Safavieh Furniture Faris HBD6500A-F User manual

HBD6500A-F
61.02” x 13.77” X 47.24”
NOTICE
PREPARATION
Weight Capacity - 220 LBS
Warning : Do not stand on Headboard
Warning : Do not over torque bolts.
WARNING
CARE AND MAINTENANCE
Part List and Hardware List
NO.
1
2Anchor Plug
Headboard
DESCRIPTION PICTURE QTY
3Screw
1
2
2
60 mm
9 mm
5 mm
38 mm
7 mm
Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during
assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
Do not expose your furniture to any liquids. All liquids should be wiped up immediately with a so,
slightly damp cloth in the direcon of the raan. Do not expose your furniture to strong or direct
sunlight, heat outlets, open windows and dampness. Excessive exposure to sunlight can cause fading
of your furniture finish. Extreme temperatures and humidity changes can cause cracking and spling.

Option 1:
Anchor Plug on Wall
Option 2:
Anchor Plug
on Bed Frame
PREPARATION
OPTION 1 : PLACE THE "HEADBOARD" NEAR THE WALL, THEN PLACE THE
"ANCHOR PLUG" BEHIND THE "HEADBOARD" & PLACE THE "SCREW"IN
FRONT OF IT.THEN DO THE DRILLING LIKE IN THE PICTURE & DONE.
OPTION 2 : PLACE THE "HEADBOARD" NEAR THE BED FRAME, THEN PLACE
THE "ANCHOR PLUG" BEHIND THE "HEADBOARD" & PLACE THE "SCREW"
IN FRONT OF IT. THEN DO THE DRILLING LIKE IN THE PICTURE & DONE.
RESULT : YOUR HEADBOARD IS READY.
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]

HBD6500A-Q
72.83” x 13.77” X 47.24”
NOTICE
PREPARATION
Weight Capacity - 220 LBS
Warning : Do not stand on Headboard
Warning : Do not over torque bolts.
WARNING
CARE AND MAINTENANCE
Part List and Hardware List
NO.
1
2Anchor Plug
Headboard
DESCRIPTION PICTURE QTY
3Screw
1
2
2
60 mm
9 mm
5 mm
38 mm
7 mm
Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during
assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
Do not expose your furniture to any liquids. All liquids should be wiped up immediately with a so,
slightly damp cloth in the direcon of the raan. Do not expose your furniture to strong or direct
sunlight, heat outlets, open windows and dampness. Excessive exposure to sunlight can cause fading
of your furniture finish. Extreme temperatures and humidity changes can cause cracking and spling.

Option 1:
Anchor Plug on Wall
Option 2:
Anchor Plug
on Bed Frame
PREPARATION
OPTION 1 : PLACE THE "HEADBOARD" NEAR THE WALL, THEN PLACE THE
"ANCHOR PLUG" BEHIND THE "HEADBOARD" & PLACE THE "SCREW"IN
FRONT OF IT.THEN DO THE DRILLING LIKE IN THE PICTURE & DONE.
OPTION 2 : PLACE THE "HEADBOARD" NEAR THE BED FRAME, THEN PLACE
THE "ANCHOR PLUG" BEHIND THE "HEADBOARD" & PLACE THE "SCREW"
IN FRONT OF IT. THEN DO THE DRILLING LIKE IN THE PICTURE & DONE.
RESULT : YOUR HEADBOARD IS READY.
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]