Safavieh Outdoor San Salvador CPT1020 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
Frame back
Frame Seat
Allen key
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# CPT1020
Product Dimensions:25" W x 25" D x 40.06" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
E
chair
Bolt
F
Washer
M8x85
M6x50
M8x60
LG4
M8.5/20X20
M4x45
1X
1X
2X
1X
4X
2X
4X
2X
10X
PIECE DESCRIPTION PICTURE QUANTITY
1X
1X
G
Frame Leg 1
Frame Leg 2
Cushion seat
M8x40
1X
Bolt
Bolt
Bolt
Screws 6X
I
K
L
M
N
o
P
QNot Provied
Side Rail
legconnection

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (A) to Frame Table (B) ,use Bolt (I) and Washer (N),
tighten with allen key (P).
Step 2
P
P
I
NA
B
P
L
N
1
2
Use .Bolt (L) and Wassher (N), tighten with allen key (P).

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3 Step 4
N
K
P
D
E
MN
K
PM
F
C
E
Attach leg (D) to Frame Seat (B) ,use Bolt (K) and Washer (N),
tighten with allen key (P).
Then, place (E) into the housing of the Hind leg of the
Chair Back(A) and Front Leg (D)
Attach Front Leg (D) and Chair back (A) use Bolt( M) tighten with
allen key (P)
Attach leg (C) to Frame Seat (B) ,use Bolt (K) and Washer (N),
tighten with allen key (P).
Then, place Side Rail (E) into the housing of the Hind leg of the
Chair Back(A) and Front Leg (C)
Allach leg connection (F) into the housing of the Front legs(C),(D)
Attach Front Leg (C) and Chair back (A) use Bolt( M) tighten with
allen key (P)

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
56
Step 5 Step 6
Attach cushion in chair and Complete.
O
Q
G
Secure the Leg Connection(F) to Front Legs (C),(D) and Side Rail (E)
to Chair Back(A) and Front Leg (C) by using Screw(O) and Screwdriver(Q).