened
all screws on the corner brace.

13
15
16
14
Hold the frame door with position of the upper pin shown in
facing upward. Put the frame door by inserting it to the upper groove
on Top Board (1), then place the lower part aligned into the groove
on bottom board (2).
Repeat this step for the other door. Slide the doors to right and left ensuring
the doors has been placed properly in the provided track.
The unit needs to be secured against wall using tip anti tip kit.
Please Consult your local hardware store to get advice of appropriate screw and fischer
according to your wall type. Drill pre-holes on wall as shown in fig(2) for the tip protector.
Repeat the step with same distance of both tip protector attached in step 15.
Insert fischer to each hole on the wall using hammer.
Secure the Tip Protector (HW22) using Screw M3.5x32mm (HW23).
Make a loop by inserting the provided Fastener / Cable ties into both tip protector on wall
and on backside of product, with the grids surface facing inside of loop.
Fasten the cable ties until position of product as close as possible to wall.
Repeat on the other side.
11
10
Use Wedge (HW10), Screw M 3.5 x15.5 (HW11)
to tighten the back of media stand by using screwdriver.
11
11
X
11 22
Attach Tip Protector (HW22) into back of Top Board using Screw M3.5x15.5.
24
22
23
Grids Surface