Samsung SyncMaster 320P Installation guide

대외비
보 존 기 한 3 년
SyncM aster 320P (LBE32PS)
Training M anual
Training M anual
SAMSUNG ELECTRONICS CO.,LTD
Visual Display Division
LCD Monitor Group

Index
Index
Overview
Introduction
Block Diagram
M ain Board Part
Service Board Part
Troubles ooting
DD C Entry
W at To D o after Board Replacement

Overview
Overview
1. Background of Development
▶To introduce into airports, cinemas, and ot er public facilities, w ere PDPs
are currently predominant
▶ To create a new market using t e advantages of LCD Monitors
▶To address standardization/officialization by enabling distribution to all regions of a
single model aving no local derivation
▶ To expand t e large LCD product market

Overview
Overview
2. Product Features
▶ VMB (Vertical Marketing Business) Model
▶MFM ( (Multi Function Monitor) :
Receives diverse support ot er t an PC (DVI, AV, S- video, Component)
▶ Response Time 8ms PVA adopted
▶ Sound function reinforced by adopting Dolby Virtual, BBE
▶ Picture quality en anced by adopting DNIe, Digital Noise Reduction
▶ RS232 Remote Control (MDC software provided)
▶ Video input: PC(D_SUB,DVI), BNC, DVI, Component, AV, S- Video
▶ Audio input: PC(D_SUB,DVI) Stereo, Video (AV, S- Video), Component, BNC
▶ Image & sound output: PC, BNC, AV, S- Video, Component out, speaker out
▶ 10W x 2 built- in speaker
▶PIP automatic switc timer function: PIP automatically pops- up w en setting time
▶ PIP, OSD menu transparency control
▶ Sleep timer (automatic switc - off) function
▶Wall & Ceiling Mounting (Optional VESA Wall Mount Kit)
▶ Network function supported
BBE (Barcus- Berry Electronics)
Sounds are clearer and finely detailed.
Bass sounds are amplified, but original
sound is recreated wit more clarity and
definition.

Overview
Overview
3. Specifications
BE40PS
M del Name SyncMaster 320P
Panel AMLCD 32” ( LTA320W2- L01)
Opt i mum Res l ut i n 1366x 768 (WXGA) 60Hz
Di s pl ay Si ze 32” (16:9)
Br i ght nes s 450cd/m2
C nt r as t Rat i 1000:1
Res p ns e Ti me 8 ms
Vi ewi ng Angl e Left/Rig t/Up/Down : 89/89/89/89
PC I nput D- SUB, DVI
Vi de Sys t em AV, S- Video, Component
P wer C ns umpt i n Less t an 180 W Max.
DPMS Less t an 5 W
S und Out put Max. 10W x 2

Introduction
Introduction(Front) (Front)
MENU :
Use this button to open the on-screen menu and exit from the menu screen or
close screen adjustment menu.
Up/Down button :
Moves from one menu item to another vertically or adjusts selected menu
values.
Adjust / Volume button :
Moves from one menu item to another horizontally or adjusts selected menu
values. Also adjusts the audio volume.
EN ER :
Activates a highlighted menu item.
SOURCE:
Switches from C mode to Video mode.
Changing the source is allowed only in external devices that are connected to the
monitor at the time. To switch Screen modes:
[ C] -> [BNC] -> [DVI] -> [AV] -> [S-Video] -> [Component]
PIP :
ush the I button to turn I screen On/Off.
More than one I couldn't be overlapped on screen as BNC and the component
use the same terminal.
PC / DVI : AV / S-Video / Component Mode
• BNC: AV / S-Video Mode
• AV / S-Video : C / BNC / DVI Mode
•Component: PC / DVI Mode
POWER: Use this button to turn the monitor on and off.
LED: ower Indicator shows owerSaver mode by green blinking.
Remote Control Sensor: Aim the remote control towards this spot on the
Monitor.
Vie ing the Control Panel
1. MENU 6. PIP
2. Navigate button (Up-Do n button) 7. Po er button
3. Adjust button (Left-Right button)/ Volume button 8. Po er indicator
4. ENTER 9. Remote Control Sensor
5. SOURCE

Introduction
Introduction(Rear) (Rear)
Vie ing the Connection Panel
Rear
1. RS232C OUT/IN(RS232C Serial Port):
MDC(Multiple Device Control) rogram ort
2. DVI IN(HDCP) (PC Video Connection Ter inal)
: Using DVI Cable (DVI-D to DVI-D)
- DVI mode (Digital C)
3. PC IN(RGB) (PC Video Connection Ter inal)
: Using D-Sub Cable (15 pin D-Sub) - C mode
(Analog C)
4. PC/DVI/BNC AUDIO IN (PC/DVI/BNC Audio
Connection Ter inal (Input))
BNC COMPONENT
5. COMPONENT AUDIO IN [L-AUDIO-R]
(Co ponent Audio Connection Ter inal (Input))
6. BNC/COMPONENT OUT
(BNC/Co ponent Connection Ter inal (Output))
- BNC (Analog PC) Connection :
connecting R, G, B, H, V port
- Co ponent Connection : connecting R, Y, b port
7. BNC/Component IN
(BNC/Co ponent Connection Ter inal (Input))

Vie ing the Connection Panel
Rear
Introduction
Introduction(Rear) (Rear)
15. POWER S/W
16. POWER IN
17. Kensington Lock
he Kensington lock is a device used to physically fix the
system when using it in a public place.
( he locking device has to be purchased separately.) AV EXT SPEAKER
8.AV AUDIO IN [L-AUDIO-R]
(Monitor Audio Connection Ter inal (Input))
9.AV OUT [VIDEO](VIDEO Connection Ter inal) :
AV mode (Output)
10.AV IN [VIDEO](VIDEO Connection Ter inal)
(Input)
11. AV OUT [S-Video](S-Video Connection Ter inal):
S-Video mode (Output)
12.AV IN [S-Video](S-Video Connection Ter inal)
(Input)
13.EXT SPEAKER(8 Ω) (EXT Speaker Connection
Ter inal)
14.MONITOR [L-AUDIO-R] (Monitor Audio Connection
Ter inal (Output))
- MONITOR OUT is the terminal for sound output of C,
DVI or BNC.

Unpacking
Unpacking
15pi n D- s ub cabl e BN39-00244B
Speaker Wi r e cabl eBN39-00315A =
Adapt r C nnect r 3705-001262
Remote Control BN59-00464A
Accessories

Accessories(Sold Separately)
Unpacking
Unpacking

Comparison
Comparison

Connecting t e M onitor
Connecting t e M onitor
1.Connect the power cord for your monitor to the power port on the
back of the monitor. Trun on power switch.
2.There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings :
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15 pin D-sub Port on the back of
your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable(DVI-D + DVI-D) to the DVI Port on the
back of your Monitor.
Connecting to a Computer
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B,
H, V port on the back of your Monitor and the 15 pin D-sub Port
on the computer.
3. Connect the audio cable for your monitor to the audio port on the
back of your computer.
4. Turn on both your computer and the monitor.

1.AV input devices like VCRs or Camcorders are connected to the AV IN
[VIDEO] or AV IN [S-VIDEO] of the monitor using the S-VHS or BNC cable.
2. Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders to
the monitor's MONITOR IN [L-AUDIO-R] using audio cables.
3. Select AV or S-Video that is connected to a VCR or Camcorders using the
Source button on the monitor's front or remote control.
4. Then, start the VCR or Camcorders with a tape inserted.
Connecting to a VCR
Connecting t e M onitor
Connecting t e M onitor

1.Connect a set of audio cables between the COMPONENT AUDIO IN
[L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player.
2. Connect a Component cable between the BNC/COMPONENT IN - PR, Y,
PB port on the Monitor and the R, Y, B jacks on the DVD player.
3. Select Co ponent that is connected to a DVD player using the Source
button on the monitor's front or remote control.
4. Then, start the DVD layer with a DVD disc inserted.
Connecting to a DVD Player
Connecting t e M onitor
Connecting t e M onitor

Connecting Speakers
Connecting t e M onitor
Connecting t e M onitor

PC Compatibility
PC Compatibility
No C ip Maker Card Name
1
ATI Radone X800Pro
2
Radone X300
3
RADEON 9600
4
S 3 Prosavage
5
Matrox G550
6
nVIDIA GeForce FX5700
7
PCX5750
8
GeForce 6600
9
GeForce FX5200
10
Inter i915G
PV Stage

Cautions W en Connecting External Devices
Cautions W en Connecting External Devices
When connecting component of DVD or STB terminal, Y, Pb, Pr color must be distinguished for normal
color to appear.
DVD or STB terminal also has separate input and output, so output terminal must be connected to
monitor.
Set terminals must be connected ith clear distinction of input and output.

Installing Stand K it
Installing Stand K it
Installing the
Semi Stand

Installing Stand Kit
(Sold separately)
Installing Stand K it
Installing Stand K it

A djusting Y our M onitor
A djusting Y our M onitor(Input) (Input)
S ur ce Li s t
Use to select PC, BNC or other external input source connected to
the Monitor.
PI P
When external A/V devices such as VCRs or DVDs are connected to
the onitor, PIP allows you to watch video fro those devices in a
s all window super-i posed on the PC Video signal. (Off/On)
1) PI P
Of f / On: Turn the PIP Screen on or off.
2) S ur ce
: PC/ DVI , BNC, AV/ S- Vi de , C mp nent
: Select the input source for the PIP.
3) Si ze : Change the Size of the PIP window.
4) P s i t i n: Change the Position of the PIP window.
Edi t Name
Na e the input device connected to the input jacks to ake your
input source selection easier.