Safavieh Furniture CHS9002A User manual

NOTICE
PREPARATION
* Please make sure that you have all parts indicated they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a soft surface to prevent scartching the finish during
assemby.
* This item may require periodic tightening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [email protected]
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
*Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
*The use of steam or water-based cleaners may cause excessive shrinking or staining.
PIECE DESCRIPTION PICTURE QUANTITY
Item: CHS9002A
Product dimensions:
32.69"W* 17.69"D*33.39"H
ACabinet 1X
Hw1
Hw3
Hw4
Allen bolt 16x6 mm
Allen key 4 mm
Pen Head
bolt 10x6 mm
6X
1X
4X
BLeg 2X
WARNING
Weight Capacity - 175 LBS
Warning : Do not stand on Chest
Warning : Do not over torque bolts.
Hw2 Flat washer 16x8 mm 6X
CStretcher 2X
The legs and hardware are located under the drawer
Item# CHS9002A
Product dimensions: 32.69"L* 17.69"W*33.39"D
WARNING
Weight Capacity - 175 LBS
Warning : Do not stand on Chest
Warning : Do not over torque bolts.
NOTICE
* Please make sure that you have all parts indicated and are in good condion before you begin assembly
of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [e-mail]
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
*Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
*The use of steam or water-based cleaners may cause excessive shrinking or staining.
PREPARATION
contents list and hardware contents list.
Part List and Hardware List
Hw3 Allen key 4 mm
1X
2X
Flat washer 16 x 8 mm
Allen bolt 6 X 1 X 16 mm
A
C
Hw1
Hw2
Cabinet
Stretcher
24X
24X
1X
PIECE DESCRIPTION PICTURE QUANTITY
BLeg 2X
Hw4 Allen key 4 mm 4X

PREPARATION
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
4x
STEP 1 :- ALIGN LEG WIH LEG (B) STRETCHER (C) AS SHOWN. STEP 2 :- INSERT ALLEN BOLT (HW4) AND TIGHTEN WITH ALLEN KEY (HW3) AS SHOWN.
Hw4
B
STEP 1 :- STEP 2 :-
C
Hw3
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
STEP2
Align leg (B) with the stretcher (C).
STEP3
Put the washer on the Bolt in the order shown in
picture.
STEP4
Insert Allen Bolt (Hw4) ghten with allen key (Hw3)
Don’t over ghten.
Hw2 Hw1
Hw2
Hw1
Hw3
STEP5
Now align complete leg assembly (B+C) with
STEP6
Put the washer on the Bolt in the order shown in
picture.
Hw2 Hw1
Hw2
Hw1
Hw3
C
B
C
B
Hw4
Hw3
C
B
B
A
C
cabinet (A) as shown.

PREPARATION
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
STEP 3 :- NOW ALIGN THE LEG ASSAMBLY WITH CABINET (A) AS SHOWN. STEP 4 :- INSERT ALLEN BOLT(HW1) WITH WASHER(HW2) AND TIGHTEN WITH ALLEN KEY(HW3) AS
SHOWN.
STEP 3 :- STEP 4 :-
A
6x
Hw1
Hw2
Hw3
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Hw3
Hw1
Hw3
STEP 5 :-FLIOP THE CABINET UPRIGHT WITH HELP
.
STEP 5 :-
PREPARATION
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
STEP7
Insert Allen Bolt (Hw1) ghten with allen key (Hw3)
Don’t over ghten.
STEP8
flip the chest upright with help.