Safety 1st 015611 User manual

Clean & Comfy Booster Seat
015611 / BO069 User Guide
Age: 6 months to 4 years.
Maximum weight: 20 kg.
Adult assembly required.
• Remove all contents from packaging and discard box and/or poly bags.
Have ready the model number (015611) and date code
(manufacture date) located on underside of the booster seat base.
• Lay out and identify all parts.
• Do not return this product to the place of purchase. If any parts are
missing, please contact our Customer Service Team:
• Before Assembly: Wipe down trays with a soft cloth and warm soapy
water.
WARNING:
•Prevent serious injury or death from sliding out, falls, or
tipping over.
•ALWAYS secure child in the restraint until child is able
to get in and out of the booster seat without help (about
2-1/2years old). The tray, if supplied, is not designed to
hold the child in the chair.
•NEVER leave child unattended.
•NEVER allow a child to push away from table.
•ALWAYS fasten seat and back straps securely to adult chair.
•ALWAYS check security of t to adult chair before each use.
•This booster seat is only to be used with standard kitchen
or dining room chairs. NEVER use this product as a car seat
or bath seat, on a tabletop, stool, swivel chair, or any other
seating surface where the straps cannot secure it properly.
•Prevent serious injury or death. NEVERuse in motor vehicles.
•ALWAYS ensure that all chair protector pads are located
completely on the adult chair surface.
•Discontinue use if damaged, broken or if parts are
missing.
•Keep small parts away from children during assembly.
CAUTION:
© 2014 Dorel Australia Pty Ltd. All Rights Reserved.
Made in CHINA AX: 015611 09/14
safety1st.com.au
Australia
Parts List
A
B
C
F
D
G
E
H
I
J
To Assemble
Insert tray
Tray
Seat
Waist restraint
Seat attachment hooks & snaps
Base
Adult chair topper
Protector pad (3)
Chair straps (2 sets)
Tray release
1 Preassembled Parts C D
F H
:
Three protector pads (Figure 1a) and
child waist restraint (Figure 1b) will
come preassembled to base and seat,
respectively.
1a 1b
Waist restraint
D
J
E
A
B
C
F
G
I
D
J
H
E
A
B
C
F
1
Dorel Australia Pty Ltd
655-685 Somerville Road
Sunshine West, Victoria, 3020
Melbourne: [phone]
Australia wide (local call cost): 1300 809 526
Hours: 8:30 am - 5:00 pm, Monday to Friday
Email: customerservic[email protected]om.au
IGC Dorel New Zealand Ltd
14 Sir William Avenue
East Tamaki, Auckland, 2013
Auckland: [phone]
NZ wide (toll free): 0800 628 000
Hours: 8:00 am - 5:00 pm, Monday to Friday
Email: customerservic[email protected].nz

2
G
I
H
2
Attach Seat C EC F :
Place seat face-down on flat surface with hooks and snaps
facing upward (Figure 2a). Align base and seat as shown
(Figure 2b). Turn seat so that underside of the base faces
towards you. Insert hooks on the seat into the corresponding
slots on the base (Figure 2c). Ensure hooks are inserted
correctly; locking tabs should slide beneath them (Figure 2d).
To Assemble (continued)
3Secure Seat E F :
Place hands on seat base as seen below and firmly push base
until it is fully engaged with seat (Figure 3a). After seat clicks
into place, ensure that hooks and snaps are locked and secure
as seen below (Figure 3b).
Note: If seat is not secure, use force to push base onto seat to
ensure proper attachment.
3b3a
Snap
Hook
2b2a
Hook
Snap
2c 2d
4Attach Chair Straps
(2 sets) F I :
Locate chair straps.
Snap buckles together
(Figure 4a).
With one set of straps,
insert folded ends into
two openings on back of
the base (Figure 4b).
With second set of
straps, insert folded
ends into two openings
on either side of the
base (Figure 4c).
Pull each strap to ensure
strap is secure.
4b
4a
4c

1Protect Adult Chair G:
Place chair topper on adult
seat (Figure 1a).
Place seat on chair, over
chair topper (Figure 1b).
To Use
1a 1b
3
Booster and Tray:
Clean before first use and after each use. Wipe with soft cloth and
warm soapy water. Use only mild non-abrasive soap. Both trays are
dishwasher safe (top rack only).
3 Restraint System D:
Position your child in booster seat. Place
restraint straps between legs and buckle
into position (Figure 3a). Adjust restraint
straps for proper fit (Figure 3b).
4 Attach Tray A B J:
Slide tray into slots on either side of
seat until it clicks into place. Pull on tray
to ensure that it is completely engaged
(Figure 4a).
Insert tray: Align on main tray for use.
To remove tray: Depress tray releases
on both sides of tray and pull away from
seat (Figure 4b).
WARNING:
The tray is not a restraint device.
ALWAYS use restraint straps to
secure child to booster seat.
3a 3b
To Clean
2a
2 Chair Straps I:
Pass the bottom chair strap completely
under base of chair and secure buckle
(Figure 2a). Tighten chair strap for
security.
Pass rear chair strap around back of
chair and secure buckle (Figure 2b).
Tighten chair strap for security.
2b
•
•
•
•
•
WARNING:
ALWAYS use both sets of chairstraps to
completely secure booster to the chair.
If chair is cushioned and cushion cannot
be removed, BE CERTAIN that the
bottom chair strap is fastenedsnugly
after putting child in seat.
Make sure all pieces are assembled
correctly. Test for proper assembly
before placing child in seat.
ALWAYS secure child in booster seat
using restraint straps.
ALWAYS ensure that all chair protector
pads are located completely on the adult
chair surface.
4a
4b

Be inspired by the
range of products at
safety1st.com.au
Join Us on facebook
www.facebook.com/Safety1stAustralia
Dorel Australia Pty Ltd
655-685 Somerville Road
Sunshine West, Victoria, 3020
Email: customerservic[email protected]om.au
Phone: [phone]
Hours: 8:30 am - 5:00 pm, Monday to Friday
Specifications are subject to change without notice.
Copy or reproduction without permission is prohibited.
© 2013 Dorel Australia Pty Ltd. All Rights Reserved.
www.dorel.com.au
Australia
IGC Dorel New Zealand Ltd
14 Sir William Avenue
East Tamaki, Auckland, 2013
Email: customerservic[email protected].nz
Phone: [phone] (toll free)
Hours: 8:00 am - 5:00 pm, Monday to Friday