Safavieh Furniture KCH1400 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good
hardware list below for guidance.
the finish during assembly.
* If you are having difficulty, our friendly Customer Care team is always
here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
15 minutes
* Tools required for assembly (included) : Allen key
* Tools required for assembly (not included) : Philip screw driver
CARE AND MAINTENANCE
Item Id : KCH1400
Product Dimensions : 19.68” W x 11.81” D x 32.67” H
Weight capacity - 92 LBS
Warning : Do not stand on table.
Warning : Do not over torque bolts.
Always use felt pads under all arcles to prevent discoloraon or soening of
the lacquer. Plasc and rubber bases on items can discolor wood. Wipe up
spill immediately and avoid common hazards such as hot dishes, harsh solvents
and abrasives. Cleaning should be done with a so lint free coon cloth
dampened with water or furniture polish. On highly used surface we
recommend applying a quality paste wax which should be used on a regular
basis to provide addional protecon from scratches and spills. How oen
you apply the wax depends on how much wear the furniture receives.

PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A1x
B2x
C2x
D4x
E2x
HW 1 12x
HW 2 4x
HW 3 12x
HW 4 1x
HW 5 2x
HW 6 2x
Table Top
Side Panel
Support Brace 1
Support Brace 2
Shelf
Barrel Nut
Jcbc Bolt M6x1.0x60mm
Allen key
Screw M4x2.0x30mm
Castor Wheel
Castor Wheel With Lock

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
uct.
* Tools required for assembly (included) : Allen key
* Tools required for assembly (not included) : Philip screw driver
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
HW 2
A
C
C
HW 3
HW 1
D
D
B
Step 1 : Insert both of the support brace 1 (C) to the table top (A)
and screw in the bolts (HW2) using a screw driver.
Step 2 : Place the side panel (B) to the table top (step 1). Place the barrel
nut (HW3) to the first hole of the support brace 1. Screw the side panel
to the support brace 1 using the bolts (HW1). Repeat the same for
support brace 2.

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
uct.
* Tools required for assembly (included) : Allen key
* Tools required for assembly (not included) : Philip screw driver
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 3 : Slide the shelf (E) into the grooves of support brace 2 and
assemble another piece of the side panel. Follow the same step in step 2.
Step 4 : Push castor wheels (HW5, HW6) into the holes at the bottom
of the side panels (B).
E
E
HW 3
HW 1
B
E
HW 6
HW 5HW 6
HW 5