Samsung 460 User manual

LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
460
[HB460-XC]Install Guide-ENG.indd 1 2013-04-03 �� 3:26:46

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled
system for hotels and other hospitality businesses.
Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full
control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states
• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests
from trying to cheat the system by disconnecting the SBB/STB.
Power
ON
Hotel TV
Online Mode
Poll Rate 20/sec
Stand-alone
Mode
Hotel Mode On SBB/STB Online if one
success within 10 attempts
SBB/STB Online-10
consecutive fails
SBB/STB Status-
Attempt every
2secs
To set the details for Stand-alone or interactive mode, refer to pages 12-17(Setting the hotel option data : Stand-alone mode and Interactive mode)
• Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu(Stand-Alone mode)
• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen
bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎ The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm10 cm
10 cm
10 cm10 cm
10 cm
10 cm
[HB460-XC]Install Guide-ENG.indd 2 2013-04-03 �� 3:26:47

3
Contents
ENGLISH
English
yInstruction................................................................................................................................................................. 2
yOperational Modes ................................................................................................................................................... 2
yStill image warning.................................................................................................................................................... 2
ySecuring the Installation Space ................................................................................................................................. 2
yAccessories .............................................................................................................................................................. 4
yInstalling the LED TV Stand....................................................................................................................................... 4
yViewing the Connection Panel................................................................................................................................... 6
yUsing the TV’s Controller (Panel Key)......................................................................................................................... 9
yViewing the Remote Control.................................................................................................................................... 10
yConnecting the Bathroom Speakers ....................................................................................................................... 11
ySetting the Hotel Option Data ................................................................................................................................. 12
yInstalling the Wall Mount ......................................................................................................................................... 47
ySecuring the TV to the Wall..................................................................................................................................... 48
yAnti-theft Kensington Lock...................................................................................................................................... 48
ySpecifications ......................................................................................................................................................... 49
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment. To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through your local, free battery return
system.
[HB460-XC]Install Guide-ENG.indd 3 2013-04-03 �� 3:26:47

4
English
Accessories
✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎ The items’ colour and shapes may vary depending on the models.
yRemote Control & Batteries (AAA x 2)
yQuick Set up Guide
yRF Signal Gender (HG28EB460)
yPower Cord
ySafety Guide (Not available in all locations)
yScrews
yHolder-Wire Stand
✎ The stand and stand screw may not be included depending on the model.
✎ The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
Stand Components
When installing the stand, use the provided components and parts.
A-1
1 EA
HG32EB460, HG39EB460
B
1 EA
C
X7 (M4 X L12)
D
X8 (M4 X L12)
(HG28EB460)
(HG32EB460, HG39EB460)
1 EA
A-2
HG28EB460
Stand Guide Stand Screws
HG28EB460
12
✎ Place a soft cloth over a table to protect the TV, and
then place the TV on the cloth screen side down.
✎ Insert the Stand Guide into the slot on the bottom of
the T V.
B
A-2
C
(M4 X L12)
x3
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
C
(M4 X L12)
x4
Side
3
[HB460-XC]Install Guide-ENG.indd 4 2013-04-03 �� 3:26:50

5
English
HG32EB460, HG39EB460
1
4
Side View
3
2
✎ Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen side down.
✎ Insert the Stand Guide into the slot of TV bottom side.
B
A
C
(M4 X L12)
x4
Top View
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
Rear
Front
D
(M4 X L12)
x4
(Correct assembly) (Incorrect assembly)
39inch
✎Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎Make sure that at least two people lift and move the TV.
[HB460-XC]Install Guide-ENG.indd 5 2013-04-03 �� 3:26:52

6
English
Viewing the Connection Panel
HG28EB460HG32EB460, HG39EB460
3
7
2
14
5
3
HDMI IN
(DVI)
6
7
1
2
6
Power
Input
Power
Input
✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎ When connecting an external device, match the color of the connection terminal to the cable.
1 USB / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
2 ANT IN: To view television channels correctly, a signal must be received by the set from one of the following sources. An
outdoor antenna / A cable television network / A satellite network.
✎ For Norway & For Sweden: Equipment which is connected to protective earth through a network plug and/or
through other equipment connected to earth, and connected to a cable network, may cause risk of fire. To prevent
this from happening, a galvanic isolator is also installed between the equipment and the cable network when
connecting the equipment to the cable network.
3 COMPONENT / AV IN
– Connects Component video / audio.
– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect
the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PBand Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of the TV set and the other ends to corresponding
audio out jacks on the DVD.
4 HEADPHONE JACK
– Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers will be disabled.
5 HP-ID: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
When connecting Headphone to Headphone Box, it works same as Headphone function.
6 COMMON INTERFACE
[HB460-XC]Install Guide-ENG.indd 6 2013-04-03 �� 3:26:53

7
English
7 HDMI IN (DVI): Connects to the HDMI jack of a device with an HDMI output.
✎ No sound connection is needed for an HDMI to HDMI connection.
✎ Use the HDMI IN (DVI) jack for DVI connection to an external device.
✎ PC/DVI AUDIO IN input is not supported.
✎ If an HDMI to DVI cable is connected to the HDMI IN (DVI) port, the audio does not work.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. The supported resolution may differ depending on the model.
✎ Optimal resolution is 1366 X 768 @ 60 Hz. (HD Model)
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 720 x 400 31,469 70,087 28,322 -/+
MAC
640 x 480
832 x 624
1152 x 870
35,000
49,726
68,681
66,667
74,551
75,062
30,240
57,284
100,000
-/-
-/-
-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
67,500
45,000
49,702
63,981
79,976
47,712
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
75,000
60,000
59,810
60,020
75,025
59,790
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
108,000
74,250
83,500
108,000
135,000
85,500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
-/+
+/+
+/+
+/+
[HB460-XC]Install Guide-ENG.indd 7 2013-04-03 �� 3:26:54

8
English
✎ Optimal resolution is 1920 X 1080 @ 60 Hz. (FHD Model)
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 720 x 400 31,469 70,087 28,322 -/+
MAC
640 x 480
832 x 624
1152 x 870
35,000
49,726
68,681
66,667
74,551
75,062
30,240
57,284
100,000
-/-
-/-
-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35,910
53,783
56,456
75,231
59,950
59,959
74,777
74,857
32,750
81,750
95,750
130,000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
67,500
63,981
79,976
45,000
49,702
62,795
60,000
47,712
55,935
70,635
65,290
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
75,000
60,020
75,025
60,000
59,810
74,934
60,000
60,015
59,887
74,984
59,954
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
108,000
108,000
135,000
74,250
83,500
106,500
108,000
85,500
106,500
136,750
146,250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF 1280 x 720
1280 x 1024
52,500
74,620
70,000
70,000
89,040
128,943
-/+
-/-
VESA DMT /
DTV CEA 1920 x 1080p 67,500 60,000 148,500 +/+
✎ When using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack.
✎ The interlace mode is not supported.
✎ The set might operate abnormally if a non-standard video format is selected.
✎ Separate and Composite modes are supported. SOG is not supported.
[HB460-XC]Install Guide-ENG.indd 8 2013-04-03 �� 3:26:56

9
English
Using the TV's Controller
Remote control sensor
TV Controller
The image is drawn
facing the front of
the TV.
Function menu
Remote control sensor TV Controller
Function menu
Return
Down (Front)
Up (Rear)
Right
Left
HG28EB460 HG32EB460, HG39EB460
TV Controller is a multi directional button that helps navigate without remote control.
✎ The product color and shape may vary depending on the model.
✎ Exits the menu when pressing the controller more than 1 second.
✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Power on Turns the TV on by pressing the controller in standby mode.
Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on.
Selecting a channel Selects a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on, then the function menu screen appears. If
you press it again, the function menu screen disappears.
Using the Menu Selects the Menu(
m )by moving the controller in the function menu screen. The
OSD(On Screen Display) of your TV’s feature appears.
Selecting the Source Selects the Source( ) by moving the controller in the function menu screen. The
Source list screen appears.
Selecting the Contents
Home
Selects the Contents Home( ) by moving the controller in the function menu
screen. The Contents Home main screen appears.
Power Off Selects the Power Off(
P )to turn the TV off by moving the controller in the function
menu screen.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
[HB460-XC]Install Guide-ENG.indd 9 2013-04-03 �� 3:26:57

10
English
Viewing the Remote Control
✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and
Volume buttons.
Installing batteries (Battery size: AAA)
✎ NOTE
x Use the remote control within 23 feet from the TV.
x Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
x The colour and shape may vary depending on the model.
x Remocon button 'HOME' & '3D' is not supported. When
press those button, TV unit do not give ANY respond.
ABCD
ALARM
SUBT.
GUIDE
CONTENT
CLOCK
HOME
Turns the TV on and off. Display and select available video sources.
Display the Electronic Programmeme Guide (EPG)
Change channels.
View Contents Home.
Press to display information on the TV
screen.
CLOCK: When you press the INFO key in
standby mode, the TV screen will display
the time.
Exit the menu.
ALARM: Enter the hour you want the TV
to turn on.
: Turns 3D image on or off.
(Not available)
SUBT.: Displays digital subtitles.
Switch to the HOME screen.
Cut off the sound temporarily.
Directly select channels
Adjust the volume.
Display the channel list on the screen.
Display the main on-screen menu.
Quickly select frequently used functions.
Return to the previous menu.
Buttons in the Channel list, Contents
Home menu, etc.
Enter the hour you want the TV to turn on.
Use these buttons in Contents Home.
Select on-screen menu items and change
menu values.
Alternately selects Teletext, Double or Mix.
[HB460-XC]Install Guide-ENG.indd 10 2013-04-03 �� 3:26:58

11
English
Connecting the Bathroom Speakers
¦HP-ID
An additionally created Headphone Box can be installed on a bed or business desk so that users can use it conveniently. The
installation procedures are described below.
yDetailed Drawing of the Headphone Box.
EX
T
HP-ID
E
X
T
HEADPHON BOX
TV Rear Panel
Headphone Box
TV Headphones jack
White wire (Audio-L)
Shield Wire
TV HP-ID jack
Red wire + White wire
Red Wire (Audio-R)
Shield wire
[HB460-XC]Install Guide-ENG.indd 11 2013-04-03 �� 3:26:59

12
English
Setting the Hotel Option Data
To Enter: Press the MUTE →1→ 1→ 9→ ENTEREbuttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
No Item
Sub item
initial value Description
Standalone
1 Hospitality Mode Standalone Standalone Select the Hospitality mode.
2 SI Vendor *** OFF Select the SI Vendor
3 Power On
Power On
Channel EN
User Defined /
Last Saved Last Saved
This feature Configures the Power On Channel on
TV (In Interactive Mode ONLY User Defined to be
Displayed)
•UserDened:TVcanbeconguredtoPowerON
to a user defined/specified Channel.
•LastSaved:TVwillalwaysTurnOntothelast
viewed Channel
Power On
Channel *** 1
When the TV is turned on, it switches automatically
to this channel. (Available when the 'User Defined' is
selected in Power On Channel EN)
Channel Type ATV / DTV
/ CDTV ATV
This feature determines the type of Power on
Channel Type. (Available when the 'User Defined' is
selected in Power On Channel EN)
Power On Volume
EN
User Defined /
Last Saved Last Saved
This feature configures the Power On Volume of
the TV
•UserDened:-TheTVcanbeconguredto
Power ON at a user defined/specified Volume.
•LastSaved:-TheTVwillalwaysturnonatthelast
set Volume Level.
Power On Volume 0~100 10
When the TV is turned on, it switches automatically
to this volume level.
Available when the 'User Defined' is selected in
Power On Volume EN
Min Volume 0~100 0 Set the minimum Volume Levels
Max Volume 0~100 100 Set the maximum Volume Levels
Power on source TV / HDMI / AV1 /
COMP / PC TV Select the Input source when the TV is turned on
initially.
Power On Option
Power On /
Standby /
Last Option
Last Option
Determines the TV's state when power returns after
a power failure or after you have unplugged the TV
and then plugged it in again.
•Standby:StandbyState
•PowerON:PowerOn
•LastOption:LastPowerState
[HB460-XC]Install Guide-ENG.indd 12 2013-04-03 �� 3:27:00

13
English
No Item
Sub item
initial value Description
Standalone
4 Channel
Channel Setup *** Users can set channel options such as Auto Tuning,
Manual Tuning, Antenna setting, etc.
Channel Editor ***
Provided option for editing Channel Name and
Number and video.
Mute settings for channels in channel List.
Channel Bank
Editor *** - (Remark)
Assign the channels that will be included in the
channel bank.
•Youcanassignachannelnumbertoanexternal
input source in the channel editor. The channel
number is added to the channel bank editor.
Available for Hotel TVs when "Smoovie" is selected
in the Standalone SI Vendor
Mixed Channel
Map On / Off ON
This Feature enables showing/browsing all antenna
type (Air/Cable or Satellite) channels at the same
time.
•On:WhenON,guestscanaccessthecomplete
Channel Map irrespective of the selected
antenna type. The Channel list will also
populate Air as well Cable type channels.
•Off:WhenOFF,guestcanaccesstheChannel
Map corresponding to the selected antenna
type [AIR/CABLE or Satellite] only. The
Channel list/Editor will only show the selected
antenna type channels.
Dynamic SI On / Off OFF
•On:ChecktheDTVProgrammechannelnumber.
(the DTV channel editor is inaccessible)
•Off:DonotchecktheDTVProgrammechannel
number.
(the DTV channel editor is accessible, but
additional channel Programme number
update is not supported)
Channel Rescan
Message On / Off ON
When there is a mismatch between the data in
the channel map and the transmitted data , the
TV autotunes the channels to restore the data/
parameters in the channel map.
•On:WhenChannelRescanMessageisON,The
OSD showing that the channels are being
rescanned will be displayed to Hotel Guests.
•Off:AHotelAdmincanturntheChannelRescan
Message OFF, if the rescan message OSD
should not to be displayed to Hotel Guests.
Pan Euro MHEG On / Off OFF
•On:IfPanEUROMHEGissettoOff,MHEG
runs according to the existing product
specifications.
•Off:IfPanEUROMHEGissettoOn,MHEGis
ON regardless of the product specifications
or region.
5 My Channel
My channel En
On / Off
OFF Enable or disable the Mychannel feature.
Genre Editor
***
-Edit the genre for channels. (Available when
Mychannel is On)
6 Menu OSD
Picture Menu
Lock
On / Off
OFF Enable or disable the Picture Menu.
Menu display
On / Off
ON
Enable or disable the Menu.
•On:Enable
•Off:Disable
[HB460-XC]Install Guide-ENG.indd 13 2013-04-03 �� 3:27:00

14
English
No Item
Sub item
initial value Description
Standalone
7 Operation
Panel Button
Lock
Unlock / Lock /
OnlyPower / Menu/
Source
Unlock
Turns the front panel (Local key) operation on/off.
•Lock:Locksallpanelkeys
•Unlock:Unlocksallpanelkeys
•OnlyPower:Locksallkeysexceptthepowerkey
(Panel Key).
•Menu-Source:LocksonlytheMenu&Source
keys
Subtitle Auto On On / Off Off
This function turns the function On/Off that
automatically turns on the subtitles in a specific
country.
This function is supported for Hotel TVs that are
ready to receive DVB broadcasts that is heading to
Europe.
This function is related to France’s subtitle
specification. The rest of the countries’ subtitles
function according to the appropriate country
specifications regardless of the Subtitle Auto On
function.
•On:WhentheSubtitleAutoOnfunctionisON,it
follows France’s subtitle specifications.
•Off:WhentheSubtitleAutoOnfunctionis
OFF, it does not follow France’s subtitle
specifications.
8 Music Mode
Music Mode AV On / Off OFF
Music Mode as the name suggests enables the
hotel admin to audio from external sources such as
AV/Comp/PC.
While ON, guests can listen to the audio from
the external sources, even if the video jack is not
connected. If the video signal is connected, the
TV will display the video content, else will o/p
only audio. The TV Panel can be configured to
completely turn OFF or show a speaker icon, by
setting the backlight option.
Music Mode
Comp. On / Off OFF
Music Mode
Backlight On / Off OFF
This feature when turned ON , enables the Audio
Icon to be visible by turning the TV panel backlight
ON when Music mode for AV/PC/ Component is
turned ON.
[HB460-XC]Install Guide-ENG.indd 14 2013-04-03 �� 3:27:01

15
English
No Item
Sub item
initial value Description
Standalone
9External
Source
USB Media Mode Default / Automatic
/ Disable Default
This feature is used to change the behaviour of
USB devices when plugged in.
•Default:Whenthisoptionisselectedandweplug
in a USB device, a popup window appears and
the USB Media Play starts playing when you press
Enter.
•Automatic:Ifthisoptionisselected,afterplugging
in a USB device, the USB Media Play starts
automatically.
•Disable:Ifthisoptionisselectedthenpopup
windows as well as the automatic media play is
disabled. You will receive no notifications when
plugging in a USB device.
External Source
Banner On / Off ON
Displays the External Source information when you
change the TV source to external input. Press the
info key and the TV turns on.
•On:TheExternalSourceinformationisdisplayed
on the TV screen.
•Off:TheExternalSourceinformationisnot
displayed on the TV screen.
Auto source On / PC / Off OFF
Auto Source is a function which allows the TV to
automatically switch to a Connected Live source,
once a Hotel guest connects any video source such
as a Note PC, DVD player etc. without pressing any
remote or panel key.
•On:AllexternalsourcesexceptPCswillbe
applicable for Auto Switch
•PC:onlyPCssourceisapplicableforAutoswitch
•Off:NosourceswillAutoSwitch
Anynet+Return
Source
Power On Src /
Last Source / Each
model source
list(AV1, COMP,
PC, HDMI1…)
Power On
Src
Select Return Source when disconnecting from
AnyNet+
10 Eco
Solution Energy saving Off / Low / Medium / High OFF
This feature adjusts the brightness of the TV to
reduce power consumption.
•Off:Turnsofftheenergysavingfunction.
•Low:SetstheTVtolowenergysavingmode.
•Medium:SetstheTVtomediumenergysaving
mode.
•High:SetstheTVtohighenergysavingmode.
11 Logo/
Message
Welcome
Message On / Off OFF Display Welcome Message
Edit Welcome
Message *** - Edit Welcome Message
Hospitality Logo Off / BMP / AVI /
BOTH OFF Select hospitality Logo type.
Hospitality Logo
DL *** - Download hospitality logo file from USB to TV.
Logo Display
Time
3 second / 5
second / 7 second 5 second Set the logo display time.
12 Cloning
Clone TV to USB *** - Copies all settings of the TV to a USB device.
Clone USB to TV *** - Copies all settings of the USB device to the TV.
Setting Auto
Intialize On / Off OFF
When this option is kept ON, it restores the Picture
Setting, Sound Setting and other user menu
settings which were there in the clone files at every
time the power is turned on.
Therefore, if any guest changes the backlight or
colour or any other user menu item , the default
setting of the clone file is applied every time the
power is turned on.
[HB460-XC]Install Guide-ENG.indd 15 2013-04-03 �� 3:27:02

16
English
No Item
Sub item
initial value Description
Standalone
13 REACH
Server
REACH Server
update Time
OFF / 1hour /
2hour / 12:00 am
/ 2:00 am / 12:00
pm / 2:00 pm
1hour
Select the SIRCH update Time.
In the SIRCH update time , you have the option to
perform an automatic upgrade at 12:00 AM/PM or
at 2:00 AM/PM. You can perform hourly upgrades
at an interval of either 1 hr or 2 hrs.
REACH Update
Immediate On/Off Off
•On:WhenevertheTVentersStandbymode,
always performs the SIRCH Update
•Off:OnlyperformstheSIRCHUpdateatthe
selected SIRCH Update Time
REACH Server
Channel *** 87 Select SIRCH Update Channel
REACH Server
Version *** 0000 Display the version of SIRCH Clone file currently
updated in TV.
REACH Server
Group ID All, 1 - 511 ALL
Select SIRCH Group ID
S-LYNK REACH On/Off Off Enable or Disable REACH Display
S-LYNK REACH
Volume On/Off On
•On:TheTVsoundinthecurrentTVsourceis
continouly outputted even though the S-LYNK
REACH menu is displayed.
•Off:TheTVsoundinthecurrentTVsourceis
stopped when the S-LYNK REACH menu is
displayed.
TICKER On/Off Off •On:TheTICKERcontentsisdisplayed.
•Off:TheTICKERcontentsisnotdisplayed.
14 Service
Self Diagnosis
for TV *** -
Enter Self Diagnosis Menu.
•PictureTest:Usetocheckforpictureproblems.If
the problem appears in the test picture, select Yes
and follow the directions on the screen.
•SoundTest:Usethebuilt-inmelodysoundto
check for sound problems. If the problem occurs
during the test, select Yes and follow the directions
on the screen.
Upgrade Now *** Upgrade the TV software.
Service Pattern *** - Display Service pattern.
TV Reset
*** -
Reset the TV
✎ REACH(Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server
product for the more information of operating.
[HB460-XC]Install Guide-ENG.indd 16 2013-04-03 �� 3:27:03

17
English
¦Welcome Message
Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room.
– Welcome message settings are placed in Hotel Option Menu.
– Welcome message should be ON in order to display the message on power on.
Hospitality Mode Standalone
SI Vendor OFF
Power On
Channel
My Channel
Menu OSD
Operation
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Server
Service
r
Welcome Message ON
Edit Welcome Message
Hospitality Logo
ON
Hospitality Logo DL ...
Logo Display Time ...
– Welcome message can be of 25 characters and it can be edited by changing its text in Hotel Service menu.
– Following is the list of characters supported for Welcome message:
✎ In letters from A to Z only in capital letters is allowed.
– Welcome message can be edited by using navigation, color & enter key of a Remote in “Edit Welcome Message” OSD.
Move Enter Return
_
Move to Left
Move to Right
Level Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
VW X Y Z
W E L C O M E
Edit Welcome Message
A
B
C
D
– Welcome message and hotel logo cannot be active at the same time.
[HB460-XC]Install Guide-ENG.indd 17 2013-04-03 �� 3:27:04

18
English
¦Hospitality Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
– Hospitality Logo settings are in the Hospitality mode menus.
– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
– If there is a logo image stored in the memory and Hospitality Logo option is on, the Hospitality logo is displayed when
the TV is turned on.
– The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been loaded into
the TV.
Hospitality Mode Standalone
SI Vendor OFF
Power On
Channel
My Channel
Menu OSD
Operation
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Server
Service
r
Welcome Message OFF
Edit Welcome Message
Hospitality Logo
BMP
Hospitality Logo DL
Logo Display Time
5 Second
yHospitality Logo
– This option lets you choose whether the Hospitality Logo image is displayed or not.
– Initial value is OFF.
– Can be set to OFF or ON.
– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yHospitality Logo DL
– This option lets you download the logo image to the TV’s memory from a USB device.
– Wait appears while the image is being copied to the TV.
– Completed appears when the copy operation has finished successfully.
– Failed appears when the copy operation was unsuccessful.
– No USB appears if no USB device is connected.
– No File appears if there is no file to copy on the USB device or or the file is in the wrong format (must be a BMP file). If
No File appears and you have a logo file on the USB device, check the file format.
yLogo File Format
– The TV supports only the BMP and AVI format.
– The file name must be samsung.bmp or samsung.avi.
– The maximum resolution of the BMP format is 960 x 540.
– The maximum fi le size of AVI format is 30MB.
– The TV does not change the size or scale of the image.
[HB460-XC]Install Guide-ENG.indd 18 2013-04-03 �� 3:27:05

19
English
¦Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup)
from one TV set and upload the same to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
yClone TV to USB: It is an operation to copy the stored data from the specific area on
the EEPROM from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
x MUTE →1 →1 →9 →ENTER
3. Press the ▲or ▼button to select “Clone TV to USB”, then press the ENTER button.
4. The message “Clone TV to USB” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
x In Progress: during copying data to USB.
x Completed: copy operation was finished successfully.
x Failed: copy operation was not finished successfully.
x No USB: any USB is not connected.
yClone USB to TV: It is an operation to download the stored data in USB device to TV
set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order. MUTE →1
→1 →9 →ENTER
3. Press the ▲or ▼button to select “Clone USB to TV”, then press the ENTER
button.
4. The message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
x In Progress: during copying data to TV.
x Completed: copy operation was finished successfully.
x Failed: copy operation was not finished successfully.
x No USB: any USB is not connected.
x No File: there is no file to copy in USB.
✎ The operation to copy from USB to TV can be executed by pressing ENTER key for 5 seconds.
✎ The CLONE function only supports the same model series. (It does not work properly for different model series.)
For fast instant cloning during installation!
Insert USB key with master settings from first TV and press Enter key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
USB port
[HB460-XC]Install Guide-ENG.indd 19 2013-04-03 �� 3:27:06

20
English
¦Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup once.
– Hotel Plug & Play is available only one time when power is first turned ON.
– After setting up first TV and Clone TV to USB
– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change Skip
E
E
E
If Standalone Only is selected
TV will enter the RF mode.
Standalone mode
is set.
If Standalone Plug & Play
is selected
<Depending on Region, this step may not exist.>
When pressing
OK button, the
hotel menu
appears as shown
on the right.
Complete the
hotel menu
settings, and then
reset the TV. You
can use your TV.
After Searching the channels.
- After selecting the country in the country
menu, some models may proceed with
an additional option to setup the pin
number.
- If you forget the PIN code, in the Hotel
menu, select the Service →TV Reset.
And set the pin code again in the Plug
& Play.
Welcome to Samsung TV
Select your language to start the on screen setup.
Press the
udL
buttons to
move the highlight
Press the enter button to select.
The Language Setting will be applied to Main Menu and not Plug and Play.
English
Eesti
Suomi
Francais
Deutsch
Configure your TV
Select your information in the categories below.
Select the country that you're
in now.
Country Bulgaria
Picture Mode Standard
Auto Tuning
To receive channels, congure the options below
then select Scan.
Select the connected aerial
that you wand to use to get
channels
Aerial Air
Channel Type Digital & Analogue
Scan
Auto Tuning
Auto Tuning is nding channels for you...
Channels 9
40%
Stop
Digital 0
* TV 0
* Radio 0
* Data/Other 0
Analogue 0
Auto Tuning
Auto Tuning completed.
Scan AgainChange Settings
Digital 2
* TV 2
* Radio 0
* Data/Other 0
Analogue 10
Clock
-- : --
You can adjust your time to set DST, Time Zone
and clock mode.
Set current date and time
Clock Mode Auto
Date --/--/----
Time --:--
Time Zone Auto
DST Off
TV Setup Complete!
Your TV is now ready to use
OK
Easy Set Up
Standalone Plug & Play
(Continue Setup)
Standalone Only
(End Setup)
After the Plug & Play is
nished, TV will be set
to Standalone mode.
Hospitality Mode Standalone
SI Vendor OFF
Power On
Channel
My Channel
Menu OSD
Operation
Music Mode
External Source
Eco Solution
Logo/Message
Cloning
REACH Server
Service
[HB460-XC]Install Guide-ENG.indd 20 2013-04-03 �� 3:27:07