Safavieh Furniture Kaera COF7011 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Glass top
1x
B
Leg board
1x
C
Leg board
1x
HW1
Allen key
1x
NOTICE
*Please make sure that you haveall parts indicated and they arein goodconditionbeforeyou begin assemblyof
thisitem.Referto partlistandhardwarelist below forguidance.
*Thisitem should be assembledon asoftsurface to prevent scratching the finish during assembly.
*Thisitem mayrequireperiodictightening.
*If you arehavingdifficulty,ourfriendlyCustomer Careteamis always here to help.Pleaseemail
[e-mail]
PREPARATION
*Beforebeginningassemblyof product, makesureallparts arepresent.Compareparts withpackagecontentslist
andhardwarecontentslist.
*Ifanypartis missingor damaged,do notattemptto assemblethe product.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included):AllenKey
CARE AND MAINTENANCE
Alwaysuse felt pads underallarticles to preventdiscolorationor softening of thelacquer.Plasticandrubber bases
on items can discolorwood.Wipeup spills immediately and avoid commonhazards such as hotdishes, harsh
solvents andabrasives.Cleaning should be donewitha softlintfreecottonclothdampenedwihtwateror furniture
polish.
On highly used surfaceswe recommendapplyingaquality pastewaxwhich shouldbe usedon aregularbasisto
provide additional protection fromscratches and spills. Howoften you applythewaxdependson howmuchwear
the furniturereceives.
Weight Capacity : 110 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # COF7011
Product Dimension: DIA31.5Wx16.5H”
Part List and Hardware List

Step 1: Cross the Leg board(B) and (C)
together.
Step 2: Put the Glass Top(A) onto the leg boards carefully,
make the aluminum plates align to the plates on the Leg
boards.
Step 3: Tighten the Jackscrew by using Allen Key(HW1).
PREPARATION
*Beforebeginningassemblyof product,make sure all parts arepresent.Compare parts with package contents listand hardware contents list.
*Ifanypartis missingor damaged,do notattemptto assemblethe product.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included):AllenKey
*If you arehavingdifficulty, ourfriendly Customer Careteamis always here to help.Pleaseemail [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’