Safavieh Furniture FOX8515 User manual

Model# FOX8515
Product Dimensions: 26.8"W*24.2"D*45.1~48"H
PIECE QUANTITY
(1) 1X
(2) 1X
(3)
1X(R,L)
(4)
1X
(5)
1X
(6)
1X
(7)
5X
(8)
7X
(9)
2X
(10)
7X
(11)
2X
Washer
Allen Wrench
Caster
Medium Screw
Short Screw
CARE AND MAINTENANCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.
Test the cleaning method on a hidden area before using them over the entire area .
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Star Base
Control Mechanism
Cylinder Column
Part List and Hardware List
Seat Cushion
DESCRIPTION
PICTURE
Headrest
Back Cushion

Step 1 Step 2 Step 3
Step 5 Step 6
Now insert the small end of Cylinder Column (5) into
Control Mechanism (4) and carefully press downward
with moderate force until it is fully seated.
Assemble the Seat(3) to the Back(2)
together,using three Short Screws(8) and
three Washers(10).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS
ARE FULLY TIGHTENED BEFORE USING
CHAIR
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Step 4
PREPARATION
Insert five Casters (7) into Star Base (6),
push hard until you feel or hear the
Caster(7) snap into place. Insert the
LARGE end of Cylinder Column (5) into
the Star Base (6) and carefully press
downward with moderate force until it is
fully seated.
Attach Control Mechanism (4) to
Seat Assembly (3) with the arrow
towards the front of the chair, using
four Washers (10) and four Short
Screws(8).
Connect the Headrest(1) to Back(2) by
using two Medium Screws(9).