Safavieh LIT4355A User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A.B.C
nut.mat.washer 1X D Base 1X
E steel plate 1X P Shade 1X
Z Wrench key 1X Q RING 1X
G.H.I.M.
L.K.N.Y.
X
Lamp base 1X R Bulb 1X
JSCREW 1X T Finial 3X
Model# LIT4355A
Product Dimensions:
L62 " X W18" X H85-3/4"
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

2. Stand the assembled base onto a flat surface
3. Insert tube (H) into tube(G)
4. Insert tube (I) into tube(H)
5. Insert Arm (M) into tube(I) and secure with thumb screw(J)
6. Insert arm (N) into arm(M)
7. Insert arm (Y) into arm(N)
8. Insert metal (X) into arm(Y) and secure with screw(W)
9. Put shade(P) onto socket(O) and secure it with socket ring(Q),
insert 23W CFL bulb(R)-(INCLUDED)
10. Put PS panel(S) onto the shade(P) and secure it with Finial(T)
11.Insert arm(L) into arm(M).
12.Inset wood(K) into arm(L).
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
1. Insert tube(G) to the base(D) and steel plate(E), then secure by
flat washer(C).plat mat(B) and hex nut (A) using wrench key(Z)-INCLUDED