Sailor 6248 User manual

What’s in the box?
Dimensions for the VHF
How to install the VHF on desktop and overhead
INSTALLATION GUIDE
SAILOR 6248 VHF
How to install the handset
U-Mounting
Bracket
Gasket
Flush Mount
Bracket (2 pcs.)
Fuse
6.3x3.2mm
(10AT)
Cradle
Wheel Knob
(2 pcs.)
Screw M4x45
TORX 20
(5 pcs.)
Square Nut
M4x7x2.2
(5 pcs.)
Screw M4x12
TORX 20 (2 pcs.)
Screw ø3.9x19
TORX 20 (2 pcs.)
Screw M4x12
TORX 20
(5 pcs.)
Screw ø3.9x19
TORX 20
(5 pcs.)
Handset
Very important information!
Do not remove the membrane.
If you remove the membrane the
radio will not be waterproof.
How to install the VHF flush mount
Cap for LTW
RJ45
Connector
Cap for LTW
BD/BU
Connector
(3 pcs.)
Fuse
6.3x3.2mm
(10AT)
Screw M4x12
TORX 20 (4 pcs.)
Screw ø3.9x19
TORX 20 (4 pcs.)
SAILOR 6090
Power Converter
User Manual
Power
Cable
Transceiver
Tilting ±20°
How to prevent water ingress
Connector for Handset or Hand Microphone - If not used, put the cap
from the ACC connector on the front connector to prevent water ingress.
Handset for transceiver
This Handset has a hook-on/off function,
which is activated by a small magnet embedded
in the cradle.
The cradle must be installed as illustrated in
order to ensure the hook-on/off functionality
of the Handset.
75mm
62mm
226mm
* 120mm
min. 100mm
Space for handset access
Space for cable and handset cable
54mm
45mm
135mm
39655C
Weight
Handset for transceiver 0.4 kg
TT99-129987-A

Flush mount template
Remove material from shaded area only!
99-132034
89mm
227mm
R2.5mm x 4
[e-mail] •thrane.com
98-132282-B
Scale 1:1
Cutout template for flush mounting of the VHF
IMPORTANT!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
System Configuration - Example
Drilling plan on desktop and overhead How to install the SAILOR 6090 Power Converter
99-131985
200mm
53mm
71mm
247mm
9mm
4 x M4 or hole for
self-tapping ø3.9
23.5mm
VHF
99-133232-A
SAILOR 6248/6249
Handset
SAILOR 6201/03
Power Converter
SAILOR 6090
12V DC
ACC
Handset
SAILOR 6201/03
Ground
12V DC
+Vout (Red)
-Vout (Blue)
Remote on/off
NC
Screen/Ground
-Vin
+Vin
24V DC
Remove jumper
for remote on/off
from VHF
Aerial
RX/TX
24V DC
Drilling plan
For further information, please download the installation
manual part no. 98-135548 at http://esupport.thrane.com