Sal Sgw3btam Guide

Nominal frequency (Hz) Product installation orientation

Operating ambient min/max (°C) Product application

Operating humidity Pixie connectivity

Storage ambient limit (°C)*IP rating

Storage humidity Attachment type

Horizontal wall mount or desktopN/A

*IP rating for interior products: The designated IP rating is “from below the ceiling” unless otherwise specified.

*IP rating ALL products: Termination of the product must be made in accordance with the IP rating.

Model No. Input (V) Min / Max loads Colour

Dimension L x W x H (mm)

PIXIE SGW3BTAM GATEWAY G3 product electrical and installation specification effective 3/9/2021.

0 to 40 Interior residential or commercial

10% to 85% RH, NC

0 to 40 20

N/A10% to 85% RH, NC

Yes

Wireless

Bluetooth Mesh Technology

IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE INSTALLATION AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.

MUST BE INSTALLED

BY A LICENSED

ELECTRICIAN

DIY

SAL products are designed in accordance with all mandatory International and AS/NZS Standards, which require installation in

accordance with AS/NZS3000 by a qualified installer and regular cleaning and maintenance of the equipment. Products are

sold in accordance with the following instructions and SAL standard terms and conditions of sale, available via www.sal.net.au.

Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance

guarantee unless expressly confirmed in writing by SAL at the time of order.

SAL National Pty Ltd.

40 Biloela Street

Villawood NSW 2163 ABN 21 633 189 474

www.sal.net.au

| Page 1 of 2

General product application requirements (if applicable) :

3. Product application

The PIXIE Gateway G3 is the new generation gateway in SAL PIXIE smart system. It not only manages your PIXIE smart system locally, but also bridges your PIXIE

smart system with the internet, enabling you to control PIXIE products in your home from anywhere of the world. It’s the key product to integrate PIXIE system with third

party platforms like Google Home, Amazon Alexa, Samsung Smartthings, and Apple Siri.

SET buttonPower input LAN port (RJ45)

Back view

Front view

Front LED indicators

SGW3BTAM 5V DC - 1A N/A Dark grey 95 x 95 x 24

Configuration Guide:

When creating a new HOME - for new users

1. Launch the PIXIE PLUS App

2. Follow the App to register an accont, and log in

3. Tap Create a new HOME

4. Search for the gateway in the App

5. When the gateway is found and identified in the App, select the gateway,

tap Next

6. Then follow the guides in the app to finalize the configuration

To replace gateway for an existing HOME - for existing PIXIE PLUS users

Installation Guide:

1. Connect the power supply to the gateway power input port

2. Connect the gateway with router via a LAN cable, plug one end of the

LAN cable to the router, and the other end to the LAN port of the gateway

3. Plug the power supply to a power outlet

1. Launch the PIXIE PLUS App

2. Tap the gear icon in the top-right corner of home page

3. Select Home Management in the Setting list

4. Select the HOME that is required to replace gateway

5. On seeing the Home Settings list, tap the Gateway Info

6. On the Gateway Info page, tap the top-right three dots , then tap Remove,

when seeing the pop-up window asking for a confirmation, tap OK to confirm

7. Then, text will appear in the centre of the page, indicating the need to add a

PIXIE gateway

8. Tap the large icon in the middle to start the process of adding a new gateway for

this HOME

9. Then follow the step-by-step guides in the app to finalize the process

1. Recycling – SAL encourages recycling, please consider the environment when disposing of packaging, batteries & components.

2. Product maintenance – In line with the relevant design standards and to protect your investment, it is important to have in place a routine cleaning program that

reflects the installation environment and maintains the product in a clean and functional condition.

IMPORTANT - The supply must be isolated before any product maintenance or cleaning is conducted. In addition, damage to ANY cable or cord supplied with the

product must be addressed as follows; For attachment type X having a specially prepared cable, if the external flexible cable is damaged, it must be replaced by an

equivalent cable exclusively available from the manufacturer or authorised installer. For attachment type Y, if the external flexible cable is damaged, it must be

exclusively replaced by an equivalent cable by the manufacturer or authorised installer. For attachment type Z, if the external flexible cable is damaged, the cable

cannot be replaced and the luminaire must be destroyed.

Feature:

• Two methods available to connect to the local area network:

LAN cable or WiFi, choose the option which is suitable

• Four LED indicators for clear status display & feedback

• Power supply included

• Designed for use with SAL PIXIE smart products only

• Imp roved system performance, allowing up to 128 new generation PIXIE

Master devices (product part no. ending with BTAM) in one network

Please make sure the PIXIE PLUS app is installed on your smartphone and is up to date before the configuration of the gateway.

SET

LAN

5V 1A

Brief Description:

Scan QR code or go to App store (IOS) or Google Play (Android) to download the free PIXIE

app to your smart phone. IOS: Requires IOS

6.0 or later. Compatible with iPhone, iPad and iPad touch Android: Requires Android 4.4 or

above, devices must support Bluetooth 4.0

Specifications above are for reference only and may vary without prior notice

LED Indicator Introduction:

Status explanation for the four front LED indicators

SET button operation

Status explanation for the LED indicator on the RJ45 port

Internet LAN (RJ45 port) Wi-Fi Bluetooth

This internet connection is waiting to

be configured

Internet connection fail

The internet connection is configuring

The gateway is currently working

under offline mode (does not

require internet connection to work)

The internet connection is successful

Blink in blue (once per

1 second)

Blink slowly in blue (once

per 10 seconds)

Solid blue

Solid red

This LAN (RJ45 port) connection is

waiting to be configured

Fail to connect to the local area

via RJ45 port

The LAN (RJ45 port) connection

is configuring

The gateway is currently NOT using

RJ45 port to connect to the local

The gateway is using RJ45 port

to connect to the local area network

Wi-Fi connection to the local area

The Wi-Fi connection is configuring

The gateway is currently NOT

using Wi-Fi to connect to the

The gateway is using WIFI to connect

to the local area network (router)

and the connection is successful

Bluetooth connection fail

The Bluetooth connection

is configuring

The Bluetooth connection

is successful

Long press until the four LED indicators turn off, then release

Reset the gateway to

factory default This operation will clear all the settings and data

The four LED indicators will turn off, and turn on together

The four LED indicators flash in blue and red, then turn off, and light up again

This Wi-Fi connection is waiting

to be configured

This gateway is waiting to

be configured

Indicator

Status

Solid orange

Operation

Long press for

5 seconds

9 clicks

Reboot the gateway

Function Description LED Indicator Remark

Solid green

Blink in green

The RJ45 LAN port does not have a LAN cable connected

The RJ45 LAN port is connected to a LAN cable but no data transmission is being received ( not connected to a router)

The RJ45 LAN port is connected to a LAN cable and data transmission is being received (connected to a router)

Blink in red (once per

1 second)

Warranty – In accordance with SAL’s standard terms and conditions of sale, SAL warrant this product to be free from defects in materials and or workmanship for a

period as stated below for goods not subject to incorrect installation, maintenance, operation, mishandling, environmental, unauthorised modifications or electrical

operating conditions outside the nominated product specification as detailed in these installation instructions. The benefits to you given by this warranty are in addition to

other rights and remedies you have under law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or

replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warranty term – Residential usage (24) months, Commercial usage (12) months and batteries where supplied (12) months from date of purchase. For New Zealand,

please refer to www.sal.co.nz for warranty conditions and service.

How to make a claim?

Step # 1 – Within 30 days of the fault discovery, please contact the original place of the SAL product purchase during standard (local) business hours, with the following

information (a) proof of purchase (b) description and quantity of the claimed fault (c) address of installation. (d) operating hours of the product.

Step # 2 – It is then the responsibility of the original place of product purchase to report the matter to SAL aftersales;

NSW | ACT - SAL National Pty Ltd, 40 Biloela Street Villawood NSW 2163 | P # 02 9723 3099

QLD - SAL National Pty Ltd, 36 Whitelaw Place Richlands QLD 4077 | P # 07 3879 5999

VICT | TAS - SAL National Pty Ltd, 46-48 Keys Road Moorabbin Victoria 3189 | P # 03 9532 3168

SA | NT - SAL National Pty Ltd, Unit 1, 9 Alfred Avenue, Beverley SA 5009 | P # 08 7084 1958

WA - SAL National Pty Ltd, 29 Beringarra Av Malaga WA 6090 | P # 08 9248 7458

NZ - Hamer, 130 Bush Road, Albany, Auckland, 0632 | P # 0800 239 239

Step # 3 - Upon review of your claim and if the product is required to be returned to SAL for technical evaluation, then at the owners expense the product must be

returned to SAL as per the above nominated locations.

Step # 4 - Pending the evaluation, the claim will be validated resulting in the product being repaired or replaced with the same or best equivalent product at the

discretion of SAL, or rejected if the product fault was found to be caused by conditions beyond the responsibility of SAL warranty obligations. Consideration of