Safavieh Furniture Malone FOX4257 User manual

Model# FOX4257
Product Dimensions:Ø35-2/5"WX13-4/5"H
PIECE QUANTITY
A
1X
B
1X
C1X
D3X
E1X
F1X
H1 11X
H2 1X
H3 4X
H4 3X
Rubber pad
Rubber pad
Leg-5
23-3/5"
Allen bolt
M6X40mm
Allen key
Leg-2
18-1/2"
Leg-3
13"
Leg-4
21-1/2"
DESCRIPTION
PICTURE
Top
Leg-1
21-1/2"
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List

Step 1 Step 2 Step 3
Attach B to A,using arren bolt (H1),tighten with Attach C to A,using arren bolt (H1),tighten with Attach D to B,using arren bolt (H1),tighten with
arren key(H2) arren key(H2) arren key(H2)
Step 4 Step 5 Step 6
Attach D to C,using arren bolt (H1),tighten with Attach E to D,using arren bolt (H1),tighten with Attach F to D & E,using arren bolt (H1),tighten
arren key(H2) arren key(H2) with arren key(H2)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1
2
3
4
5
6
8
9
7

Step 7 Step 8 Step 9
Attach D to F & B,using arren bolt (H1),tighten Cover the holes with rupper pads(H3) Put the rubber pads(H4) to the bottom of legs
with arren key(H2)
8
9
7