Samsung OH46B User manual

USER MANUAL
OH46B
The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the
user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user
manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of contents
Before Using the Product
Safety Precautions 6
Safety symbols 6
Electricity and Safety 7
Installation 8
Operation 9
Cleaning 11
Storage 11
Preparations
Checking the Components 12
Components 12
Parts 13
Parts 13
Reverse Side 14
Remote Control 15
Before Installing the Product (Installation
Guide) 17
Tilting Angle and Rotation 17
Ventilation 17
Installing the Wall Mount 19
Installing the Wall Mount Kit 19
Wall Mount Kit Specifications 19
2
Using MDC
MDC Programme Installation/Uninstallation 42
Installation 42
Uninstallation 42
Connecting to MDC 43
Using MDC via RS-232C (serial data
communications standards) 43
Using MDC via Ethernet 43
Player feature
Player 45
Viewing content 45
When content is running 46
Available menu 46
File Formats Compatible with Player 47
Schedule 51
Clone Product 52
ID Settings 53
Device ID 53
Device ID Auto Set 53
PC Connection Cable 53
Remote Control (RS232C) 20
Cable Connection 20
Connection 23
Control Codes 24
Connecting and Using a Source Device
Before Connecting 32
Pre-connection Checkpoints 32
Before connecting cables 33
Connecting to a PC 34
Connection Using an HDMI-DVI Cable 34
Connection Using an HDMI Cable 34
Connecting to a Video Device 35
Using an HDMI cable or HDMI to DVI Cable (up
to 1080p) 35
Connection Using an HDMI-DVI Cable 35
Connection Using an HDMI Cable 35
Connecting the HDBase-T 36
Connecting to an Audio System 37
Connecting the LAN Cable 37
Changing the Input source 38
Source 38
Web Browser 39
Screen Mirroring 41
Samsung Workspace 41

Table of contents
3
OnScreen Display
Display Orientation 69
Onscreen Menu Orientation 69
Source Content Orientation 69
Aspect Ratio 69
Screen Protection 70
Auto Protection Time 70
Screen Burn Protection 70
Message Display 71
Source Info 71
No Signal Message 71
MDC Message 71
Download Status Message 71
Language 72
Reset OnScreen Display 72
Advanced Settings 61
Picture Enhancer 61
Colour 61
Tint (G/R) 61
White Balance 62
Gamma 62
Contrast Enhancer 62
Black Tone 62
Flesh Tone 63
RGB Only Mode 63
Colour Space Settings 63
Input Signal Plus 63
Motion Lighting 63
Picture Options 64
Colour Tone 64
Digital Clean View 64
HDMI Black Level 64
Film Mode 64
Auto Motion Plus Settings 64
Local Dimming 65
Dynamic Peaking 65
Apply Picture Settings 66
Picture Size Settings 67
Picture Size 67
Fit to screen 67
Zoom and Position 67
Reset Picture 68
Video Wall 54
Video Wall 54
Horizontal x Vertical 54
Screen Position 55
Format 55
Network Status 55
On/Off Timer 56
On Timer 56
Off Timer 57
Holiday Management 57
Ticker 57
URL Launcher 58
URL Launcher Settings 58
Screen Adjustment
Backlight / Brightness / Contrast / Sharpness 59
Colour Temperature 60

Table of contents
4
Fan Settings 85
Fan Control 85
Fan Speed Setting 85
Outdoor Mode 85
Play via 86
Change PIN 86
Security 87
Safety Lock On 87
Screen Monitoring Lock 87
USB Auto Play Lock 88
Remote Management 88
Secured Protocol 88
Server Security Status 88
Network Lock 88
USB Lock 88
General 89
Smart Security 89
Anynet+ (HDMI-CEC)89
HDMI Hot Plug 91
Custom Logo 91
Game Mode 92
Empty Storage 92
Reset System 92
Start Setup 78
Time 79
Clock Set 79
NTP Settings 79
DST 79
Power On Delay 79
Auto Source Switching 80
Auto Source Switching 80
Primary Source Recovery 80
Primary Source 80
Secondary Source 80
Default Input 80
Power Control 81
Auto Power On 81
Max. Power Saving 81
Standby Control 81
Remote Configuration 82
Power Button 82
Eco Solution 83
Energy Saving Mode 83
Eco Sensor 83
Screen Lamp Schedule 84
No Signal Power Off 84
Auto Power Off 84
Network
Network Status 73
Open Network Settings 73
Network Settings (Wired) 74
Server Network Settings 76
Connect to server 76
MagicInfo Mode 76
Server Access 76
FTP Mode 76
Proxy server 76
Device Name 76
System
Accessibility 77
Voice Guide Settings 77
High Contrast 78
Enlarge 78

Table of contents
5
Specifications
General 100
Preset Timing Modes 102
Appendix
Responsibility for the Pay Service (Cost to
Customers) 104
Not a product defect 104
A Product damage caused by customer's fault 104
Others 104
Prevention of Afterimage Burn-in 105
What is afterimage burn-in? 105
Recommended prevention practices 105
Licence 106
Terminology 107
Support
Software Update 93
Update Now 93
Updating via USB Device 93
Contact Samsung 93
Terms & Conditions 93
Reset All 93
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre 94
Testing the Product 94
Checking the Resolution and Frequency 94
Check the followings. 95
Q & A 99

6
Before Using the Product
Chapter 01
Safety Precautions
The following safety instructions are to ensure your personal safety and prevent property damage.
Please read the following to ensure the proper use of the product.
Safety symbols
Symbol Name Meaning
Warning A serious or fatal injury may result if instructions are not followed.
Caution Personal injury or damage to properties may result if instructions are not
followed.
Prohibition Do NOT attempt.
Instruction Follow directions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE
NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
AC voltage: Rated voltage marked with
this symbol is AC voltage.
This symbol indicates that this
product has included important
literature concerning operation and
maintenance.
DC voltage: Rated voltage marked with
this symbol is DC voltage.
Class II product: This symbol indicates
that a safety connection to electrical
earth (ground) is not required. If this
symbol is not present on a product
with a mains lead, the product
MUST have a reliable connection to
protective earth (ground).
Caution. Consult instructions for use:
This symbol instructs the user to
consult the user manual for further
safety related information.

7
Electricity and Safety
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not use multiple products with a single power socket.
Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unsecure connection may cause a fire.
Connect the power plug to a grounded power socket (type 1 insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
A fire may result.
Caution
Do not disconnect the power cord while the product is being used.
The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the power cord with other
products.
A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
The power cord must be disconnected to cut off power to the product when an issue occurs.
Note that the product is not completely powered down by using only the power button on the
remote.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.

8
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
A fire may result.
Have a technician install the wall-mount hanger.
Installation by an unqualified person can result in an injury.
Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
An increased internal temperature may cause a fire.
When installing the product, keep it at a distance from the wall so that it is well ventilated.
Refer to the Outdoor Installation Guide. (http://displaysolutions.samsung.com)
An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
The product may fall and become damaged and/or cause an injury.
Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product within the reach of young children.
The product may fall and injure children.
As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen
or near a kitchen counter.
Precautions during installation and storage
After opening the cover, install the product within 1 hour under humidity of 60% or below. (P. 33)
Keep the predefined humidity while opening the cover or assembling the housing (e.g. connection of
external device, F/W update).
During operation and storage of the product, be sure to attach the cover.
Caution
Do not drop the product while moving.
Product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the
product is not protruding.
The product may fall and become damaged and/or cause an injury.
Install the product only on cabinets or shelves of the right size.
Set down the product gently.
Product failure or personal injury may result.
If the product is installed in an unusual location, the surrounding environment may cause a serious
quality problem. Therefore, be sure to contact Samsung Customer Service Centre before installation.
Places where many fine dusts are generated, places where chemicals are used, places with too
high or low temperatures, places with a lot of moisture orwater, transportation equipment such as
vehicles, airports and stations used continuously for a long time, and more.

9
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
A fire or electric shock may result.
Contact Samsung Customer Service Centre for repairs.
If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Centre.
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
Children may become injured or seriously harmed.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
Do not drop objects on the product or apply impact.
A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Product failure, an electric shock or fire may result from a damaged cable.
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
An increased internal temperature may cause a fire.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches,
etc) into the product (via the vent or input/output ports, etc).
Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Centre.
Product failure, an electric shock or fire may result.
Do not block the vent on the product. The product may not function properly due to potential
overheating.
Do not attempt to insert your fingers or objects into the vents.
Product failure or personal injury may result.

10
Caution
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
Activate power-saving mode or a moving-picture screen saver if you will not be using the product for
an extended period of time.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended
period of time (vacation, etc).
Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
The product may fall and become damaged or cause an injury.
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended period of time as it will
become hot.
Store small accessories out of the reach of children.
Exercise caution when adjusting the product angle or stand height.
Your hand or finger may get stuck and injured.
Tilting the product at an excessive angle may cause the product to fall and an injury may result.
Do not place heavy objects on the product.
Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed from the remote control.
Place the battery in a location that children or infants cannot reach.
If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to
leakage of the internal liquid.
Use only the specified standardised batteries, and do not use a new battery and a used battery at the
same time.
Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage
of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling
purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
The customer can return used or rechargeable batteries to a nearby public recycling centre or to a
store selling the same type of the battery or rechargeable battery.

11
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3 Use water and a dry cloth to clean the protection glass.
Wipe with a clean wet cloth.
To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner.
Use a brush to remove any debris from the inlet and outlet opening.
To remove tough stains, wipe using a cloth with a small amount of ethanol based cleaner.
If washing with water, keep the pressure below 0.5 bar.
4 Connect the power cord to the product when cleaning is finished.
5 Power on the product and computer.
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white-
coloured stains on the product.
Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be charged).

12
– Contact the vendor where you
purchased the product if any
components are missing.
– The pictures may look different from
the actual components.
– A stand is not provided with the
product. To install a stand, you can
purchase one separately.
Checking the Components
Components
QUICK SETUP GUIDE Warranty card
(Not available in some locations) Regulatory guide Power cord
+
+
-
-
Batteries (AAA x 2)
(Not available in some locations) Remote Control
Preparations
Chapter 02

13
Parts
Parts
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER
Power LED / Remote sensor
Parts Description
Remote sensor Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.
Store used batteries out of reach of children and recycle.
Do not use a new and used battery together. Replace both batteries at the same time.
Remove batteries when the remote control is not to be used for an extended period of time.

14
Reverse Side
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
RS232C
IN
OUT
AUDIO
OUT RJ45
(LAN OUT)
HDBT
(LAN IN) HDMI IN 1 HDMI IN 2
USB
(5V 0.5A)
Port Description
RS232C IN Connects to MDC using an RS232C cable.
RS232C OUT
AUDIO OUT Outputs sound to an audio device via an audio cable.
USB (5V 0.5A) Connect to a USB memory device.
RJ45 (LAN OUT) - Wired LAN connection port used to connect an external device such as a laptop to connect to the Internet.
- Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)
HDBT (LAN IN) - Sends the HDMI signal to a connected LAN cable using an HDBaseT transmitter.
- Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)
HDMI IN 1, HDMI IN 2 Connects to a source device using a HDMI cable or HDMI-DVI cable.

15
– Remote control button functions may
differ for different products.
– Remove batteries when the remote
control is not to be used for an
extended period of time.
Remote Control
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
A button without a description in the image below is not supported on the product.
HOME
MENU
POWER
OFF
VOL
MagicInfo
Player I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
CH
DEL-/-- CH LIST
Power off the product.
Number buttons
Enter the password in the OSD menu, etc.
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control (+ VOL -) button.
A shortcut button to Home screen (MagicInfo or
URL Launcher).
Power on the product.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.

16
TOOLS INFO
SET
UNSET
LOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input
source.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from
HDMI 1 and HDMI 2.
It sets safe lock function.
Quickly select frequently used functions by
pressing it while a content is playing.
Return to the previous menu.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a Device ID using the numeric buttons.
Control the product using the remote control.
Cancel a value that has been set using the SET
button and control all connected products using
the remote control.
– Remote control button functions may
differ for different products.
To place batteries in the remote control (AAA x 2)

17
Before Installing the Product
(Installation Guide)
15 ˚
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Ensure that an authorised installation company installs the wall mount.
Otherwise, it may fall and cause personal injury.
Make sure to install the specified wall mount.
If the product temperature increases due to high outside temperature or the environment in which the product is installed, the
luminance decreases for product overheating mitigation and accident prevention.
Tilting Angle and Rotation
Contact Samsung Customer Service Centre for further details.
The product can be tilted at a maximum angle of 15° from a perpendicularwall surface.
To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
A
B
Figure 1.1 Side view
Air vent
Air intake Ventilation
Installation on a PerpendicularWall
AMinimum 50 mm
BAmbient temperature: Under 50°C
When installing the product on a perpendicular wall, allow at least 50 mm of space between the product and wall surface
forventilation and ensure that the ambient temperature is kept below 50°C.
Do not block the vent on the product.
Refer to the Outdoor Installation Guide. (http://displaysolutions.samsung.com)

18
Installation on an Indented Wall
Contact Samsung Customer Service Centre for further details.
AMinimum 50 mm
BMinimum 50 mm
CAmbient temperature: Under 50°C
When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 50°C.
Refer to the Outdoor Installation Guide. (http://displaysolutions.samsung.com)
A
B
B
C
Figure 1.2 Side view

19
Wall Mount Kit Specifications
Install your wall mount on a solid wall perpendicular to the floor. If you install the
product on a slanted wall, it may fall and result in severe personal injury.
Before attaching the wall mount to surfaces other than plaster board, please contact
your nearest service centre for additional information.
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the product.
Forwall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when wall mount is used or the consumer fails to follow the
product installation instructions.
Do not mount the product at more than a 15 degree tilt.
Always have two people mount the product on a wall.
Standard dimensions for wall mount kits are shown in the table below.
Unit: mm
Model name Screw hole specs (A * B) in
millimetres
Standard Screw Quantity
OH46B 995 x 500 M8 4
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Installing the Wall Mount
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.

20
Remote Control (RS232C)
Cable Connection
RS232C Cable
Interface RS232C (9 pins)
Pin TxD (No.2), RxD (No.3), GND (No.5)
Bit rate 9600 bps
Data bits 8 bit
Parity None
Stop bit 1 bit
Flow control None
Maximum length 15 m (only shielded type)
Pin assignment
1 2 3 4 5
6 7 8 9
5 4 3 2 1
9 8 7 6
<Male type> <Female type>
Pin Signal
1Detect data carrier
2Received data
3Transmitted data
4Prepare data terminal
5Signal ground
6Prepare data set
7Send request
8Clear to send
9Ring indicator