Samsung SCH-A725 User manual

* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in China
Code No.: GH68-XXXXX
English. 05/2004. Rev.1.0
ELECTRONIC
S
PORTABLE CELLULAR
TELEPHONE
SCH-A725
User’s Manual
Please read this manual before operating your
phone, and keep it for future reference.

3
Table of contents
Important Safety Precautions.................................6
Unpacking ..............................................................8
Your phone.............................................................9
Phone layout............................................................. 9
Display................................................................... 12
Backlight ................................................................ 15
Service light............................................................ 15
Getting started .....................................................16
Using the battery..................................................... 16
Switching on or off the phone.................................... 21
Using the soft keys .................................................. 23
Your phone’s modes................................................. 24
Call functions........................................................26
Making a call........................................................... 26
Ending a call ........................................................... 27
Emergency dialing ................................................... 27
Using the recent call logs.......................................... 28
Redialing the last number ......................................... 28
Making a call from contacts....................................... 29
Prepend dialing ....................................................... 29
Speed dialing .......................................................... 30
Four-digit dialing ..................................................... 31
Pause dialing........................................................... 32
Adjusting the volume ............................................... 35
Answering a call ...................................................... 35
Silencing an incoming call......................................... 36
Rejecting a call........................................................ 36
Viewing missed calls ................................................ 37
Options during a call ................................................ 37
Using caller ID......................................................... 38
Call forwarding........................................................ 38
Call waiting............................................................. 39
Three-way calling .................................................... 39
Entering text ........................................................41
Changing the text input mode ................................... 42

Table of contents
4
Using the T9 (English) mode ..................................... 43
Using the alphabet mode.......................................... 44
Using the symbol mode ............................................ 47
Using the number mode ........................................... 47
Using the menus...................................................48
Accessing a menu function by scrolling ....................... 48
Using shortcuts ....................................................... 49
List of Menu Functions.............................................. 49
Contacts ...............................................................53
Find (Menu 1-1) ....................................................... 53
Add new entry
(Menu 1-2) ......................................... 54
Group setting
(Menu 1-3) .......................................... 57
My phone #
(Menu 1-4) ............................................ 58
Memory
(Menu 1-5) .................................................. 58
Calls .....................................................................59
Outgoing (Menu 2-1) ................................................. 59
Incoming
(Menu 2-2) ................................................ 60
Missed
(Menu 2-3) .................................................... 60
Erase history
(Menu 2-4) ........................................... 61
Air time
(Menu 2-5) .................................................. 61
Torpedo SMS.........................................................62
New message (Menu 3-1) .......................................... 62
Inbox
(Menu 3-2) ..................................................... 64
Sent
(Menu 3-3) ....................................................... 65
Draft
(Menu 3-4) ...................................................... 66
Saved
(Menu 3-5) ..................................................... 67
Web alert
(Menu 3-6) ................................................ 67
Erase messages
(Menu 3-7) ....................................... 68
Message setting
(Menu 3-8) ....................................... 68
Other functions.....................................................71
Planner (Menu 4-1) ................................................... 71
Display
(Menu 4-2) ................................................... 81
Sounds
(Menu 4-3) ................................................... 85
Games
(Menu 4-4) .................................................... 89
Setup
(Menu 4-5) ..................................................... 90
WAP....................................................................101
About the WAP browser.......................................... 101
Table of contents
5
Get in WAP (Menu 5-1) ............................................ 102
Prompt
(Menu 5-2) ................................................. 106
Downloads..........................................................107
Voice mail...........................................................109
Voice mail (Menu 7-1) ............................................. 109
Voice mail #
(Menu 7-2) .......................................... 109
Erase message
(Menu 7-3) ...................................... 109
Tones & images ..................................................110
Display (Menu 8-1) ................................................. 110
Sounds
(Menu 8-2) ................................................. 110
Voice portal ........................................................111
Messaging ..........................................................112
Torpedo SMS (Menu 0-1) ........................................ 112
Voice mail
(Menu 0-2) ............................................ 112
Chat
(Menu 0-3) .................................................... 113
E-mail
(Menu 0-4) ................................................. 113
Voice command ..................................................114
Health and safety information ............................115
Road safety .......................................................... 119
Operating environment........................................... 119
Electronic devices .................................................. 120
Potentially explosive environment ............................ 122
Emergency calls .................................................... 122
Other important safety information .......................... 124
Care and maintenance............................................ 125
Acknowledging special precautions and the FCC and indus-
try canada notice................................................... 126
Appendix A:CERTIFICATION INFORMATION (SAR)...... 128
Glossary .............................................................130

6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always with off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Important Safety Precautions
7
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press . You must deactivate any
unnecessary features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorized accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and safety information” on page xx.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.

8
Unpacking
Your package contains the following items. The
illustrations below may look different from your
phone and accessories:
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
Handset Battery
Travel adapter Hand strap
Battery charger User’s manual
Ear-microphone
• Ear-microphone • Travel adapter
• Standard and Extended
batteries • Cigarette lighter adapter
• Hands-free car kit • Data cable
• PC link data cable • Hand strap
9
Your phone
Phone layout
The following illustrations shows the main
elements of your phone.
With the phone open
Earpiece
Display
Headset jack
Microphone
Soft key
(left)
Send key
Soft key (right)
Power on/off/
menu exit key
Alphanumeric
keys
Special
function keys
Cancel/
Clear key
Navigation
(Up/Down/
Left/Right)
keys
Volume/menu
browse keys

Your phone
10
With the phone closed
Key (s) Description
(soft keys)
Performs the functions indicated by the
text above them, on the bottom line of
the display.
In Menu mode, scrolls through menu
options.
In Standby mode; quickly enters the
following menu respectively:
• :
Downloads
• : Scheduler
• : Messaging
• : Torpedo SMS
In Menu mode, selects the current
menu or option or confirms your input.
When there are options available,
pressing this key selects the first option
immediately.
Antenna
External
display
Service light
Your phone
11
Makes or answers a call.
In Standby mode, retrieves the most
recent numbers dialed, received or
missed. Redials the last number when
pressed twice.
Ends a call. Also switches the phone on
and off when pressed and held.
In Menu mode, cancels your input and
returns to Standby mode.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Enters numbers, letters and some
special characters.
In Standby mode, initiate the Voice
command feature when pressed and
held.
In the text entry mode, changes the
case of letters.
In Standby mode, quickly enters or
exits Silent mode when pressed and
held.
In the text entry mode, inserts a space.
Key (s) Description (continued)

Your phone
12
Display
Layout
The display has two areas; an upper line of
various icons and a lower text and graphic area.
(on the left side of the phone)
During a call, adjust the voice volume.
In Standby mode, adjusts the key tone
volume.
Key (s) Description (continued)
Icons
Text and
graphic area
Menu Contacts
Soft key function
indicators
Your phone
13
Icons
Icon Description
Signal strength : Shows the received
signal strength. The greater the number
of bars, the better the signal.
Service : Appears when a call is in
progress.
No service : Appears when you are
outside a service area. When it displays,
you cannot make or receive calls. Wait a
little while for a better signal or move into
an open area to regain service.
New text message : Appears when a
new Text message is received.
New voice mail message : Appears
when a new Voice mail message is
received.
Alarm mode : Appears when you set an
alarm to ring at a specified time.
Roaming : Appears when you are out of
your home area and have logged onto a
different network; for example, when
traveling in other countries.
Ringer on : Appears when you set the
ringer volume for calls to one from
Level
1
to Level 8 or to 1-Beep .
Ringer off : Appears when the ringer
volume is turned off.

Your phone
14
External display
Your phone has an external display on the phone.
When you close the phone, it turns on and
indicates when you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by turning its
backlight and showing the corresponding icon on
it.
When the display is off, press and hold one of the
Volume keys on the left side of the phone to turn
the display on.
Vibration mode : Appears when the
ringer volume for calls is set to
Vibrate or
High+vib or when your phone is in Silent
mode.
Digital mode : Indicates when the phone
is logged onto a digital network.
Analog mode : Indicates when the phone
is logged onto an analog network.
1x mode : Indicates when the phone is in
the 1x mode.
Battery status : Shows the level of your
battery. The more bars you see, the more
power you have remaining.
Icon Description (continued)
Your phone
15
Backlight
The backlight illuminates the display and keypad.
When you press any key or open the phone, the
backlight illuminates. It turns off if no key is
pressed within a given period of time, depending
on the
Backlight ( Menu 4-2-4 ) menu set in the
Display menu. The backlight remains on at all
times when the phone is connected to an optional
car kit.
To specify the length of time for which the
backlight is active, set the
Backlight menu. See
page xx for further details.
Note : In Standby mode or Talk mode, the display
automatically turns off after some time,
depending on your setting in the Backlight
menu to conserve your battery power. Press
any key to turn the display on.
Service light
The service light is at the outline of the navigation
key. It flashes to indicate incoming call or
message. Also, the service light flashes for a few
seconds when you turn on the phone.
To make the service light turns on, set the
Service LED menu option ( Menu 4-2-9 ); see
page xx for further details.

16
Getting started
Using the battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and
chargers. Ask your local Samsung dealer for
further details.
Note : You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
180 minutes for a standard battery.
Installing the battery
1. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
Getting started
17
2. Press the battery until it clicks into place.
Make sure that the battery is properly installed
before switching the phone on.
3. To remove the battery. To do so:
➀ Slide the battery lock towards the top of the
phone.
➁ Lift away the battery, as shown.
Charging the battery
A travel adapter and a battery charger are
provided for charging your batteries.
Using the travel adapter
The travel adapter allows you to use the phone
while the battery is charging, but this will cause
the battery to charge more slowly.
➀
➁

Getting started
18
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
jack at the bottom of the phone.
Make sure that the arrow on the connector is
facing toward the front of the phone.
2. Plug the adapter into a standard AC wall outlet.
The battery strength icon on the display shows
that the battery is charging.
3. When charging is finished, unplug the adapter
from both the power outlet and the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
Note : Do not remove the battery from the phone
without unplugging the adapter while it is
charging. Otherwise, the phone may be
damaged.
➀
➀
➁
Getting started
19
Using the battery charger
Using the battery charger, you can charge the
battery alone.
1. Insert the battery into the battery charger
ensuring that the terminals on the battery are
in contact with those on the charger. Push the
battery down until it clicks into place.
2. Plug the connector of the travel adapter into
the jack at the bottom of the charger.
The small light, LED, on the charger turns on.

Getting started
20
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger indicates the charging
progress by the following colors:
• Red: the battery is being charged.
• Green: the battery is fully charged.
• Orange: the battery is not correctly plugged
in or is operating at a too high or too low
temperature.
4. When charging is finished, unplug the adapter
both from the power outlet and from the
charger.
5. To remove the battery, push and hold the
battery catch and lift away the battery.
➀
➀
➁
➀
➁
Getting started
21
Low battery indicator
You can easily tell if your battery needs to be
recharged by checking the Battery Status icon
( ) at the upper-right corner of your phone’s
display. The presence of all three bars indicates a
full charge, two bars indicates a smaller charge,
and one bar indicates an even smaller charge.
When the battery charge level becomes low, the
battery sensor blinks an empty Battery Status
icon ( ) and sounds a warning tone. If the
battery level becomes too low, the phone
automatically turns off. When this happens, you
lose whatever you are doing and your phone call
cuts off. Watch the Battery Status icon and make
sure that your battery is adequately charged.
Switching on or off the phone
1. Open the phone.
2. Press and hold until the power-on image
displays to switch the phone on.
3. If the phone asks for a Personal Identification
Number (PIN), enter the PIN code supplied
with the UIM card. For further details on the
PIN code, see page xx.
The service light on the phone flashes and an
alert sounds. When the system locates
services, the greeting message displays along
with the date and time. You can now place and
receive calls.

Getting started
22
If the phone is out of service, the No Service
icon ( ) appears on the display. In this case,
you cannot make and receive calls. You can try
again later when service is available.
Note : To change the language, use the Language
menu (
Menu 4-5-6 ). For further details, see
page xx.
4. When you wish to switch the phone off, hold
down more than two seconds until the
power-off image displays.
WARNING!
Do not switch the phone on when mobile phone
use is prohibited or when it may cause
interference or danger.
Note : As with any other radio-transmitting device,
do not touch the antenna unnecessarily when
the phone is switched on. Contact with the
antenna affects the call quality and may cause
the phone to operate at a higher power level
than otherwise needed.
Getting started
23
Using the soft keys
Your phone offers a set of functions that allows
you to customize it. These functions are arranged
in menus and submenus, accessed using the two
soft keys, and . Each menu and submenu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
current function you are using; the labels on the
bottom line of the display just above each key
indicates its current role.
Example:
9:43A Tue May 04
Menu Contacts
Press the left soft
key to access Menu
mode.
Press the right soft
key to access the
Contacts menu.

Getting started
24
Your phone’s modes
Standby mode
Standby is the most basic state of your phone.
The phone goes into Standby mode after you turn
it on or whenever you briefly press . When
your phone is in Standby mode, you will typically
see the greeting message and the current date
and time. If you enter a phone number, you can
press to dial it or press the
Save soft key to
save it in the internal Contacts.
Press at any time to return to Standby Mode.
Be careful; if you are on a call when you press
, the call disconnects and the phone returns to
Standby mode.
Talk mode
You can place and answer calls only when your
phone is turned on. During a call, the phone is in
the talk mode. While you are in the talk mode,
pressing the
Menu soft key gives you a list of
options. See page xx for details.
Power save mode
Your phone comes with a Power Save feature that
is automatically activated if your phone is unable
to find a signal after 10 minutes of searching.
While this feature is active, the phone’s battery
charge is conserved. The phone automatically
rechecks for a signal periodically. To manually
force the phone to recheck for a signal, press any
key.
Getting started
25
Lock mode
When you lock your phone using the Lock phone
menu (
Menu 4-5-*-1 ) in the Security menu,
you cannot use the phone. In the lock mode, you
can receive messages and calls, but you cannot
place an outgoing call until you unlock the phone.
To unlock the phone, you need to enter the lock
code.
For details about locking and unlocking your
phone, see page xx.
Silent mode
Silent mode disables all of the sounds on the
phone. This feature is best used in situations
where the phone might disturb others, such as in
a meeting, at a library or in a theater. You can
switch your phone to the silent mode with one
touch of a key.
In Standby mode, press and hold until
“Enter! Silent mode” and the Vibration indicator
()display.
To exit and reactivate the previous sound settings,
press and hold again until “Exit! Silent
mode” appears. The Vibration indicator no longer
displays.
Note : When you turn the phone off, the silent mode
is automatically deactivated.

26
Call functions
Making a call
To make a call:
1. In Standby mode, enter the area code, and
phone number.
While entering a phone number, press the
Pause soft key to insert a hard pause. For
more information on pause dialing, see page
xx.
2. Press . The phone places the call to the
entered phone number.
Note : If you have set the time interval for automatic
redialing in the
Auto retry menu ( Menu 4-
5-5
), the phone automatically retries to make
the call when no one answers or the line is
busy. See page xx for further details.
Correcting the number
To clear Press the
the last digit
displayed .
the whole display for more than one
second.
Call functions
27
Ending a call
When you want to finish your call, press the
key.
The call time, the length of the call, displays along
with the phone number of the called person. If the
number is stored in your Phonebook, the name
displays. If there is no match, you can press the
Save soft key and store the number in
Phonebook. For further details about storing the
number in Phonebook, see page xx.
Alternatively, simply close the phone to end a call.
Emergency dialing
You can place emergency calls from your
emergency number list even if your phone is
locked or all of the outgoing calls are restricted.
For further details about emergency numbers, see
page xx.

Call functions
28
Using the recent call logs
The phone stores up to 30 of the calls dialed,
received, or missed chronologically. The last call is
saved in the first position.
To recall any of these numbers:
1. If there are any characters on the display,
return to Standby mode by pressing .
2. Press . The list of recent calls displays.
• : Outgoing calls
• : Incoming calls
• : Missed calls
3. Press the Navigation keys, or the Volume keys
on the left side of the phone to scan through
the list until the number you want highlights.
Press to dial the highlighted number.
Redialing the last number
To redial the last call you made, press twice
quickly or hold .
Your phone stores the last 10 numbers of the
dialed calls. To recall any of these numbers:
1. In Standby mode, press . The list of the
recent outgoing calls displays.
2. Press or until you find the name or
number you want.
3. Press to dial the number displayed.
Call functions
29
Making a call from contacts
You can store the phone numbers you called
regularly in the phone’s memory, which is called
“Contacts”. You then simply recall the number to
dial.
For further details about the Contacts feature, see
page xx.
Prepend dialing
The prepend option lets you add digits, such as
area codes and network feature activation codes,
to a phone number that is in your call logs or
Contacts.
To prepend a phone number stored in your phone:
1. Access call logs by pressing or Contacts
entries by referring to page xx.
2. Scroll to the number you want to dial.
3. When the phone number you want to dial
highlights, press the
OK soft key.
The display shows the details of the number.
4. Press the
Menu soft key to access the menu
pop-up list.
5. Press the
3 key to select the Prepend option.
6. Enter the area code or feature code.
7. Press to dial the number.

Call functions
30
Speed dialing
Once you have stored phone numbers in the
Contacts memory, you can dial them easily with
the few presses of the keys.
Note : When several numbers are saved in one name
entry, the first number you entered is
automatically specified as a speed dial
number. To change the speed dial number, use
Speed dial of the Contacts options; see page
xx.
One-touch dial
Memory locations 001 through 009 are special
one-touch locations. You can dial the phone
numbers stored in the Contacts memory from 001
through 009 simply by pressing one key.
Press and hold the third digit of the memory
location.
For example: Location no. 009
Press and hold.
The number (and name) stored displays, and then
dialed.
Two-touch dial
Memory locations 010 through 099 are special
two-touch locations.
Press the second digit briefly, then hold down the
third digit of the memory location.
Call functions
31
For example: Location no. 023
Press briefly and hold down
.
The number (and name) stored displays, and then
dialed.
Three-touch dial
Memory locations 100 through 500 are special
three-touch locations.
Press the first two digits briefly, then hold down
the third digit of the memory location.
For example: Location no. 123
Press and briefly, then
hold down .
The number (and name) stored displays, and then
dialed.
Four-digit dialing
You can quickly dial a phone number in Contacts
by entering its last four consecutive digits.
1. Enter the last four digits of the phone number
you want to dial.
2. Press the
Menu soft key and select the 4-digit
dial
option. The phone displays the phone
number matching the four digits.
If the phone found more than one number that
contains those four digits, it displays the first
number. Scroll through the number using
or to select a number.
3. Press to dial the number.

Call functions
32
Pause dialing
When you call an automated system, like a
banking service, you are often required to enter a
password or account number. Instead of manually
entering the numbers each time, you can store
the numbers in your Contacts, separated by
special characters which are called pauses.
There are two kinds of pauses that can be entered
on your phone:
• Hard pause: A hard pause stops the dialing
sequence until you press .
• 2-second pause: A two second pause stops the
dialing sequence for two seconds and then
automatically sends the remaining digits.
Note : Multiple two second pauses can be entered to
extend the length of a pause. Keep in mind
that pauses count as digits towards the 32
digit dialing maximum.
Storing pauses in a contacts entry
To store a number in your Contacts that contains
pauses:
1. Enter the phone number you want to store,
such as the bank’s teleservice phone number.
2. Press the
Menu soft key to access the options.
3. Select the required pause type and press the
OK key.
• Press for
Hard pause . The letter “P”
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
Call functions
33
• Press for 2sec pause . The letter “T”
displays, meaning that a “Timed” pause will
occur at that point in the dialing sequence.
4. Enter the digits that need to follow the pause,
such as your account number.
5. Repeat steps 2 through 4 to add more pauses
and numbers, if necessary.
6. Store the number in your Contacts as you
normally would by pressing or the
Save
soft key and following from step 2 on page xx.
Pause dialing from a stored contacts
entry
1. Dial the number of the service from Contacts.
2. If you stored the number using a hard
pause(s), wait for the appropriate prompt from
the number you are calling. When prompted,
press to send the DTMF (Dual tone multi-
frequency) number that follows your pause.
If you stored the number using a two second
pause(s), your phone transmits the number
that follows the “T” pause two seconds after
the connection.
3. “Sending DTMF” flashes on the display and the
transmitted tone sounds.
4. Repeat from step 2, if necessary.

Call functions
34
Manual pause dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you
want to call, such as a bank’s teleservice phone
number.
2. Press the
Menu soft key to access the options.
3. Select the required pause type and press .
• Press for
Hard pause . The letter “P”
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press for
2sec pause . The letter “T”
displays, meaning that a “Timed” pause will
occur at that point in the dialing sequence.
4. Enter the number to be sent after the pause
and then press to dial the first number.
5. For a hard pause, press again at the
prompt to send the additional number after
connecting.
If you enter the number using a 2-second
pause(s), the phone sends the number that
follows the pause two seconds after the
connection.
Call functions
35
Adjusting the volume
During a call, if you want to adjust the voice
volume, use the Volume keys on the left side of
the phone.
Press the key to increase the volume level and
the key to decrease the level. The image on the
display shows all eight levels; the more bars you
see, the higher the level is.
In Standby mode, you can also adjust the keypad
tone volume using these keys.
Answering a call
When somebody calls you, the phone alerts you
by ringing and blinking the service light.
If the caller can be identified, the caller’s phone
number, or name if available in your Contacts,
displays.

Call functions
36
There are two ways to answer a call depending on
your setting in the
Call answer menu ( Menu 4-
5-4
):
To end the call, close the phone or press .
Notes :
• You can answer a call while using Contacts or menu
functions. The current operation stops.
• If you cannot answer incoming calls, you can set
the phone to answer the call by playing a greeting
message and record callers’ messages. For further
details, see page xx.
Silencing an incoming call
You can silence the ringer when a call comes.
Press one of the Volume keys when the phone is
closed. If it is open, press .
Rejecting a call
If you press , when a call is received, the
phone stops ringing or vibrating. You can still
answer the call by pressing the key.
If you select To answer the call,
Any key press any key, except the
and the volume keys.
SEND key press .
Call functions
37
Viewing missed calls
If you fail to answer a call for any reason, the
phone indicates the missed call by displaying a
text notification on the screen. Additionally, if
caller information is available, a Missed entry is
created.
Press the key to access the recent calls list, or
to clear the message and return to Standby
mode.
To view missed calls, access the
Missed menu
(
Menu 2-3 ). For details, see page xx.
Options during a call
Your phone provides a number of functions that
you can use during a call. As many of these
options are network services, you may not be able
to use all of them at all times.
Press the
Menu soft key during a call to access
the following options:
Contacts : allows you to access the Contacts
menu. See page xx for details.
Mute/quit : allows you to switch your phone’s
microphone off, so that the other person cannot
hear you.
Example: You wish to say something to another
person in the room but do not want the other
person to hear you.
Silent/quit : allows you to switch the key tones
off or on. By switching the tones off, you can press
the keys without hearing annoying key tones
during a call.

Call functions
38
Send tel # : send your telephone number to the
other party.
Calls : allows you to access the Calls menu. For
details, see page xx.
Messages : allows you to use the Messages
menu. For details, see page xx.
Planner : allows you to access the Planner menu.
For details, see page xx.
Voice privacy : allows you to access the Voice
privacy
, see page xx.
Using caller ID
This feature tells you who is calling you by
displaying the caller’s number when the phone
rings. If the name and number are stored in your
Contacts, the corresponding name is also
displayed. If you call someone who has this
feature, your phone number displays on her/his
phone.
Note : Contact your service provider to set up the
Caller Line Identification service.
Call forwarding
This network feature allows you to forward
incoming calls to another phone number, even
while your phone is turned off. Activating Call
forwarding does not affect outgoing calls made
from your phone.
Note : Contact your service provider to activate Call
forwarding.
Call functions
39
Call waiting
Call waiting lets you receive a second call during a
conversation. Your phone notifies you of a waiting
call by beeping and displaying “Call waiting.”
Your network provides you with the option of
turning the Call waiting feature on and off, if you
have subscribed to the service. Call waiting is on
by default in the phone. If you choose to have a
undisturbed conversation, simply turn off the
feature for the current call.
Note : Contact your service provider to activate the
Call waiting service.
To answer a waiting call during a call:
1. When you hear a beep telling that you have a
waiting call, press and key. The phone
connects the calling person and places the
current call on hold.
2. Press again to switch between the two
calls.
Note : If you do not respond to a Call waiting
notification, the phone will forward the call to
voice mail server or another number that you
have set up. Contact your service provider for
more information.
Three-way calling
This feature enables you to conduct conference
calls with two separate people at the same time.
The phone records each participant into the
Outgoing calls log. Also, You are billed call time for
each outgoing call separately.