Salton SB400E Installation guide

INSTRUCTIONS AND WARRANTY
MODEL: SB400E
SALTON 450W STAINLESS STEEL GLASS JUG BLENDER

2
Congratulations on purchasing our Salton 450W Stainless Steel Glass Jug Blender. Each unit is
manufactured to ensure safety and reliability. Before using this appliance for the first time, please
read the instruction manual carefully and keep it for future reference.
FEATURES OF THE SALTON 450W STAINLESS STEEL GLASS JUG BLENDER
450W
1.5L glass jug with mill
Stylish brushed stainless steel and black finish
3 speed with pulse for quick start/ stop control
Detachable stainless steel blade assembly for easy cleaning
Removable filling cap for easy filling
Ideal for smoothies, cocktails, sauces, grinding coffee, herbs and spices, processing bread
into crumbs, ice crushing and so much more
Non-slip rubber feet
Overheat motor protection
For domestic use only
1 year warranty
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed including
the following:
1. Please read the instructions carefully before using this appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains voltage in your
home.
3. Incorrect operation and improper use can damage the appliance and cause injury to the
user.
4. The appliance in intended for household use only. Commercial use invalids the warranty and
the supplier can not be held responsible for injury or damage caused when using the
appliance for any other purpose than that intended.
5. Avoid contact with moving parts. Do not insert hands or fingers into appliance while in use.

3
6. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
7. Children should be supervised to ensure that they do not play with the appliance.
8. Check the power cord and plug regularly for any damage. If the cord or the plug is damaged,
it must be replaced by the manufacturer or a qualified person in order to avoid an electrical
hazard.
9. Do not use the appliance if it has been dropped or damaged in any way. In case of damage,
take the unit in for examination and/or repair by an authorised service agent.
10. To reduce the risk of electric shock, do not immerse or expose the motor assembly, plug or
the power cord to water or any other liquid.
11. Never immerse the unit in water or any other liquid.
12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect
the appliance from the mains. Always unplug the unit when not in use, before cleaning or
when adding or removing parts.
13. The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
14. A short cord is provided to reduce the hazards resulting from becoming entangled in or
tripping over a longer cord.
15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a
position where it can be pulled on inadvertently.
16. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric
burner or in a heated oven.
17. Do not use the appliance on a gas or electric cooking top or over or near an open flame.
18. Use of an extension cord with this appliance is not recommended. However, if it is necessary
to use an extension lead, ensure that the lead is suited to the power consumption of the
appliance to avoid overheating of the extension cord, appliance or plug point. Do not place
the extension cord in a position where it can be pulled on by children or animals or tripped
over.
19. This appliance is not suitable for outdoor use. Do not use this appliance for anything other
than its intended use.
20. Never carry the appliance using the power cord.

4
21. Do not leave this appliance unattended during use. Always unplug when the blender is not in
use or before cleaning.
22. Always operate the appliance on a smooth, even, stable surface. Always ensure that the lid
is in place before operating appliance.
23. Turn the blender on only after the blending unit has been assembled correctly and has been
inserted into the motor block and the lid has been attached. Always wait until the blender has
stopped completely before removing the blending unit from the motor.
24. Keep hands and other utensils out of the blender while the blender is in use, to reduce the
risk of severe injury to persons or damage to the machine.
25. The blade is extremely sharp. To prevent injuries, take special care when cleaning the
appliance and when emptying the glass jug.
26. Ensure that the rotary switch is in the “O” position after each use.
27. When blending hot liquids, allow them to cool to lukewarm before pouring them into the
blending jug. Remove the removable cap while blending warm liquids.
28. Do not operate the appliance without food or liquid in the jug.
29. Before the appliance can be used, the main body as well as any attachments must be
thoroughly checked for any defects.
30. Keep any packaging material well away from children. These materials are a potential source
of danger, e.g. suffocation.
31. Do not operate this appliance by means of an external timer or separate remote control
system.
32. To avoid the danger of fire and/or explosion, do not use this blender to stir paints or solvents.
33. The appliance is designed to process average domestic quantities of food. It can operate
with no interruption for 60 seconds, after which it should be allowed to cool down.
34. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
35. In case of technical problems, switch off the machine and do not attempt to repair it yourself.
Return the appliance to an authorised service facility for examination, adjustment or repair.
Always insist on the use of original spare parts. Failure to comply with the above mentioned
pre-cautions and instructions, could affect the safe operation of this machine.
CAUTION: before removing the glass jug, ensure that the rotary control is in position “0”. This also
applies when fitting the glass jug to the motor. If the control is not in its off position “0”, the motor will
start immediately.

5
PARTS DIAGRAM
1. Removable cap
2. Lid
3. Handle
4. Sealing ring
5. Cutting blade assembly
6. Jug base
7. Motor
8. Rotary switch
9. Glass jug
BEFORE FIRST USE
Before the appliance is used for the first time, the glass jug and lid must be thoroughly cleaned as
described in the section “Cleaning and Maintenance”.

6
ASSEMBLY OF BLENDER
Ensure all parts are thoroughly clean before being used for the first time.
1. Put the rubber sealing ring (4) on the inner edge of the cutting blade assembly (5).
2. Put the cutting blade assembly with the sealing ring into the jug base (6).
3. Mount the glass jug (3) on to the jug base (6) unit and turn the jug base unit in a clockwise
direction until it is fixed.
4. When in use, after putting the ingredients in the glass jug, fix the lid (2) onto the glass jug by
pressing down.
5. Insert the removable cap (1) into the opening of the lid, and turn it in an anticlockwise direction
until it is locked.
6. Make sure that the blender is switched off (Switch in the ‘0’ setting). Place the jug assembly (9)
on to the motor (7) and press down until securely engaged.
OPERATING INSTRUCTIONS
1. Place food and/or liquids into the glass jug.
2. Put the lid on the glass jug and close securely. Place the removable cap into the lid and turn
clockwise to lock
3. Switch the unit ‘on’ using the rotary switch:
‘O’ is off
‘1’ is low, best used for liquids
‘3’ is high, best used for solids and for mixing liquids with solids.
‘P’ is for pulse use, best used for short bursts of blending and for crushing ice. This setting will
automatically move to ‘O’ when released, and will not stay on ‘P’ permanently.
4. Once finished, move the rotary switch to ‘O’ and pull the plug out of the socket.
5. Remove the glass jug from the unit by lifting it. No rotating is required to remove the glass jug.
USEFUL HINTS
1. When blending solid ingredients, it is best to cut them into small pieces before inserting them
into the blender. A diameter of 2-3cm is suggested.

7
2. Blend only small portions of solid ingredients at a time, adding more once each portion is fully
blended.
3. When mixing solid ingredients with liquids, add small amounts of liquid at a time. Use the
opening in the lid to add more liquid.
4. When blending very thick ingredients, use the pulse function to prevent overheating the motor.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable. Do not open or change
any parts by yourself. Please refer to a qualified electrical service department or return to the
supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the speed control is set to “0”.
It is much easier to clean the blender directly after it has been used. Place lukewarm water
into the glass jug and turn the switch to ‘P’ briefly several times. Empty the glass jug,
disassemble it and wash the parts in warm, soapy water, rinse and dry well.
Take extra care when handling the blades, as they are very sharp.
The motor should be wiped with a damp cloth only. Do not let water enter the motor.
All parts except the motor are dishwasher suitable.
Do not use bleach or other abrasive substances or solvents to clean your appliance as it can
damage the finish.
Do not immerse the motor in water or any other liquid, or hold it under a running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.
STORING THE APPLIANCE
Ensure that the unit is switched to the OFF position. Unplug the appliance from the power
outlet.
Clean all the parts as instructed above. Ensure that all parts are dry before storing.
Store the appliance in a clean, dry place.
Never store the appliance while it is still wet or dirty.

8
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly, please
check the following:
You have followed the instructions correctly
That the unit has been wired correctly and that the wall socket is switched on.
That the mains power supply is ON.
That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem
and you need to return the appliance, make sure that:
The unit is packed carefully back into its original packaging.
Proof of purchase is attached.
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service
agent, in order to avoid any hazard. If service becomes necessary within the warranty period, the
appliance should be returned to an approved Home of Living Brands (Pty) Limited service centre.
Servicing outside the warranty period is still available, but will, however, be chargeable.
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other power
sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live

9
PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE
IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED.
W A R R A N T Y
1. Home of Living Brands (Pty) Limited warrants to the original purchaser of this product (“the
customer”) that this product will be free of defects in quality and workmanship which under
normal personal, family or household use and purpose may manifest within a period of 1 (one)
year from the date of purchase (“warranty period”).
2. Where the customer has purchased a product and it breaks, is defective or does not work
properly for the intended purpose, the customer must notify the supplier from whom the
customer bought the product (“the supplier”) thereof within the warranty period. Any claim in
terms of this warranty must be supported by a proof of purchase. If proof of purchase is not
available, then repair, and/or service charges may be payable by the customer to the supplier.
3. The faulty product must be taken to the supplier's service centre to exercise the warranty.
4. The supplier will refund, repair or exchange the product in terms of this warranty subject to
legislative requirements. This warranty shall be valid only where the customer has not broken
the product himself, or used the product for something that it is not supposed to be used for.
The warranty does not include and will not be construed to cover products damaged as a
result of disaster, misuse, tamper, abuse or any unauthorised modification or repair of the
product.
5. This warranty will extend only to the product provided at the date of the purchase and not to
any expendables attached or installed by the customer.
6. If the customer requests that the supplier repairs the product and the product breaks or fails to
work properly within 3 (three) months of the repair and not as a result of misuse, tampering or
modification by or on behalf of the customer, then the supplier may replace the product or pay
a refund to the customer.
7. The customer may be responsible for certain costs where products returned are not in the
original packaging, or if the packaging is damaged. This will be deducted from any refund paid
to the customer.
HOME OF LIVING BRANDS (PTY) LTD
www.homeoflivingbrands.com
011 490-9600 (Jhb)
031 792-6000 (Dbn)
021 552-5161 (CT)
www.salton.co.za
www.facebook.com/SaltonAppliances