Safavieh Furniture Quai BST1404 User manual

Item Id : BST1404
Product Dimensions : 16.73” W x 16.92” D x 39.76” H
Weight capacity - 236 LBS
Warning : Do not stand on chair.
Warning : Do not over torque bolts.
NOTICE
* Please make sure that you have all parts indicated and they are in good
hardware list below for guidance.
the finish during assembly.
* If you are having difficulty, our friendly Customer Care team is always
here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
product
30 minutes.
* Tools required for assembly (included) : Allen key
CARE AND MAINTENANCE
spill immediately and avoid common hazards such as hot dishes, harsh
cloth dampened with water or furniture polish.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
ASeat Frame 1x
B Leg Frame 2x
CStretcher (Short) 2x
D Stretcher (Long) 2x
E Plate Panel 1x
HW 1 Jcbc Bolt M6x0.5x20mm 8x
HW 2 Flat Washer 8x
HW 3 Spring Washer 8x
HW 4 Swivel Plate 1x
HW 5 JcbcW Bolt M7x3.0x40mm 12x
HW 6 Allen key (Long) 1x
HW 7 8x

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated assembly me : 30 minutes
* Tools required for assembly (included) : Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 1 : Screw both le and right leg to the
stretchers (long and short).
Step 2 : Place the swivel plate to the plate
panel and ghten it with the bolts.
Step 3 : Screw the pre-assembled plate panel
(step 2) with the seat frame. Turn around the
plate panel to posion the screw into places.

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated assembly me : 30 minutes
* Tools required for assembly (included) : Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 4 : Place the assembled leg (step 1) to the seat frame (step 3).
Screw it with the bolts.
Step 5 : Upright the chair and place the wood buon to cover the screw
hole.