Safavieh Furniture SEA8027A-Q User manual

PIECE QUANTITY
A1X
B2X
C12X
D12X
E
12X
WASHER
RING
DESCRIPTION
PICTURE
HEADBOARD
WOODEN LEG
BOLT
Product Dimensions : 65.3"W x 3" D x 53" H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # SEA8027A-Q
Part List and Hardware List

Step 1 Step 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
The hardware needed to connect the legs (B) to the headboard
(A) are bolt (C), washer (D) and ring (E)
Attach the two legs (B) to the headboard (A) using 6 bolts
(C ), 6 washers and 6 rings.
Others 6 bolts, washers and rings are attached on the
legs.
A
B
C+D+EC+D+E
C
D
E