Safavieh Furniture Kerensa BED8000A-F User manual

PIECE QUANTITY
A 1X
B 2X
C 4X
D 4X
E 4X
F 4X
G 4X
H 4X
I 1X
J 2X
K 1X
L 2X
M 2X
N 4X
O 1X
WRENCH
SLATS
SUPPORT LEGS
SCREW 6X1 1/4
ALLEN KEY
SIDERAIL
FOOTBOARD
BOLT 8X60
WASHER M8
RING M8
BOLT 8X 0
WASHER M8
RING M8
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Product Dimensions : 56"W x 84"D
x 47"H
Model # BED8000A-F
Part List and Hardware List
WOODEN LEG
DESCRIPTION PICTURE
HEADBOARD

Step 1
Step 2
Attach 2 siderails to the headboard (A) assembled with wooden legs (B) and the
footboard (I)
Tightened the bolts in wooden legs using Allen Key.
Tightened the bolts in footboard corners using wrench.
Step 3
Attach 1 support legs ( ) to each slats (M).
Attach slats to the siderails support.
4 rings. Others 4 bolts, and rings are attached on the legs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
The hardware needed to connect the legs (B) to the headboard (A) are
bolt (C), and ring (D)
Attach the two legs (B) to the headboard (A) using 4 bolts (C ), and
H
C
D
F
A
B
J K
L M
N
N
E
G

PIECE QUANTITY
A 1X
B 2X
C 4X
D 4X
E 4X
F 4X
G 4X
H 4X
I 1X
J 2X
K 1X
L 2X
M 2X
N 4X
O 1X
Product Dimen ion : 63"W x 84"D
x 47"H
SCREW 6X1 1/4
SUPPORT LEGS
FOOTBOARD
SLATS
ALLEN KEY
RING M8
SIDERAIL
BOLT 8X60
RING M8
WASHER M8
WASHER M8
WRENCH
Part List and Hardware List
CARE AND MAINTENANCE
Alway u e felt pad under all article to prevent di coloration or oftening of the
lacquer. Pla tic and rubber ba e on item can di color wood. Wipe up pill
immediately and avoid common hazard uch a hot di he , har h olvent and
abra ive . Cleaning hould be done with a oft lint free cotton cloth dampened with
water or furniture poli h. On highly u ed urface we recommend applying a quality
pa te wax which hould be u ed on a regular ba i to provide additional protection
from ratche and pill . How often you apply the wax depend on how much wear the
furniture receive .
NOTICE
* Plea e make ure that you have all part indicated before you begin a embly of thi
item
* Thi item hould be a embled on a oft urface to prevent cratching the fini h
during a embly
* Thi item may require periodic tightening
Model # BED8000A-Q
DESCRIPTION PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X30

Step 1
Step 2
Attach 2 siderails to the headboard (A) assembled with wooden legs (B) and the
footboard (I)
Tightened the bolts in wooden legs using Allen Key.
Tightened the bolts in footboard corners using wrench.
Step 3
Attach 1 support legs ( ) to each slats (M).
Attach slats to the siderails support.
The hardware needed to connect the legs (B) to the headboard (A) are
bolt (C), and ring (D)
Attach the two legs (B) to the headboard (A) using 4 bolts (C ), and
4 rings. Others 4 bolts, and rings are attached on the legs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
H
C
D
F
A
B
J K
L M
N
N
E
G