Safavieh Furniture Taft NST9012A User manual

NOTICE
PREPARATION
* Please make sure that you have all parts indicated they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a soft surface to prevent scartching the finish during
assemby.
* This item may require periodic tightening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [email protected]
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
*Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
The legs and hardware are located under the drawer
Allen key 4 mm
1X
2X
Flat washer 25 mm
Allen bolt 30x6 mm
A
B
Cabinet
Leg
6X
6X
1X
PIECE QUANTITY
DESCRIPTION PICTURE
Item# NST9012A
Product dimensions: 19.7"L* 15.7"W*19.7"D
WARNING
Weight Capacity - 66 LBS
Warning : Do not stand on Bed side
Warning : Do not over torque bolts.
Hw3
Hw1
Hw2
Item# NST9012A
Product dimensions: 19.7"L* 15.7"W*19.7"D
WARNING
Weight Capacity - 66 LBS
Warning : Do not stand on Bedside
Warning : Do not over torque bolts.
NOTICE
* Please make sure that you have all parts indicated and are in good condion before you begin assembly
of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [e-mail]
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
*Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
*The use of steam or water-based cleaners may cause excessive shrinking or staining.
PREPARATION
contents list and hardware contents list.
Part List and Hardware List
Hw3 Allen key 4 mm
1X
2X
Flat washer 25 x 8 mm
Allen bolt 6 X 1 X 30 mm
A
B
Hw1
Hw2
Cabinet
Leg
6X
6X
1X
PIECE DESCRIPTION PICTURE QUANTITY

PREPARATION
* Before beginning assembly of product , make sure all parts are presnt . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the pdoduct.
* Estimated Assembly time : 10 minutes
* Tools Required for Assembly (included): Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
The legs and hardware are located under the drawer
STEP2 PUT THE WASHERS (H2) ON THE ALLEN
BOLT (H1) IN THE ORDER SHOWN IN THE
PICTURE
STEP3 INSERT ALLEN BOLT WITH WASHER INTO
THE BOTTOM PANEL HOLE AS SHOWN AND
TIGHTEN WITH ALLEN KEY(H3).
STEP1 OPEN THE ZIPPER ON THE INSIDE OF THE
DRAWER AND TAKE OUT LEGS AND HARDWARE
6x
Hw3
Hw1
Hw2
A
B
B
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
A
B
STEP2
Place the Bedside upside down on a clean surface.
Align legs on both sides of Bedside unit as per side holes
present on either side of Bedside.
STEP3
Put the washer on the Bolt in the order shown in
picture.
STEP4
Insert Allen Bolt (Hw1) with Washer (Hw2)
ghten with Allen Key (Hw3).Don’t over ghten.
Hw2 Hw1
Hw2
Hw1
Hw3
STEP5
Repeat step 4 for, other side leg, flip the Bedside upright with help.
B
Hw2 Hw1 Hw3