Salto WRD 0E4 Series User manual

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
221543-ED.3-24/07/2018
Installation guide
XS4 Reader
European view
22
95,5
95,5
2a
2b
2a
2b
83,5
q
27
95,5
q
"E" "S"
WRDx0E4x
WRDx0S4x
WRDx0E4xK
WRDx0s4xK series
Template
Plantilla
Schablone
Gabarit de perçage
Sjabloon
Mall
60
60
60
60
52
52
R6
60
60
95,5
95,5
15,5
83,5
q
20,5
E
Card reader installation guide
Guía de instalación lector de tarjetas
Kartenleser installationsanleitung
Guide d'installation lecteur de cartes
Kaartlezer Installatiehandleiding
Kortläsare installationsguide
Eng
D
F
NL
SVE
Installation Instalación Installation Installation Installatie Installation
Eng EDFNL SVE
12 3
Real size Real size
1/4
PZ1 (X4)
TORX 10 (X2)
3M SCOTCHLOK BUTT CONNECTOR UY2 (X4)
TM TM
(X4)
Gang electrical standard box
Módulo caja eléctrica estándard
Standard schalterdose
Plots d'encastrament standard
Standaard elektrische inbouwdoos
Standard apparatlada
Eng
E
D
F
NL
SVE
Eng
E
D
F
NL
SVE

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
221543-ED.3-24/07/2018
Installation guide
XS4 Reader
European view
Cable type Reader Reader
+Keypad
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
T isted pairs
AWG18
Note
2
328ft
100m
820ft
250m
1312ft
400m
196ft
60m
492ft
150m
918m
280m
Cable type and max. distances
Cable type Reader Reader
+keypad
Stromaufnahme
Note 1
Consumo
Nota 1
Voeding in opm 1
Strömkonsumtion
Not 1
E
D
F
NL
SVE
100m
250m
400m
60m
150m
280m
Kabel Läsare Läsare
+Knappsats
Kabeltyper och max avstånd
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 + SP224861/SP224895
Partvinnad
AWG18
Not
2
Teknisk data:
Arbetsområde
RF data
Not. 1: Installatör måste ta med denna information
för att beräkna strömåtgång
Not. 2: Ej med Scotchlock butt UY2 kontakt
SALTO rekommenderar att en kabel per väggläsare
används.
Min Max Enhet
Läsare 150 mA
Läsare+Knappsats 250 mA
Min Cen. Max Enhet
RFID Frekvents 13.56 Mhz
Bluetooth Smart
Frekvents 2.4 2.445 2.483 Ghz
2/4
%
ºC
ºC
85
+66
+66
35
-25
-35
EnhetMax.Min.
Fukt
Temperature WRD0J - WRD0GK - WRD0JK
Temperature WRD0B - WRD0S - WRD0BK - WRD0SK
Po er Consumption
Note 1
RF characteristics
Note 1: Installer must take this data into
account to dimension the
CU42xx po er supply
Note 2: Not use ith Scotchlok butt connector UY2
SALTO recommends to use one cable per all reader.
Min Max Unit
Reader 150 mA
Reader+Keyboard 250 mA
Min Cen. Max Unit
RFID frequency 13.56 Mhz
Bluetooth Smart
frequency 2.4 2.445 2.483 Ghz
100m
250m
400m
60m
150m
280m
Tipo de cable Lector Lector
+Teclado
Tipo de cable y distancias max.
UTP Cat5e 2pares
AWG24
UTP Cat5e 4 pares
AWG24 + SP224861/SP224895
Pares trenzados
AWG18
Nota
2
Características eléctricas
Condiciones ambientales
Características RF
Nota 1: El instalador ha de tener en cuenta la
dimensión del alimentador de la CU42xx
Nota 2: No usar el conector Scotchlok butt UY2
con este tipo de cable
SALTO recomienda utilizar un cable por cada
lector mural.
Min Max Unit
Lector 150 mA
Lector + teclado 250 mA
Min Cen. Max Unit
Frecuencia RFID 13.56 Mhz
Frecuencia
Bluetooth Smart 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnidadMax.Min.
Humedad
Temperatura WRD0J - WRD0GK - WRD0JK
Temperatura WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Kabeltyp Leser Leser
+Keypad
Verkabelung und max. Entfernungen
UTP Cat5e 2Paar
AWG24
UTP Cat5e 4 Paar
AWG24 + SP224861/SP224895
T isted-pair
AWG18
Note
2
Elektronische Eigenschaften:
Umgebungsbedingungen
RF Frequenzen
Note 1: Bitte beachten Sie die Stromaufnahme
bei der Planung des Netzteils für die CU42XX
Note 2: Nicht ver enden mit den Scotchlok
Einzeladerverbinder UY2
SALTO empfiehlt die Ver endung einer separaten
Leitung je Wandleser.
Min Max Einheit
Leser 150 mA
Leser+Keypad 250 mA
Min Mitte Max Einheit
RFID Frequenz 13.56 Mhz
Bluetooth Smart
Frequenz 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
EinheitMax.Min.
Feuchtigkeit
Temperatur WRD0J - WRD0GK - WRD0JK
Temperatur WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Type de câble Lecteur Lecteur
+Clavier
Type de câble
UTP Cat5e 2 paires
AWG24
UTP Cat5e 4 paires
AWG24 + SP224861/SP224895
Paire torsadée
AWG18
Note
2
Caractéristique électronique
Condition de fonctionnement Consommation
Note 1
Caractéristiques RF
Note 1: l'installateur doit calculer l'alimentation
nécessaire pour alimenter la CU42xx .
Note 2: Ne pas utiliser le connecteur Scotchlok UY2
avec ce type de câble
SALTO recommande d'utiliser un câble pour chaque
lecteur mural
Min Max Unité
Lecteur 150 mA
Lecteur + Clavier 250 mA
Min Cen. Max Unité
Fréquence RFID 13.56 Mhz
Fréquence
Bluetooth Smart 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnitéMax.Min.
Humidité
Température WRD0J - WRD0GK - WRD0JK
Température WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Kable type Wandlezer Wandlezer
+Keypad
Vermogen en max. afstand
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 + SP224861/SP224895
T isted pair
AWG18
opm
2
Technische gegevens:
Omgeving
RF karakteristieken
Opm. 1: Installateur moet deze info meenemen voor
de berekening van de voeding voor de CU42xx
Opm. 2: 3M Scotchlok 2-voudig draad connectors
NIET GEBRUIKEN !!!
SALTO adviseert enkel één kabel per andlezer te
gebruiken.
Min Max Unit
Wandlezer 150 mA
Wandlezer+Keyboard 250 mA
Min Cen. Max Unit
RFID frequency 13.56 Mhz
Bluetooth Smart
frequency 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnitMax.Min.
Vochtigheid
Temperatuur WRD0J - WRD0GK - WRD0JK
Temperatuur WRD0B - WRD0S - WRD0BK - WRD0SK
Eng
%
°C
°F
°C
°F
85
+66
+150
+66
+150
35
-25
-13
-35
-31
Humidity
Temperature WRD0J - WRD0GK - WRD0JK
Temperature WRD0B - WRD0S - WRD0BK - WRD0SK
UnitMax.Min.
Operation conditions
Unit
Electrical characteristics

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
221543-ED.3-24/07/2018
Installation guide
XS4 Reader
European view
Only conect to CU42xx
Solo conectar a CU42xx
Nur für Steuereinheit CU42xx
Connecter uniquement CU42xx
Alleen aansluiten aan CU42xx
Ansluts endast till CU42xx
Installation example:
Ejemplo de instalación:
Installationsbeispiel:
Exemple d’installation:
Installatievoorbeeld:
Installationsexempel:
Exemple d’installation avec connecteur RJ45 :
Installatie voorbeeld RJ45:
Installationsexempel RJ45:
Installation example with RJ45:
Ejemplo de instalación RJ45:
Innstallationsbeispiel für RJ45:
READER 1
A
B
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Ethernet
10Base-T
100Base-TX
ON
12V DC Input
+
A
B
-
12V DC Output (1A)
Power Input: 12V DC -1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Model: CU42E0
Red
Rojo
Rot
Rouge
Rood
Röd
B
A
-
+
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
3M Scotchlok butt connector UY2.
Crimp with cap side down.
Conector 3M Scotchlok butt UY2.
Crimpar con la tapa hacia abajo.
3M Scotchlok butt Einzeladerverbinder UY2.
Mit der Kappe nach unten zusammendrücken.
Connecteur 3M Scotchlok butt UY2.
Crêper avec le capuchon vers le bas.
3M Scotchlok draad connectors - UY2.
Krimp/aanknijpen met het gekleurde deksel naar
beneden.
3M kontakt Scotchlok butt UY2.
Monteras med platta sidan neråt.
TM TMTM
TM TM
TM TM
TM TM
TM TM
TM TM
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
Minimum distance between readers 20in (50cm).
Distancia mínima entre los lectores 20in (50cm).
Mindestabstand zwischen Lesern 20in (50cm).
Distance minimale entre les lecteurs doit être de 20in (50cm).
Minimale afstand tussen de lezers 20in (50cm.
Minsta avstånd mellan läsare 20in (50cm).
E
Eng
D
F
NL
SVE
Same pair
Même paire
Mismo par
Gleiches Paar
Hetzelfde paar
Samma par
Cable connection
Cableado
Verdrahtung
Câblage
Draadwerk
Ledningar
Verde
Amarillo
Negro
Rojo
Vert
Jaune
Noir
Rouge
Grün
Gelb
Sch arz
Rot
B
A
Green
Yello
Black
Red
+V
Groen
Geel
Z art
Rood
Grön
Gul
Svart
Röd
Eng Esp Fra Deu Ned Sve
READER 1
A
B
12V DC Input
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
+
A
B
-
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Model: CU4200
12V DC Output (1A)
ON
Power Input: 12V DC -1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Optional
Opcional
Optioneel
Optionnelle
Facultatief
Valfritt
SP224861 SP224895
Optional
Opcional
Optioneel
Optionnelle
Facultatief
Valfritt
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
Black
Negro
Schwarz
Noir
Zwart
Svart
E
Eng
D
F
NL
SVE
3/4

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
221543-ED.3-24/07/2018
Installation guide
XS4 Reader
European view
Eng
E
D
F
NL
SVE
Red
Red 5x(50/50x3+off300)
Green
Red
Green 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
High pitched 50/50
High pitched 5x(50/50x3 + off 300)
Lo pitched
Lo pitched
High pitched/Lo pitched 400/200
High pitched
Lo pitched 50/100
Signal Light Time Buzzer Time
(sec) (sec)
Card Rejection
Privacy or emergency status
Standard opening
Standard locking
Open plus office
CLR Button
Reset
Rojo
Rojo 5x(50/50x3+ apagado 300)
Verde
Rojo
Verde 400/200
Naranja
Naranja 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Agudo 50/50
Agudo 5x(50/50x3 + apagado 300)
Medio
Grave
Agudo/Grave 400/200
Agudo
Medio 50/100
Señal Luz Tiempo Buzzer Tiempo
(seg) (seg)
Rechazo de Tarjeta
Rechazo por Privacidad o Emergencia
Apertura Normal
Cierre Normal
Abrir y Paso
Botón CLR (3)
Reset
Rot
Rot 5x(50/50x3+ aus300)
Grün
Rot
Grün 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Kont.
450 msg
1
3
0,3
0,2
2,4
Kont.
450 msg
Hoher Ton 50/50
Hoher Ton 5x(50/50x3 + aus 300)
Tiefer Ton
Tiefer Ton
Hoher Ton /Grave 400/200
Hoher Ton
Tiefer Ton 50/100
Signal LED Zeit Buzzer Zeit
(Sek) (Sek)
Karte abgelehnt
Bitte-nicht-stören oder Notschließung
Normale Türöffnung
Verschluss der Tür
Office-Mode aktiviert
CLR Taste gedrückt
Reset
Rouge
Rouge 5x(50/50x3+ off300)
Vert
Rouge
Vert 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Aigu 50/50
Aigu 5x(50/50x3 + off 300)
Grave
Grave
Aigu/Grave 400/200
Aigu
Grave 50/100
Signal Voyant Temps Buzzer Temps
(sec) (sec)
Carte rejetée
Privacité ou état d’urgence
Ouverture Standard
Verrouillage Standard
Ouverture passage libre
Bouton CLR
Reset
Rood
Rood 5x(50/50x3+ off 300)
Groen
Rood
Groen 400/200
Oransje
Oransje 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Hoge tonen 50/50
Hoge tonen 5x(50/50x3 + off 300)
Lage tonen
Lage tonen
Hoge tonen /Grave 400/200
Hoge tonen
Lage tonen 50/100
Signaal LED indicatie Time Geluid Time
(sec) (sec)
Geen rechten
Privacy- of noodsluiting
Standaard opening
Standaard sluiting
Open plus loopstand
CLR knop
Reset
Röd
Röd 5x(50/50x3+ av 300)
Grön
Röd
Grön 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Konst.
450 msg
1
3
0,3
0,2
2,4
Konst.
450 msg
Hög ton 50/50
Hög ton 5x(50/50x3 + av 300)
Låg ton
Låg ton
Hög ton 400/200
Hög ton
Låg ton 50/100
Händelse Ljussignal Tid Summer Tid
(sek) (sek)
Nekat tillträde
Stör ej eller Nödläge
Standard öppning
Standard stängning
Öppning med kontorsfunktion
CLR Knapp
Nollställning
SIGNALLING
SEÑALÉCTICA
SIGNALE
SIGNALISATION
SIGNALERING
SIGNALERING
4/4

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
224899-ED.3- 24/07/2018
Installation guide
European view
© 2018 SALTO Systems S.L.
2a
2b
2a
2b
5-9/16" (141mm)
3-3/4"
(95,5mm)
1-5/32"
(29,5mm)
3- 9/32" (83,3 mm)
5-9/16" (141mm)
3-3/4"
(95,5mm)
3-9/32" (83,3mm)
29/32"
(23mm)
WRDx0A4x
WRDx0A4xK series
E
Card reader installation guide
Guía de instalación lector de tarjetas
Kartenleser installationsanleitung
Guide d'installation lecteur de cartes
Kaartlezer Installatiehandleiding
Kortläsare installationsguide
Eng
D
F
NL
SVE
PZ1 (X4)
TORX 10 (X2)
3M SCOTCHLOK BUTT
CONNECTOR UY2 (X4)
TM TM
(X4)
Installation Instalación Installation Installation Installatie Installation
Eng EDFNL SVE
12 3
Real size Real size
GANG ELECTRICAL STANDARD BOX
MÓDULO CAJA ELÉCTRICA ESTÁNDARD
STANDARD SCHALTERDOSE
PLOTS D'ENCASTREMENT STANDARD
STANDAARD ELEKTRISCHE INBOUWDOOS
STANDARD APPARATLADA
XS4 Reader
Eng
E
D
F
NL
SVE
1/4

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
224899-ED.3- 24/07/2018
Installation guide
European view
© 2018 SALTO Systems S.L.
Cable type Reader Reader
+Keypad
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 +
SP224861/SP224895
T isted pairs
AWG18
Note
2
328ft
100m
820ft
250m
1312ft
400m
196ft
60m
492ft
150m
918m
280m
Cable type and max. distances
Cable type Reader Reader
+keypad
Stromaufnahme
Note 1
Consumo
Nota 1
Voeding in opm 1
Strömkonsumtion
Not 1
Eng
E
D
F
NL
SVE
WRDx0A4xx Card reader
100m
250m
400m
60m
150m
280m
Kabel Läsare Läsare
+Knappsats
Kabeltyper och max avstånd
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 + SP224861/SP224895
Partvinnad
AWG18
Not
2
Teknisk data:
Arbetsområde
RF data
Not. 1: Installatör måste ta med denna information
för att beräkna strömåtgång
Not. 2: Ej med Scotchlock butt UY2 kontakt
SALTO rekommenderar att en kabel per väggläsare
används.
Min Max Enhet
Läsare 150 mA
Läsare+Knappsats 250 mA
Min Cen. Max Enhet
RFID Frekvents 13.56 Mhz
Bluetooth Smart
Frekvents 2.4 2.445 2.483 Ghz
2/4
%
ºC
ºC
85
+66
+66
35
-25
-35
EnhetMax.Min.
Fukt
Temperatur WRD0J - WRD0GK - WRD0JK
Temperatur WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Tipo de cable Lector Lector
+Teclado
Tipo de cable y distancias max.
UTP Cat5e 2pares
AWG24
UTP Cat5e 4 pares
AWG24 + SP224861/SP224895
Pares trenzados
AWG18
Nota
2
Características eléctricas
Condiciones ambientales
Características RF
Nota 1: El instalador ha de tener en cuenta la
dimensión del alimentador de la CU42xx
Nota 2: No usar el conector Scotchlok butt UY2
con este tipo de cable
SALTO recomienda utilizar un cable por cada
lector mural.
Min Max Unit
Lector 150 mA
Lector + teclado 250 mA
Min Cen. Max Unit
Frecuencia RFID 13.56 Mhz
Frecuencia
Bluetooth Smart 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnidadMax.Min.
Humedad
Temperatura WRD0J - WRD0GK - WRD0JK
Temperatura WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Kabeltyp Leser Leser
+Keypad
Verkabelung und max. Entfernungen
UTP Cat5e 2Paar
AWG24
UTP Cat5e 4 Paar
AWG24 + SP224861/SP224895
T isted-pair
AWG18
Note
2
Elektronische Eigenschaften:
Umgebungsbedingungen
RF Frequenzen
Note 1: Bitte beachten Sie die Stromaufnahme
bei der Planung des Netzteils für die CU42XX
Note 2: Nicht ver enden mit den Scotchlok
Einzeladerverbinder UY2
SALTO empfiehlt die Ver endung einer separaten
Leitung je Wandleser.
Min Max Einheit
Leser 150 mA
Leser+Keypad 250 mA
Min Mitte Max Einheit
RFID Frequenz 13.56 Mhz
Bluetooth Smart
Frequenz 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
EinheitMax.Min.
Feuchtigkeit
Temperatur WRD0J - WRD0GK - WRD0JK
Temperatur WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Type de câble Lecteur Lecteur
+Clavier
Type de câble
UTP Cat5e 2 paires
AWG24
UTP Cat5e 4 paires
AWG24 + SP224861/SP224895
Paire torsadée
AWG18
Note
2
Caractéristique électronique
Condition de fonctionnement Consommation
Note 1
Caractéristiques RF
Note 1: l'installateur doit calculer l'alimentation
nécessaire pour alimenter la CU42xx .
Note 2: Ne pas utiliser le connecteur Scotchlok UY2
avec ce type de câble
SALTO recommande d'utiliser un câble pour chaque
lecteur mural
Min Max Unité
Lecteur 150 mA
Lecteur + Clavier 250 mA
Min Cen. Max Unité
Fréquence RFID 13.56 Mhz
Fréquence
Bluetooth Smart 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnitéMax.Min.
Humidité
Température WRD0J - WRD0GK - WRD0JK
Température WRD0B - WRD0S - WRD0BK - WRD0SK
100m
250m
400m
60m
150m
280m
Kable type Wandlezer Wandlezer
+Keypad
Vermogen en max. afstand
UTP Cat5e 2 pairs
AWG24
UTP Cat5e 4 pairs
AWG24 + SP224861/SP224895
T isted pair
AWG18
opm
2
Technische gegevens:
Omgeving
RF karakteristieken
Opm. 1: Installateur moet deze info meenemen voor
de berekening van de voeding voor de CU42xx
Opm. 2: 3M Scotchlok 2-voudig draad connectors
NIET GEBRUIKEN !!!
SALTO adviseert enkel één kabel per andlezer te
gebruiken.
Min Max Unit
Wandlezer 150 mA
Wandlezer+Keyboard 250 mA
Min Cen. Max Unit
RFID frequency 13.56 Mhz
Bluetooth Smart
frequency 2.4 2.445 2.483 Ghz
%
ºC
ºC
85
+66
+66
35
-25
-35
UnitMax.Min.
Vochtigheid
Temperatuur WRD0J - WRD0GK - WRD0JK
Temperatuur WRD0B - WRD0S - WRD0BK - WRD0SK
%
°C
°F
°C
°F
85
+66
+150
+66
+150
35
-25
-13
-35
-31
Humidity
Temperature WRD0J - WRD0GK - WRD0JK
Temperature WRD0B - WRD0S - WRD0BK - WRD0SK
UnitMax.Min.
Operation conditions Po er Consumption
Note 1
RF characteristics
Note 1: Installer must take this data into
account to dimension the
CU42xx po er supply
Note 2: Not use ith Scotchlok butt connector UY2
SALTO recommends to use one cable per all reader.
Min Max Unit
Reader 150 mA
Reader+Keyboard 250 mA
Min Cen. Max Unit
RFID frequency 13.56 Mhz
Bluetooth Smart
frequency 2.4 2.445 2.483 Ghz
Electrical characteristics

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
224899-ED.3- 24/07/2018
Installation guide
European view
© 2018 SALTO Systems S.L.
Installation example:
Ejemplo de instalación:
Installationsbeispiel:
Exemple d’installation:
Installatievoorbeeld:
Installationsexempel:
Exemple d’installation avec connecteur RJ45 :
Installatie voorbeeld RJ45:
Installationsexempel RJ45:
Installation example with RJ45:
Ejemplo de instalación RJ45:
Innstallationsbeispiel für RJ45:
READER 1
A
B
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Ethernet
10Base-T
100Base-TX
ON
12V DC Input
+
A
B
-
12V DC Output (1A)
Power Input: 12V DC -1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Model: CU42E0
B
A
-
+
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
3M Scotchlok butt connector UY2.
Crimp with cap side down.
Conector 3M Scotchlok butt UY2.
Crimpar con la tapa hacia abajo.
3M Scotchlok butt Einzeladerverbinder UY2.
Mit der Kappe nach unten zusammendrücken.
Connecteur 3M Scotchlok butt UY2.
Crêper avec le capuchon vers le bas.
3M Scotchlok draad connectors - UY2.
Krimp/aanknijpen met het gekleurde deksel naar
beneden.
3M kontakt Scotchlok butt UY2.
Monteras med platta sidan neråt.
TM TMTM
TM TM
TM TM
TM TM
TM TM
TM TM
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
Minimum distance between readers 20in (50cm).
Distancia mínima entre los lectores 20in (50cm).
Mindestabstand zwischen Lesern 20in (50cm).
Distance minimale entre les lecteurs doit être de 20in (50cm).
Minimale afstand tussen de lezers 20in (50cm).
Minsta avstånd mellan läsare 20in (50cm).
E
Eng
D
F
NL
SVE
WRDx0A4xx Card reader
Same pair
Même paire
Mismo par
Gleiches Paar
Hetzelfde paar
Samma par
Only conect to CU42xx
Solo conectar a CU42xx
Nur für Steuereinheit CU42xx
Connecter uniquement CU42xx
Alleen aansluiten aan CU42xx
Ansluts endast till CU42xx
Cable connection
Cableado
Verdrahtung
Câblage
Draadwerk
Ledningar
Verde
Amarillo
Negro
Rojo
Vert
Jaune
Noir
Rouge
Grün
Gelb
Sch arz
Rot
B
A
Green
Yello
Black
Red
+V
Groen
Geel
Z art
Rood
Grön
Gul
Svart
Röd
Eng Esp Fra Deu Ned Sve
READER 1
A
B
12V DC Input
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
+
A
B
-
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Model: CU4200
12V DC Output (1A)
ON
Power Input: 12V DC -1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Optional
Opcional
Optioneel
Optionnelle
Facultatief
Valfritt
SP224861 SP224895
Optional
Opcional
Optioneel
Optionnelle
Facultatief
Valfritt
E
Eng
D
F
NL
SVE
E
Eng
D
F
NL
SVE
Red
Rojo
Rot
Rouge
Rood
Röd
Black
Negro
Schwarz
Noir
Zwart
Svart
E
Eng
D
F
NL
SVE
3/4

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
224899-ED.3- 24/07/2018
Installation guide
European view
© 2018 SALTO Systems S.L.
Eng
E
D
F
NL
SVE
WRDx0A4xx Card reader
Red
Red 5x(50/50x3+off300)
Green
Red
Green 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
High pitched 50/50
High pitched 5x(50/50x3 + off 300)
Lo pitched
Lo pitched
High pitched/Lo pitched 400/200
High pitched
Lo pitched 50/100
Signal Light Time Buzzer Time
(sec) (sec)
Card Rejection
Privacy or emergency status
Standard opening
Standard locking
Open plus office
CLR Button
Reset
SIGNALLING
Rojo
Rojo 5x(50/50x3+ apagado 300)
Verde
Rojo
Verde 400/200
Naranja
Naranja 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Agudo 50/50
Agudo 5x(50/50x3 + apagado 300)
Medio
Grave
Agudo/Grave 400/200
Agudo
Medio 50/100
Señal Luz Tiempo Buzzer Tiempo
(seg) (seg)
Rechazo de Tarjeta
Rechazo por Privacidad o Emergencia
Apertura Normal
Cierre Normal
Abrir y Paso
Botón CLR (3)
Reset
SEÑALÉCTICA
Rot
Rot 5x(50/50x3+ aus300)
Grün
Rot
Grün 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Kont.
450 msg
1
3
0,3
0,2
2,4
Kont.
450 msg
Hoher Ton 50/50
Hoher Ton 5x(50/50x3 + aus 300)
Tiefer Ton
Tiefer Ton
Hoher Ton /Grave 400/200
Hoher Ton
Tiefer Ton 50/100
Signal LED Zeit Buzzer Zeit
(Sek) (Sek)
Karte abgelehnt
Bitte-nicht-stören oder Notschließung
Normale Türöffnung
Verschluss der Tür
Office-Mode aktiviert
CLR Taste gedrückt
Reset
SIGNALE
Rouge
Rouge 5x(50/50x3+ off300)
Vert
Rouge
Vert 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Aigu 50/50
Aigu 5x(50/50x3 + off 300)
Grave
Grave
Aigu/Grave 400/200
Aigu
Grave 50/100
Signal Voyant Temps Buzzer Temps
(sec) (sec)
Carte rejetée
Privacité ou état d’urgence
Ouverture Standard
Verrouillage Standard
Ouverture passage libre
Bouton CLR
Reset
SIGNALISATION
Rood
Rood 5x(50/50x3+ off 300)
Groen
Rood
Groen 400/200
Oransje
Oransje 50/100
1
3
1
0,5
2,4
Cont.
450 msg
1
3
0,3
0,2
2,4
Cont.
450 msg
Hoge tonen 50/50
Hoge tonen 5x(50/50x3 + off 300)
Lage tonen
Lage tonen
Hoge tonen /Grave 400/200
Hoge tonen
Lage tonen 50/100
Signaal LED indicatie Time Geluid Time
(sec) (sec)
Geen rechten
Privacy- of noodsluiting
Standaard opening
Standaard sluiting
Open plus loopstand
CLR knop
Reset
SIGNALERING
Röd
Röd 5x(50/50x3+ av 300)
Grön
Röd
Grön 400/200
Orange
Orange 50/100
1
3
1
0,5
2,4
Konst.
450 msg
1
3
0,3
0,2
2,4
Konst.
450 msg
Hög ton 50/50
Hög ton 5x(50/50x3 + av 300)
Låg ton
Låg ton
Hög ton 400/200
Hög ton
Låg ton 50/100
Händelse Ljussignal Tid Summer Tid
(sek) (sek)
Nekat tillträde
Stör ej eller Nödläge
Standard öppning
Standard stängning
Öppning med kontorsfunktion
CLR Knapp
Nollställning
SIGNALERING
4/4

SALTO SYSTEMS S.L. www.saltosystems.com 1/2 xxxxxx-ED.-14/12/2017
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
PRODUCTS DESCRIPTION
PRODUCT
TECHNOLOGY
SOFTWARE
COMMERCIAL NAME
MODEL
RFID
13.56MHz
Output max. power
BLUETOOTH SMART
2400–2483.5 MHz
Output max. power
CONTROL
BLUETOOTH
MODULE
XS4 Wall Reader 2.0
P1619
WRD0B
+25 dBm
+8 dBm
0151, 0152
0136
WRD0J
+25 dBm
+8 dBm
0153
0136
WRD0S
+25 dBm
+2.8 dBm
0130
-
XS4 Wall Reader 2.0
with Keypad
P1620
WRD0BK
+25 dBm
+8 dBm
0151, 0152
0136
WRD0JK
+25 dBm
+8 dBm
0153
0136
WRD0BF
+25 dBm
+8 dBm
0152
0136
WRD0JF
+25 dBm
+8 dBm
0153
0136
Modular Wall Reader 2.0
P0506
WRM0B
+25 dBm
+8 dBm
0152
0136
WRM0J
+25 dBm
+8 dBm
0153
0136
XS4 Wall Reader 2.0 Panel
P1825
WRDP0B
+25 dBm
+8 dBm
0151, 0152
0136
WRDP0J
+25 dBm
+8 dBm
0153
0136
XS4 Wall Reader 2.0 Mullion
P1826
WRDM0B
+25 dBm
+8 dBm
0151, 0152
0136
WRDM0J
+25 dBm
+8 dBm
0153
0136
EU COMPLIANCE STATEMENT
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain), declares that this access control equipment is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity
at the following Internet address: http://www.saltosystems.com/certificate
ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain) declara que este equipo de control de accesos cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podrá encontrar una copia de la
declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/certificate
FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain) déclare que l’appareil équipement pour le contrôle d’accès est conforme
aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez télécharger une copie de la
déclaration de conformité originale à travers l’adresse suivante: http://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im Übereinstimmung mit den
grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen
Konformitätserklärung finden Sie auf der folgenden Internetseite: http://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van
overeenstemming vinden op het volgende internetadres: http://www.saltosystems.com/certificate
PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva 2014/53/UE (RED) e
2011/65/EU (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet: http://www.saltosystems.com/certificate
ELECTRICAL WARNINGS
Distance between this device and human body must be higher than 20 cm.
MECHANICAL WARNINGS
In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire
door, etc)and that is in good operational conditions. The SALTO product should be treated with care during the installation process to avoidany aggressive contact that may damage
the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise
lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. For
best performance, stainless steel should be cleaned regularly. Notethatwhenthedooris closedwithoutthe lockhaving beenalreadyprogrammed,the lockwillautomaticallylock andcanonlybe
openedwithaPortableProgramingDevice(PPD).Ifyouhavequestionsordoubtsonthis,pleasecontactyourauthorizedSALTOsupplier.

SALTO SYSTEMS S.L. www.saltosystems.com 2/2 xxxxxx-ED.-14/12/2017
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
LEGALWARNINGS
The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect,
malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in
any manner the abovementioned instructions.
SALTO’s liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed
in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that maycauseundesired operation. Changes or modifications not expressly approvedby the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. Ifthis equipment does cause harmful interference to radioor television reception,which can be determined by turningthe equipment off and on, the useris encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consultthe dealer or an experienced radio/TV technician for help.
This product is a radio transmitter and receiver to be used in mobile conditions.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules.
Responsible Party –U.S. Contact Information
Salto Systems Inc. USA
1780 Corporate Drive, Suite 400
Norcross, GA
30093
[e-mail]
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.
This product is a radio transmitter and receiver to be used in mobile conditions.
It complies with FCC RF exposure limits and has been evaluated in compliance with mobile exposure conditions.
The equipment must be installed and operated with minimum distance of 20 cm of the human body.
This product is a radio transmitter and receiver to be used in mobile conditions.
It complies with ISED RF exposure limits and has been evaluated in compliance with mobile exposure conditions.
The equipment must be installed and operated with minimum distance of 20 cm of the human body.
Ce produit est un émetteur et un récepteur radio à utiliser dans des conditions de mobile.
Il est conforme aux limites d'exposition ISED RF et a été évalué en conformité avec les conditions d'exposition mobile.
L'équipement doit être installé et utilisé avec une distance minimale de 20 cm du corps humain.