Light Emitting Designs IL3525 Series User manual

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
IL3525 Series
CH4 - Four Link Chain Chandelier Mounting System
LED Industrial Lighting
• One IL3525 LED Industrial Light with CH4 pre-mount
• One (CH4) Four Link Chain Chandelier Mounting Bracket
• Four chains with double sided clips
• Four sets of anchoring kit for concrete surfaces
• One standard wire fitting for junction-box knockout hole
• Installation manual
FEATURES AND APPLICATIONS
• L70 Rating @ Ta 25°C Over 150,000 hour rated life
• Low - Mid Bay applications
• Available in Type II, V Square
• 10-Year Limited Warranty
• IP68 - waterproof rated fixture
• Indoor / outdoor applications
• Low profile industrial grade design
• Easy to install with versatile mounting system
• Food Processing Plants
• Billboards
• Warehouses
• Parking Structures
• Canopy Lighting
• Tunnels
• Mining
• Refineries & Petrochemical Plants
ITEMS INCLUDED FOR INSTALLATION
01

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
IL3525 Series
CH4 - Four Link Chain Chandelier Mounting System
LED Industrial Lighting
External Dimensions
900mm
36"
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician
and / or qualified personnel.
• Make sure to Slide OFF the main power from the circuit
breaker or fuse box before installing, servicing or
inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Packaging Information
Case Quantity Dimensions (LxWxH) Weight
1
83mm
3
¼ "
450mm
18"
CH4-IL3525-45C CH4-IL3525-90C
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and/or CE approved wires for all input connections,
minimum size required 18 AWG(0.82mm²)
• Do not use this product in environments where the
temperatures could exceed 50°C (122°F)
38.5 x 28.5 x 16.5 cm
15⅛ x 11¼ x 6½ in
5.7 kg
12.5 Ibs
02

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
IL3525 Series
CH4 - Four Link Chain Chandelier Mounting System
LED Industrial Lighting
1.
2.
• Handle fixture with care while unpacking
the unit from its packaging and carefully
examine the unit for defects before
installing. Report any damage and save
all packing materials if any part is
damaged during transport. We
recommend wearing work gloves when
installing this fixture to prevent dirt and oil
from coming into contact with the fixture.
• Use the CH4 mounting bracket as a
template to mark the screw holes location
onto the intended surface.
03

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
IL3525 Series
LED Industrial Lighting
CH4 - Four Link Chain Chandelier Mounting System
3.
4.
• Align and tighten the CH4 (Four Linked
Chain Chandelier Mounting Bracket) onto
the hexagon spacers using the hexagon
nuts and washers provided in the kit.
• Hang all four chains to the CH4
mounting bracket by inserting the spring
loaded hooks through the round eyelet
anchors.
Concrete Wood
• For concrete surfaces use a Ø5/16"
(8.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
(Make sure that all dimensions are precise)
• Hammer all four concrete anchors into the
four drilled holes until they are flush with
the surface.
• Tighten all four hexagon spacers firmly
into the concrete anchors.
• For wooden surfaces use a Ø1/8"
(5.0mm) drill bit and drill holes 1-3/8"
(35mm) deep at the marked locations.
• Tighten all four hexagon spacers firmly
into the drilled holes.
04

Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
INSTALLATION GUIDE
IL3525 Series
LED Industrial Lighting
CH4 - Four Link Chain Chandelier Mounting System
5.
• Hang the fixture from the four chains by
inserting the spring loaded hooks through
the round eyelet anchors located on top of
the fixture.
6.
• Insert the fixture input AC cable wire
through the center hole of the CH4
mounting bracket and pass it through the
side exiting hole of the mounting bracket.
05

INSTALLATION GUIDE
IL3525 Series
LED Industrial Lighting
Made in Taiwan
Designed and Engineered in the USA
R HS
o
compliant
IP68
CH4 - Four Link Chain Chandelier Mounting System
7.
• Before connecting any AC input electrical wiring to the electric grid make sure to Slide OFF power to
all appropriate circuit at the breaker box.
• Carefully unscrew and remove the junction-box cover.
• Insert AC line input wires through the knock out hole. Install proper electrical fittings at the knockout
hole for wire protection, provided with the installation kit. Nominal strip length with 5/8" (15 mm) long.
• Connect the AC input line (L) wire to the corresponding marked AC line (L-BLACK) wire with a wire
nut. Connect the AC input neutral (N) wire to the corresponding marked AC neutral (N-WHITE) wire
with a wire nut. Ground fixture by connecting the input ground wire ( ) to the corresponding marked
ground wire ( - GREEN) on the quick connect terminal block.
• Firmly tighten junction-box cover before testing the fixture.
Warning!
06

INSTALLATION GUIDE
IL3525 Series
LED Industrial Lighting
CH4 - Four Link Chain Chandelier Mounting System
RISK OF ELECTRIC SHOCK
• Installation must be done by a certified electrician and / or qualified personnel.
• Make sure to turn OFF the main power from the circuit breaker or fuse box before installing, servicing
or inspecting this fixture.
• Make sure all grounding wires are connected correctly.
WARNING
RISK OF FIRE
• Ensure that all line voltage wire is intended for specified product wattage.
• Use UL and / or CE approved wires for all input connections, minimum size required 18 AWG (0.82mm²)
• Do not use this product in environments where the temperatures could exceed 50°C (122°F)
NOTE
• While the fixture is ON, do not cover the front surface of the
light fixture or place it on any flat surfaces that would cover
the front air ventilation holes for more than 30 minutes.
This will prevent the fixture from properly cooling via air
convection and can cause the fixture to overheat & fail.
* BEFORE YOU INSTALL this fixture please read these instructions carefully and completely
Dimming
Dim – (Brown)
NOTE: • Ensure that all line voltage wire is intended for specified
product wattage.
• Use UL and / or CE approved wires for all input connections,
minimum size required 18 AWG (0.82mm²)
• Refer to the specific dimmer installation manual for exact
wiring instructions.
N – (White)
L – (Black)
Ground (Green)
Dim + (Blue)
AC Input
Wiring Information
LeD is a trademark of Light Emitting Designs, Inc.
© 2017 Light Emitting Designs, Inc.
IL3525 CH4 INST GUIDE REV04262016
www.lightemittingdesigns.com
2140 N. Hollywood Way #6486 Burbank, CA 91510 USA
tel: [phone], e-mail: [email protected]
07