Safavieh Furniture Lucilia BCH8501A User manual

PIECE DESCRIPTION QUANTITY PIECE DESCRIPTION QUANTITY
A BACK FRAME 1X HW1 JCBC SCREW M6 X 35MM 12X
B LEFT LEG FRAME 1X HW2 FLAT WASHER 1/4 X 16 2X
CRIGHT LEG FRAME 1X HW3 ALLEN KEY M4 1X
D CROSSBAR 2X HW4 WOOD SCREW M5 X 30MM 6X
E CHAIR SEAT 1X HW5 SPRING WASHER M6 X 1/4 2X
F LEFT ARM 1X HW6 GLUE 1X
G RIGHT ARM 1X HW7 FOOT PAD 4X
PICTUREPICTURE
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
CAREANDMAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the furniture
wears.
PartListandHardwareList
ITEM ID: BCH8501A/B/C
PRODUCT DIMENSION: 46.7" W X 19" L X 35.2" H
Weight Capacity: 450LBS
WARNING: DO NOT STAND ON CHAIR

STEP 3: Attach the Left Arm (F) & Right Arm (G) into the Chair
Seat (E) and the Back Frame (A).
STEP 6: Install Crossbar (D) into holes on Left Leg Frame (B)
and Right Leg Frame (C). Paste the Foot Pad (HW7) to the legs.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1: Attach the Back Frame (A) to the Chair Seat (E). Secure
it using JCBC Bolt (HW1) with Allen Key (HW3). DO NOT
TIGHTEN COMPLETELY AT THIS TIME
STEP 2: Put the Glue (HW6) into the arm hole.
STEP 4: Secure it using JCBC Bolt (HW1) From side post. STEP 5: Using Wood Screw (HW4), Spring Washer (HW5) and Flat
Washer (HW2) from the bottom of chair seat. Tighten all screws and
bolts from step 1 to step 5 at this time. Do not over tighten and do not
use power tools.
HW7
HW7
D
B
C
HW3
HW1
E
AHW6 HW6
HW1
HW4
HW5
HW2

Complete.STEP 7: Front legs with RED MARK must facing front. Position
the frame assembly into the bottom of Chair Seat. Align and
tighten bolt into Chair Seat and frame using JCBC Bolt (HW1)
with Allen Key (HW3).
STEP 8: Front legs with RED MARK must facing front. Assembly
Crossbar (D), Left Leg Frame and Right Leg Frame using Wood
Screw(HW4).
RED MARK
RED MARK HW4
HW3
HW1