Stairville 494410 User manual

Matrix Blinder 5x5 RGBWW
Blinder
User Manual

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
03.02.2023, ID: 494410 (V2)

Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 13
4 Installation.................................................................................................................................................. 14
5 Starting up.................................................................................................................................................. 17
6 Connections and operating elements........................................................................................... 19
7 Operating.................................................................................................................................................... 21
7.1 Starting the device........................................................................................................................... 21
7.2 Main menu.......................................................................................................................................... 21
7.2.1 DMX address.................................................................................................................................. 22
7.2.2 DMX mode...................................................................................................................................... 23
7.2.3 Network settings (ARTNET/sACN)........................................................................................... 24
7.2.4 Operating mode ‘Slave’.............................................................................................................. 25
7.2.5 Operating mode ‘Automatic’................................................................................................... 25
7.2.6 Operating mode ‘Preprogrammed automatic show’...................................................... 26
7.2.7 Dimmer............................................................................................................................................. 27
Table of contents
Matrix Blinder 5x5 RGBWW 3
Blinder

7.2.8 Sound control................................................................................................................................ 28
7.2.9 System settings............................................................................................................................. 29
7.2.10 System information................................................................................................................... 34
7.3 Menu overview................................................................................................................................. 38
7.4 Functions in 4-channel DMX mode........................................................................................... 40
7.5 Functions in 9-channel DMX mode........................................................................................... 41
7.6 Functions in 100-channel DMX mode...................................................................................... 47
7.7 Functions in 102-channel DMX mode...................................................................................... 48
8 Technical specications....................................................................................................................... 50
9 Plug and connection assignments.................................................................................................. 52
10 Troubleshooting...................................................................................................................................... 53
11 Cleaning....................................................................................................................................................... 55
12 Protecting the environment.............................................................................................................. 56
Table of contents
4Matrix Blinder 5x5 RGBWW
Blinder

Matrix Blinder 5x5 RGBWW 5
Blinder

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
6Matrix Blinder 5x5 RGBWW
Blinder

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
1.2 Notational conventions
This manual uses the following notational conventions:
General information
Matrix Blinder 5x5 RGBWW 7
Blinder

The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Letterings
Displays
General information
8Matrix Blinder 5x5 RGBWW
Blinder

Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
General information
Matrix Blinder 5x5 RGBWW 9
Blinder

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use only and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent
switching on and o. The device is not suitable for continuous operation.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
Intended use
Safety instructions
10 Matrix Blinder 5x5 RGBWW
Blinder

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable
or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a registered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a
secondary safety attachment, such as a safety cable or a safety chain.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
Safety instructions
Matrix Blinder 5x5 RGBWW 11
Blinder

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately
after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can
damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or re.
NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices of identical construction. The current consumption of all other devices connected in series must
not exceed the values indicated in the technical specications. Otherwise you risk injuries and irreparable damages to the device.
Only connect so many identical devices that the maximum current consumption is not exceeded. Ensure the sucient dimensioning
(wire cross section) of the power cables used for all devices connected in series.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used.
Safety instructions
12 Matrix Blinder 5x5 RGBWW
Blinder

3 Features
The LED blinder is particularly suitable for lighting applications in clubs and discotheques, on
rock stages, in theatres and musicals.
Special features of the device:
n25 RGBWW LEDs (10 W each), arranged in a 5×5 matrix
nControl via DMX (4 dierent modes) and via buttons and display on the unit
n27 preprogrammed automatic shows
nLED matrix allows the display of letters and numbers via DMX
nStrobe eect
nSound control
nAutomatic mode
nFour master / slave modes for up to four interconnected devices that are controlled as one
common large LED matrix
nRugged metal housing with M6 thread holes for easy and stable interconnection of several
units.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
Matrix Blinder 5x5 RGBWW 13
Blinder

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more
than 1.5 m (19.7in).
Provide sucient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
14 Matrix Blinder 5x5 RGBWW
Blinder

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the brackets provided for mounting.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned o.
The safety cable must be attached to the safety cable eyelets.
Mounting options
Installation
Matrix Blinder 5x5 RGBWW 15
Blinder

Please note that this device must not be connected to a dimmer.
Installation
16 Matrix Blinder 5x5 RGBWW
Blinder

5 Starting up
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the rst DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼W).
If the unit is properly connected to a turned on DMX controller, the rst position of the display
is ashing in DMX mode. If not, the device is not receiving a valid DMX signal.
Connections in DMX mode
DMX indicator
Starting up
Matrix Blinder 5x5 RGBWW 17
Blinder

When you congure a group of devices in master/slave mode, the rst unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the rst slave device. Then connect the DMX output of the rst slave device to
the DMX input of the second slave device and so on.
ARTNET IN
LED Matrix Blinder 5x5 RGB WW
FUSE
T2A250V ARTNET2ARTNET1
Max:6A
LED Matrix Blinder 5x5 RGB WW
FUSE
T2A250V ARTNET2ARTNET1
Max:6A
ARTNET INARTNET OUT
Connections in master/slave
mode
Control via ArtNet
Starting up
18 Matrix Blinder 5x5 RGBWW
Blinder

6 Connections and operating elements
LED Matrix Blinder 5x5 RGB WW
FUSE
T2A250V ARTNET 2ARTNET 1
Max: 6A
ö
#
$
% %
#
&
ö
öö
-
,+) *('
Connections and operating elements
Matrix Blinder 5x5 RGBWW 19
Blinder

1 Thread holes (M6), t for connecting elements
2 Safety cable eyelet
3 Bracket for oor placement or hanging
4 Locking screws for the bracket
5 Display
[Mode] | activates the main menu and toggles between menu items. Closes an opened submenu.
[Setup] | selects an option of the respective operating mode
[Up] | increases the displayed value by one
[Down] | decreases the displayed value by one
6[FUSE] | fuse holder
7[Power In] | lockable input socket (Power Twist) for powering the device
8[DMX In] | DMX input, designed as XLR panel plug, 3-pin
9[DMX Out] | DMX output, designed as XLR panel socket, 3-pin
10 [Power Out] | lockable output socket (Power Twist) for powering further devices
11 [ARTNET 1] | RJ45 input for control via ArtNet
12 [ARTNET 2] | RJ45 output to control further devices via ArtNet
Connections and operating elements
20 Matrix Blinder 5x5 RGBWW
Blinder