Samsung EB40D User manual

User Manual
The colour and the appearance may differ depending on the product, and
the specifications are subject to change without prior notice to improve the
performance.
Recommended hours of use per day of this product is under 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
EB40D EB48D

Table of contents
Before Using the Product
Copyright 6
Safety Precautions 7
Symbols 7
Cleaning 7
Storage 8
Electricity and Safety 8
Installation 9
Operation 11
Preparations
Checking the Components 15
Ferrite Core 16
Parts 18
Control Panel 18
Reverse Side 20
Anti-theft Lock 21
Remote Control 22
Before Installing the Product
(Installation Guide) 24
Tilting Angle and Rotation 24
Ventilation 24
Dimensions 25
Installing the Wall Mount 26
Installing the Wall Mount Kit 26
Wall Mount Kit Specifications 27
Remote Control (RS232C) 28
Cable Connection 28
Connection 29
Control Codes 30
Connecting and Using a Source
Device
Before Connecting 36
Pre-connection Checkpoints 36
Connecting to a PC 36
Connection using the D-SUB cable
(Analogue type) 36
Connection Using an HDMI Cable 37
Connection Using an HDMI-DVI Cable 37
Connecting to a Video Device 38
Connection Using the AV Cable 38
Connection Using an HDMI-DVI Cable 39
Connection Using an HDMI Cable 39
Connecting the Antenna 40
Initial Setup 41
Changing the Input source 41
Source List 41
Using MDC
MDC Programme Installation/Uninstallation 42
Installation 42
Uninstallation 42
Connecting to MDC 43
Using MDC over RS232C connections and Wi-Fi 43
Screen Adjustment
Picture Mode 44
If the input source is PC or HDMI
(when a PC is connected) 44
If the input source is TV, HDMI or AV 44
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R) 45
Picture Size 46
Picture Size 46
Position 48
Zoom/Position 48
4:3 Screen Size 49
Resolution Select 49
Auto Adjustment 50
PC Screen Adjustment 51
PIP 52
PIP Settings 52
Advanced Settings 53
2

Table of contents
Dynamic Contrast 54
Black Tone 54
Flesh Tone 54
RGB Only Mode 54
Colour Space 54
White Balance 55
Gamma 55
Motion Lighting 55
Picture Options 56
Colour Tone 57
Colour Temp. 57
Digital Clean View 57
MPEG Noise Filter 57
HDMI Black Level 58
Film Mode 58
Dynamic Backlight 58
Picture Off 59
Reset Picture 59
Sound Adjustment
Sound Mode 60
Sound Effect 61
Speaker Settings 62
Additional Settings 63
DTV Audio Level 63
Dolby Digital Comp 63
Reset Sound 64
Broadcasting
Auto Tuning 65
Auto Tuning 65
Cable Search Option 66
Aerial 67
Channel List 68
Sorting 68
Mode 68
Guide 69
Schedule Manager 70
Edit Channel 71
Edit Favourites 73
Channel Settings 76
Area 76
Manual Tuning 76
Fine Tune 77
Subtitle 78
Subtitle 78
Primary Subtitle 78
Secondary Subtitle 78
Audio Options 79
Audio Language 79
Audio Format 79
Audio Description 79
Programme Rating Lock 80
Teletext Language 81
Teletext Language 81
Primary Teletext 81
Secondary Teletext 81
Channel Lock 82
Network
Network Status 83
Network Settings 83
Network Settings (Wireless) 84
WPS(PBC) 86
Soft AP (Wi-Fi Hotspot) 87
Wi-Fi Direct 88
AllShare Settings 89
Device Name 89
Applications
Source List 90
MagicInfo 91
Playing content from the internal memory or
USB 91
Playing PC or mobile content 91
Schedule 92
3

Table of contents
MagicInfo Express Content Creator
Using MagicInfo Express Content Creator 94
Managing templates 94
Managing schedules 94
Playing photos, videos and music
(Media Play)
Read the following before using media play with
a USB device 95
Using a USB device 97
Menu items in the media content list page 98
Available buttons and features during photo
playback 99
Available buttons and features during video
playback 100
Available buttons and features during music
playback 101
Supported Subtitle and Media play file
formats 102
Subtitle 102
Compatible image file format 102
Supported music file formats 103
Supported Video Formats 103
System
Setup 106
Initial settings (Setup) 106
Menu Language 108
Multi Control 109
Configuring settings for Multi Control 109
Time 110
Clock 110
Sleep Timer 111
On Timer 111
Off Timer 112
Holiday Management 112
MagicInfo On/Off Timer 113
Eco Solution 114
Energy Saving 114
Eco Sensor 114
No Signal Power Off 115
Auto Power Off 115
Auto Protection Time 116
Screen Burn Protection 117
Pixel Shift 117
Timer 118
Immediate display 120
Side Grey 120
Ticker 121
Ticker 121
Source AutoSwitch Settings 122
Source AutoSwitch 122
General 123
Game Mode 123
Auto Power 123
Safety Lock 123
Button Lock 124
USB Auto Play Lock 124
Standby Control 124
Lamp Schedule 125
OSD Display 125
Change PIN 126
Clone Product 127
Reset System 127
Reset All 128
DivX® Video On Demand 128
Support
Software Update 129
Update now 129
Contact Samsung 129
4

Table of contents
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre 130
Testing the Product 130
Checking the Resolution and Frequency 130
Check the followings. 131
Q & A 137
Specifications
General 139
Power Consumption 141
Preset Timing Modes 142
Appendix
Responsibility for the Pay Service
(Cost to Customers) 144
Not a product defect 144
A Product damage caused by customer's fault 144
Others 144
WEEE 145
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) 145
Correct disposal of batteries in this product 145
Optimum Picture Quality and Afterimage Burn-
in Prevention 146
Optimum Picture Quality 146
Prevention of Afterimage Burn-in 146
Licence 148
Terminology 149
5

6
Before Using the Product
Chapter 01
Copyright
The contents of this manual are subject to change without notice to improve quality.
©2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.

7
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Cleaning
―Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
―Take the following steps when cleaning.
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
―Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
!
3
Wipe the product with a clean, soft and dry cloth.
•Do not use detergents that contain alcohol, solvent or
surface-active agents.
•Do not spray water or detergent directly on the product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.

8
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white-
coloured stains on the product.
―Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be
charged).
Electricity and Safety
―The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•An electric shock or fire may result.
Do not use multiple products with a single power socket.
•Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
!
Insert the power plug all the way in so it is not loose.
•An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
•An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
•Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•A fire or electric shock may result.
!
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•A fire may result.

9
Caution
Do not disconnect the power cord while the product is being used.
•The product may become damaged by an electric shock.
!
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•A fire or electric shock may result.
!
Keep the power socket where the power cord is connected unobstructed.
•The power cord must be disconnected to cut off power to the product
when an issue occurs.
•Note that the product is not completely powered down by using only
the power button on the remote.
!
Hold the plug when disconnecting the power cord from the power socket.
•An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•A fire may result.
!
Have a technician install the wall-mount hanger.
•Installation by an unqualified person can result in an injury.
•Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•An increased internal temperature may cause a fire.
!
Install the product at least 10 cm away from the wall to allow ventilation.
•An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•Children may suffocate.

10
!
Bend and keep part of the outdoor TV antenna cable hanging downwards
(the part inside the room) to prevent rainwater from entering the product.
•If rainwater enters the product, a fire or electric shock can occur.
!
When using an outdoor antenna, be sure to install the antenna away from
nearby power lines to prevent the antenna from collapsing onto them in
strong winds.
•A collapsed antenna can cause an electric shock or injury.
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•The product may fall and become damaged and/or cause an injury.
•Using the product in an area with excess vibration may damage the
product or cause a fire.
!
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•The product may fall and injure children.
•As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.

11
Caution
!
Do not drop the product while moving.
•Product failure or personal injury may result.
Do not set down the product on its front.
•The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•The product may fall and become damaged and/or cause an injury.
•Install the product only on cabinets or shelves of the right size.
!
Set down the product gently.
•Product failure or personal injury may result.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
•A fire or electric shock may result.
•Contact Samsung Customer Service Centre for repairs.
!
To move the product, first disconnect all the cables from it, including the
power cable.
•Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
•Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.
•Continued use can result in a fire or electric shock.

12
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
!
During a lightning or thunderstorm, remove the power cable and do not
touch the antenna cable.
•A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
!GAS
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•Product failure, an electric shock or fire may result from a damaged
cable.
!
Do not use or keep combustible spray or an inflammable substance near
the product.
•An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
•An increased internal temperature may cause a fire.
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•Product failure, an electric shock or fire may result.

13
Caution
!
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
•The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•A fire or electric shock may result.
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•Your hand or finger may get stuck and injured.
•Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•Product failure or personal injury may result.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•If children have had the battery in their mouths, consult your doctor
immediately.

14
When replacing the battery, insert it with the right polarity (+, -).
•Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•The customer can return used or rechargeable batteries to a nearby
public recycling centre or to a store selling the same type of the
battery or rechargeable battery.

15
Preparations
Chapter 02
-Contact the vendor where you
purchased the product if any
components are missing.
-The appearance of the components and
items sold separately may differ from the
image shown.
-The ferrite core is designed solely for the
EB48D model.
Checking the Components
Components
―Components may differ in different locations.
Quick Setup Guide
Warranty card
(Not available in some
locations)
Regulatory Guide
(Compliance)
Batteries
(Not available in some locations)
Remote Control Power cord RS232C-Stereo cable Stand base
Stand neck Ferrite Core (1EA) (optional)

16
Ferrite Core
―When you connect to the HDMI cable, make sure to coil up the end of the cable on the ferrite core. The ferrite core helps to reduce electromagnetic interference.
―Applicable to the EB48D model only.
A
A: (The distance between the ferrite core and the end of the HDMI cable connected to the HDMI port on the TV) : less than 20mm

17
Items sold separately
HDMI cable HDMI-DVI cable Video cable Audio cable RCA stereo cable
Stereo cable
-The following items can be purchased
at your nearest retailer.

18
Parts
Control Panel
AUDIOL R
VIDEO
AVIN
HDMIIN
(DVI)
RS232CIN
RGB/ DVI
AUDIOIN
RGBIN
Panel Key
Speaker
POWER
Remote sensor
―The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Panel Key
Buttons Description
Power on the product.
If you press the button when the product is turned on, the control menu will be
displayed.
―To exit the OSD menu, press and hold the panel key for at least one second.
Move to the upper or lower menu. You can also adjust the value of an option.
Change the channel in TV mode.
Move to the left or right menu.
―You can adjust the volume by moving the panel key left or right when the control
menu is not displayed.
Remote sensor
Press a button on the remote control pointing at the sensor on the front of the
product to perform the corresponding function.
―Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right.
―Store used batteries out of reach of children and recycle.
―Do not use a new and used battery together. Replace both batteries at the same time.
―Remove batteries when the remote control is not to be used for an extended period of time.

19
―If you press the button on the panel key when the product is turned on, the
control menu will be displayed.
Control menu
Return
Buttons Description
Source
Select the connected input source.
Move the panel key right to select Source in the control menu.
When the list of input sources is displayed, move the panel key up or down to select
the desired input source. Next, press the panel key.
Menu
Display the OSD menu.
Move the panel key left to select Menu in the control menu. The OSD control
screen will appear. Move the panel key right to select the desired menu.
You can select a sub-menu item by moving the panel key up, down, left, or right.
To change settings, select the desired menu and press the panel key.
MagicInfo
Enter MagicInfo mode.
Move the panel key up to select MagicInfo in the control menu.
Power off
Power off the product.
Move the panel key down to select Power off in the control menu.
Next, press the panel key.
Return Exit the control menu.

20
Reverse Side
―The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
USB (
5V 0.5A)
/ CLONING
ANT IN
AUDIOL R
VIDEO
AV IN
HDMI IN
(DVI)
RS232C IN
RGB / DVI
AUDIO IN
RGB IN
AUDIOL R
VIDEO
AVIN
HDMIIN
(DVI)
RS232CIN
RGB/ DVI
AUDIOIN
RGBIN
Port Description
USB (5V 0.5A) / CLONING
Connect to a USB memory device.
RS232C IN
Connects to MDC using an RS232C adapter.
AV IN VIDEO / L-AUDIO-R Connect to an external device using a video or Audio cable.
RGB / DVI AUDIO IN Receives sound from a PC via an audio cable.
HDMI IN (DVI)
Connects to a source device using a HDMI cable or HDMI-DVI cable.
ANT IN
Connect to an antenna cable.
RGB IN Connects to a source device using a D-SUB cable.