Safavieh Furniture SFV5302A User manual

Part List and Hardware List
C O U T U R E
SFV5302A
DIMENSIONS: 52“L x 18“D x 34“H
PIECE DESCRIPTION PICTURE QUANTITY
A 6 Drawer Wood Dresser 1x
HW1 Metal Leg 4x
HW2 Allen Bolt: M6 x 1 x 20 mm 16x
HW3 Split Lock Washer: M6 16x
HW4 Allen Key 1x
Weight Capacity - 300 LBS
Warning : Do not stand on Chest
Warning : Do not over torque bolts
* Please make sure that you have all parts indicated and they are in good condion before you
NOTICE
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a sosurface to prevent scratching the nish during
assembly.
* This item may require periodic ghtening.
* If you are having diculty, our friendly Customer Care team is always here to help. Please
email customer[email protected]
* Before beginning assembly of product, make sure all parts are present. Compare parts with
PREPARATION
part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 15 minutes.
* This item may require periodic ghtening.
* Tools Required for Assembly (included): Allen Key
Always use felt pads under all arcles to prevent discoloraon or soening of the lacquer.
CARE AND MAINTENANCE
Plasc and rubber bases on items can discolor wood. Wipe up spills immediately and
avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should
be done with a solint free coon cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide addional protecon from sratches and spills. How oen you apply
the wax depend on how much wear the furniture receives.
WARNING
! !

Step 1: Take all package othe dresser. Aach the Metal Legs (HW1) to underneath of the dresser,
using Allen Key (HW4) to lock with Allen Bolt (HW2) and Split Lock Washer (HW3).
12
Step 2: Turn the dresser up to
front side, adjust the metal legs to
make it stable.
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
PREPARATION
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 15 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having diculty, our friendly Customer Care team is always here to help. Please email customer[email protected]
X16
HW1
A
A
HW1
HW1
HW1
HW1
HW3 HW2
HW4